The AP640R5-A3 is a broadband millimeterwave singlepole double-throw (SPDT) switch in a rugged surface mount package which is compatible with high-volume solder installation. Based on PIN diode MMIC technology, the switch is designed for use in millimeterwave communication and sensor systems when low loss and high linearity are required. Typical applications are transmit/receive function for TDD systems or switching between signal paths. The robust ceramic surface mount package provides excellent electrical performance and a high degree of environmental protection for long-term reliability. All switches are screened at the operating frequencies prior to shipment for guaranteed performance. Switch is targeted for high-volume broadband applications such as satellite and fixed wireless systems.

*Surface Mount Package
*Low Loss, 1.3 dB
*High Isolation, 33 dB
*High Power Handling, +33 dBm CW
*Fast Switching Speed, 2 nS
*100% RF and DC Testing

댓글을 달아 주세요 Comment

Mimix's pHEMT technology is tested and proven in military, space and commercial applications. Mimix's proven workhorse, the CF003-03, has been fabricated in the Company's in-house foundry for over 19 years and is now available in packaged form as the CFS0303-SB.
The CFS0303-SB is a high dynamic range, lownoise, pHEMT packaged in a 4-lead SOT-343 surface-mount plastic package. It is intended for many applications operating in the 0.1GHz to 10GHz frequency range.
Mimix's high performance packaged pHEMTs are ideal for use in all applications where low-noise figure, high gain, medium power and good intercept is required. The CFS0303-SB is the perfect solution for the first or second stage of a base station LNA due to the excellent combination of low-noise figure and linearity. It is also well suited as a medium power driver stage in pole-top amplifiers and other transmit functions, particularly as the low thermal resistance allows extended power dissipation when voltage and current are adjusted for increased power and linearity.

*AIGaAs/InGaAs/AIGaAs Pseudomorphic High Electron Mobility Transistor (pHEMT)
*High Dynamic Range
*Low Current and Voltage
*Bias Point 3V and 60 mA
*0.3 dB Noise Figure at 2 GHz
*17 dBm P1dB at 2 GHz
*33 dBm OIP3 at 2 GHz
*600 m Gate Width: 50 Output Impedance
*Excellent Uniformity
*Low-Cost, Surface-Mount Package (SOT-343)
*Ro-HS Compliant Construction
*Low Thermal Resistance: 98ºC/W

*Low Noise Amplifiers and Oscillators Operating over the RF and Microwave Frequency Ranges
*Mobile Handsets, Base Station Receivers and Tower-Mount Amplifiers
*Wimax, WLAN, LEO, GEO, WLL/RLL, GPS and MMDS Applications
*General Purpose Discrete pHEMT for Other Ultra Low-Noise and Medium Power Applications

CFS0303-SB-0G00, CFS0303-SB-0G0T

댓글을 달아 주세요 Comment

The HEDS-5700 series is a family of low cost, high performance, optical incremental encoders with mounted shafts and bushings. The HEDS-5700 is available with tactile feedback for hand operated panel mount applications, or with free spinning shaft for applications requiring a pre-assembled encoder for position sensing.
The encoder contains a collimated LED light source and special detector circuit which allows for high resolution, excellent encoding performance, long rotational life, and increased reliability. The unit outputs two digital waveforms which are 90 degrees out of phase to provide position and direction information. The HEDS-5740 Series provides a third Index Channel.
The HEDS-5700 is quickly and easily mounted to a front panel using the threaded bushing, or it
can be directly coupled to a motor shaft (or gear train) for position sensing applications.

*Two Channel Quadrature Output with Optional Index Pulse
*Available with or without Static Drag for Manual or Mechanized Operation
*High Resolution – Up to 512 CPR
*Long Rotational Life, >1 Million Revolutions
*-20 to 85°C Operating Temperature Range
*TTL Quadrature Output
*Single 5 V Supply
*Available with Color Coded Leads

The HEDS-5700 with the static drag option is best suited for applications requiring digital information from a manually operated knob. Typical front panel applications include instruments, CAD/CAM systems, and audio/video control boards.
The HEDS-5700 without static drag (free spinning) is best suited for low speed, mechanized
operations. Typical applications are copiers, X-Y tables, and assembly line equipment.

HEDS-5700-K00, HEDS-5740-K00, HEDS-5701-K00, HEDS-5741-K00

댓글을 달아 주세요 Comment

PulseGuard ESD Suppressors help protect sensitive electronic equipment against electrostatic discharge (ESD). They supplement the on-chip protection of integrated circuitry and are best suited for low-voltage, high-speed applications where low capacitance is important. Data ports
utilizing such high-speed protocols as USB 2.0, IEEE1394, HDMI and DVI can benefit from this new technology. PulseGuard suppressors use polymer composite materials to suppress fast-rising ESD transients (as specified in IEC 61000-4-2), while adding virtually no capacitance to the circuit.

*RoHS compliant and lead-free
*Ultra-low capacitance
*Low leakage current
*Fast response time
*Withstands multiple ESD strikes
*Compatible with pick-and-place processes
*Available in 1000, 3000, 5000 and 10000 piece reels (EIA-RS481)

*HDTV Hardware
*Laptop/Desktop Computers
*Network Hardware
*Computer Peripherals
*Digital Cameras
*External Storage
*Set-Top Boxes

PGB1010603, PGB102ST23

댓글을 달아 주세요 Comment

 International Rectifier’s R5TM technology provides high performance power MOSFETs for space applications.
These devices have been characterized for Single Event Effects (SEE) with useful performance
up to an LET of 80 (MeV/(mg/cm2)).
The combination of low RDS(on) and low gate charge reduces the power losses in switching applications such as DC to DC converters and motor control.
These devices retain all of the well established advantages of MOSFETs such as voltage control, fast switching, ease of paralleling and temperature stability of electrical parameters.

* Single Event Effect (SEE) Hardened
* Low RDS(on)
* Low Total Gate Charge
* Simple Drive Requirements
* Ease of Paralleling
* Hermetically Sealed
* Surface Mount
* Ceramic Package
* Light Weight


댓글을 달아 주세요 Comment

Designed and manufactured in the USA, the CX9V quartz crystal is available in frequencies from 32 kHz to 160 kHz. Using micro-machining processes, this surface-mountable crystal is hermetically sealed within a ultra-miniature ceramic package to ensure high stability and low aging. Tight calibration and high frequency/temperature stability make the CX9V ideally suited for all low frequency applications.

* Ultra-miniature, surface mount design (4.1mm x 1.5mm)
* Low profile (typically 0.80mm)
* Available with glass or ceramic lid
* Hermetically sealed ceramic package
* High shock and vibration survival
* Excellent aging characteristics
* Designed for low power applications
* Full military testing available
* Designed and manufactured in the USA

* Pacemaker, defibrillator, and other implantables
* Medical instruments
Industrial, Computer, & Communications
* Smart card
* Down hole instrumentation
* Transponder / Animal migration
* Process instrumentation
Military & Aerospace
* Airborne hybrid
* Navigational computer
* Real time clock

댓글을 달아 주세요 Comment

The SMRC1D is a truly precision molded surface mountable resistor. It utilizes the Bulk Metal® Foil technology for the resistive element with its inherent low TCR and long term stability. This surface mountable product affords similar performance to the time tested VSR molded through hole product.
Voltage division with tight tracking < 5ppm/°C can be achieved with 2 randomly selected units even with a large ratio between the two values.
The molded SMRC1D, while slightly larger and heavier than the Bulk Metal® Foil VSM surface mountable chip resistor, has a rugged construction capable of withstanding significant thermal
cycling and allows for board installation without concern for tolerance shifts due to manufacturing processes or mechanical stresses.

• Small footprint
• Temperature Coefficient of Resistance: ± 4ppm/°C (0°C to + 60°C)
• Value Range: 5Ω to 33KΩ
• Tight Tolerances available to ± 0.01 percent
• Power: 0.25 watts @ + 70°C
• Excellent Long Term Stability: better than ± 0.02% maximum
• Low Thermal EMF: 0.1mV/°C maximum
• Low Noise, High Frequency Operation
• Matched Sets Available

댓글을 달아 주세요 Comment

The CX14SM is an ultra-miniature, ultra-low profile, surfacemount AT quartz crystal that is ideal for applications where space is at a premium.

* Ultra-small footprint (3.2 mm x 2.5 mm typical)
* Ultra-low profile (0.59 mm typical)
* Designed for surface-mount applications
* High shock and vibration resistance
* Custom designs available
* Full military testing available
* Designed and manufactured in the USA

* Medical telemetry Industrial, Computer, & Communications
* Instrumentation
* Handheld devices
* Animal tracking
Military & Aerospace
* Communications
* Smart munitions
* Surveillance devices
* Projectile telemetry

댓글을 달아 주세요 Comment

* Glass passivated device
* For surface mounted applications
* Ultrafast recovery times dor high efficiency
* Low forward voltage, low power loss
* Low leakage current

* Epoxy: Device has UL flammability classification 94V-O
* Metallurgically bonded construction
* Mounting position: Any
* Weight: 0.098 gram

Ratings at 25 oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%.


댓글을 달아 주세요 Comment

* Plastic package has Underwriters Laboratory Flammability Classification 94V-0
* Optimized for LAN protection applications
* Ideal for ESD protection of data lines in accordance with IEC 1000-4-2 (IEC801-2)
* Ideal for EFT protection of data lines in accordance with IEC1000-4-4 (IEC801-4)
* Low profile package with built-in strain relief for surface mounted applications
* Glass passivated junction
* Low incremental surge resistance, excellent clamping capability
* 400W peak pulse power capability with a 10/1000us waveform, repetition rate (duty cycle): 0.01% (300W above 91V)
* Very Fast response time
* High temperature soldering guaranteed: 250oC/10 seconds at terminals

Mechanical Data
* Case: JEDEC DO-214AC molded plastic over passivated chip
* Terminals: Solder plated, solderable per MIL-STD-750, Method 2026
* Polarity: For uni-directional types the band denotes the cathode, which is positive with respect to the anode under normal TVS operation
* Mounting Position: Any
* Weight: 0.002oz., 0.064g

Devices for Bidirectional Applications
For bi-directional devices, use suffix CA (e.g. P4SMA10CA). Electrical characteristics apply in both directions.


댓글을 달아 주세요 Comment