CS101 series, a 90 nm standard cell product, is a CMOS ASIC that satisfies user’s demands for lower power consumption and higher speed. The leakage current of the transistors is the minimum level in the industry. Three types of core transistors with a different threshold voltage can be mixed according to user application.
The design rules match industry standards, and a wide range of IP macros are available for use. As well as providing a maximum of 91 million gates, approximately twice the level of integration achieved in previous products, the power consumption per gate is also reduced by about half to 2.7 nW. Also, using the highspeed library increases the speed by a factor of approximately 1.3, with a gate delay time of 12 ps.

*Technology :
- 90 nm Si gate CMOS
- 6- to 10-metal layers.
- Low-K (low permittivity) material is used for all dielectric inter-layers.
- Three different types of core transistors (low leak, standard, and high speed) can be used on the same chip.
- The design rules comply with industry standard processes.
*Power supply voltage : + 0.9 V to + 1.3 V (A wide range is supported.)
*Operation junction temperature : − 40 °C to + 125 °C (standard)
*Gate delay time : tpd = 12 ps (1.2 V, Inverter, F/O = 1)
*Gate power consumption : 2.7 nW/gate (1.2 V, 2 NAND, F/O = 1, operating rate 0.5) , 1.8 nW/gate (1.0 V, 2 NAND, F/O = 1, operating rate 0.5)
*High level of integration : Up to 91 million gates
*Reduced chip sized realized by I/O with pad.
*Two types of library sets are supported. (Performance focused (1.2 V) , Low power consumption supported (0.9 V to 1.3 V) )
*Low power consumption design (multi-power supply design and power gating) is supported.
*Compliance with industry standard design rules enables non-Fujitsu Microelectronics commercial macros to be easily incorporated.
*Compiled cell (RAM, ROM, others)
*Support for ultra high speed (up to 10 Gbps) interface macros.
*Special interfaces (LVDS, SSTL2, others)
*Supports use of industry standard libraries (.LIB).
*Uses industry standard tools and supports the optimum tools for the application.
*Short-term development using a physical prototyping tool
*One pass design using a physical synthesis tool
*Hierarchical design environment for supporting large-scale circuits
*Support for Signal Integrity, EMI noise reduction
*Support for static timing sign-off
*Optimum package range : FBGA, FC-BGA, PBGA,TEBGA

댓글을 달아 주세요 Comment

 The MC34063A by Analog Integrations Corporation, an improved second source over the
industrial standard MC34063A, is a monolithic control circuit containing the primary functions required for DC/DC converters.
The device consists of an internal temperature compensated reference, comparator, controlled duty cycle oscillator with an active current limit circuit, driver and high current output switch. This device is specifically designed to be incorporated in stepdown, step-up and voltage-inverting applications with a minimum number of external components.
The ±1.8% internal reference and low quiescent current of 1.6mA are among the improvements of the device over the competition.

* 3V to 30V Input Voltage Operation.
* Internal 1.6A Peak Current Switch.
* Internal ±1.8% Reference.
* Low Quiescent Current at 1.6mA.
* Frequency Operation from 100Hz to 100KHz.
* Current Limiting.

* Saver for Cellular phones
* DC-DC Converter Module


댓글을 달아 주세요 Comment

■ 24-bit Digital signal processor
■ 48kHz processing
■ Fully automatic multi-standard demodulation:
– B / G / I / L / M / N / D / K standards
– AM and FM mono
– FM 2-Carrier (German and Korean Zweiton) and QPSK / NICAM
■ Audio delay
– 100ms embedded
– external delay support (through I²S) with or without the internal delay activated
– independent delay on headphone and loudspeaker channels
■ Digital interfaces
– 1 x I²S asynchronous interface for stereo or downmix with sample rate converter up to 48kHz
– 1 x I²S synchronous interface which supports from stereo up to multichannel 5.1 and downmix
– 1 x I²S output support from stereo up to 5.1 speakers
– SPDIF output and pass-thru with integrated switch
■ Analog interfaces
– 5 stereo inputs
– 1 mono input
– 3 independent stereo outputs driving up to 5.1 multichannel
– 2 VRMS capability for SCART standard compliance
– pass-through mode
■ Acoustical compensation
– 3-band parametric equalizer with frequency, gain and Q control
– 5-band equalizer
– ST DynamicBass
– bass management
■ Dolby Prologic®I and II
■ Sound processing
– anti-clipping
– independent volume / balance for loudspeakers and headphone
– Smart Volume Control (SVC)
– 5-band equalizer
– loudness
– headphone: Smart Volume Control (SVC), basstreble with anti-clipping, loudness, ST Dynamic Bass and SRS® TruBass™
– beeper: 72 tones, 3 natural sounds
■ ST royalty-free processing:
– ST OmniSurround ( Virtual Dolby® Surround and Virtual Dolby® Digital compliant)
– ST Dynamic Bass
– ST Voice
■ SRS®
– SRS® TruSurround XT™ & XT 5.1 digital™
– SRS® TruSurround HD
■ Software compatible with STV83x8
■ Hardware pin to pin compatible with STV83x8

 STV83xy family is the latest sound processor from STMicroelectronics. Based on STV82xy
family success, the new STV83x8(US) and STV83x7 (EU/Asia/Middle East/Africa) are
particularly intended for the mainstream flat TV market, paving the way to enhanced sound
experience at the end customer level.

 One of the new STV83xy family key function is to ensure the proper demodulation of analog
broadcast thanks to its “Autostandard” functionality, a digital standard search engine.
The demodulation functionality based on the field proven STV82xy family, is highly robust in
all concerned area, even where overmodulation is dominant.
Five (5) analog audio auxiliary inputs and three (3) auxiliary SCART compliant outputs are
available and aimed at reducing the bill of material (BOM) by removing audio switches and

 STV83xy products are designed to fulfill all new digital or hybrid TV digital connectivity
needs thanks to a SPDIF input (bypass only) and two (2) synchronous/asynchronous inter
sound interface (I²S). One of the latter supports Dolby Digital 5.1 PCM audio, which
emphasizes on product differentiation by driving directly analog and digital multichannel
outputs. Thanks to this direct drive, TV manufacturers can fully take advantage of sound
virtualizers such as TruSurround XT (with TruSurround XT 5.1 Digital differentiated logo)
and ST Omnisurround, or be the first to feature the brand new SRS TruSurround HD, which
STMicroelectronics is the first to embed in an IC. Should the Dolby decoder provide only
Left Total/ Right Total (Lt/Rt) signal, an embedded Dolby ProLogic decoder is aimed to
provide the same output quality as with 5.1 inputs.

 New consumer application emergences, in particular the flat screen TV market, bring new
audio challenges to overcome and require more specific dedicated audio compensation
tools such as Smart Volume Control (SVC) compressor/expender on headphone and
loudspeakers, anticlipping, 3-bands parametric and 5-band graphic equalizer for a better
acoustic compensation.

 In addition to the STV83xy family, a complete digital audio (demodulation, sound processor,
audio amplifier) solution for TV can be used thanks to ST digital class D amplifier STA333
family, with additional equalization capability if required.
STMicroelectronics provides a C reference code for the TV controller to facilitate the
integration in the application software.
STV83x7 and STV83x8 are fully hardware and software compatible to answer platform
uniformization strategy.

 To support our customers with an efficient evaluation stage, STMicroelectronics provides an
evaluation bundle with board and software, a comprehensive documentation and application
STV83xy products are available in two (2) packages, LQFP100 and LQFP80 14x14. Both
are pin to pin compatible with the previous product generation.

Typical applications of the STV83xy TV sound processor family are as follows:
● analog flat panel TV
● digital ready flat panel TV
● integrated digital flat TV
● integrated digital flat TV with integrated hard drive (PVR)


댓글을 달아 주세요 Comment

✔ Low Frequency I/O Ports
✔ RS-232 & RS-423 Data Lines
✔ Power Bus Lines
✔ Monitoring & Industrial Signal and Data Ports
✔ Microprocessor Based Equipment

✔ 61000-4-2 (ESD): Air - 15kV, Contact - 8kV
✔ 61000-4-4 (EFT): 40A - 5/50ns
✔ 61000-4-5 (Surge): 24A, 8/20µs Level 2 (Line-Ground) & Level 3 (Line-Line)

✔ 800 Watts Peak Pulse Power per Line (tp=8/20µs)
✔ Unidirectional & Bidirectional Configuration
✔ ESD Protection > 40 kilovolts
✔ Available in 5V, 12V, 15V & 24V
✔ Standard Dual-In-Line Package
✔ Protects 4 to 6 Lines
✔ RoHS Compliant

✔ Molded 8 Pin Dual-In-Line (DIP) Package
✔ Weight 0.55 grams (Approximate)
✔ Available in Lead-Free Pure-Tin Plating(Annealed)
✔ Solder Reflow Temperature: Pure-Tin - Sn, 100: 260-270°C
✔ Consult Factory for Leaded Device Availability
✔ Flammability Rating UL 94V-0
✔ Packaging: 50 Pieces Per Tube
✔ Marking: Logo, Part Number, Date Code & Pin One Defined By Dot on Top of Package


댓글을 달아 주세요 Comment

General features
State-of-the-art technology:
– Diffused collector “enhanced generation”
More stable performance versus operating temperature variation
Low base drive requirement
Tighter hFE range at operating collector current
Fully insulated power package U.L. compliant
Integrated free wheeling diode
In compliance with the 2002/93/EC European Directive


 The MD2103DFX is manufactured using Diffused Collector in Planar technology adopting new and enhanced high voltage structure.
 The new MD product series show improved silicon efficiency briging updated performance to
the horizontal deflection stage.


Horizontal deflection output for TV


댓글을 달아 주세요 Comment