GENERAL DESCRIPTION
The AS6C62256 is a 262,144-bit low power CMOS static random access memory organized as 32,768 words by 8 bits. It is fabricated using very high performance, high reliability CMOS technology. Its standby current is stable within the range of operating temperature.
The AS6C62256 is well designed for low power application, and particularly well suited for battery back-up nonvolatile memory application.
The AS6C62256 operates with wide range power supply 2.7 ~ 5.5V

FEATURES
*Access time : 55ns
*Low power consumption:
- Operation current : 15mA (TYP.), VCC = 3.0V
- Standby current : 1μA (TYP.), VCC = 3.0V
*Wide range power supply : 2.7 ~ 5.5V
*Fully Compatible with all Competitors 5V product
*Fully Compatible with all Competitors 3.3V product
*Fully static operation
*Tri-state output
*Data retention voltage : 2.0V (MIN.)
*All products ROHS Compliant
*Package : 28-pin 600 mil PDIP, 28-pin 330 mil SOP, 28-pin 8mm x 13.4mm sTSOP

AS6C62256-55PCN, AS6C62256-55SCN, AS6C62256-55SIN, AS6C62256-55STCN
AS6C62256-55STIN
TAG CMOS, low, SRAM

Trackback :: http://datasheetblog.com/trackback/2137

댓글을 달아 주세요 Comment

GENERAL DESCRIPTION
The AMS2910 series of adjustable and fixed voltage regulators are designed to provide 1A output current and to operate down to 1V input-to-output differential. The dropout voltage of the device is guaranteed maximum 1.5V at maximum output current, decreasing at lower load currents.
On-chip trimming adjusts the reference voltage to 1%. Current limit is also trimmed, minimizing the stress under overload conditions on both the regulator and power source circuitry.
The AMS2910 devices are pin compatible with other three-terminal regulators and are offered in the 3 lead TO-220 package, in the 3Lead TO-263 (Plastic DD), in the TO-252 (D PAK) and in the low profile surface mount SOT-223 package.

FEATURES
*Three Terminal Adjustable or Fixed Voltages* 1.5V, 1.8V, 2.5V, 2.85V, 3.3V, and 5.0V
*Output Current of 1A
*Operates Down to 1V Dropout
*Line Regulation: 0.2% Max.
*Load Regulation: 0.4% Max.
*Available in TO-220, TO-263, TO-252 and SOT-223 packages

APPLICATIONS
*High Efficiency Linear Regulators
*Post Regulators for Switching Supplies
*5V to 3.3V Linear Regulator
*Battery Chargers
*Active SCSI Terminators
*Power Management for Notebook
*Battery Powered Instrumentation

AMS2910CT, AMS2910CM, AMS2910CD



Trackback :: http://datasheetblog.com/trackback/2132

댓글을 달아 주세요 Comment

General Description
The RT9198/A is designed for portable RF and wireless applications with demanding performance and space requirements. The RT9198/A performance is optimized for battery-powered systems to deliver ultra low noise and low quiescent current. Regulator ground current increases only slightly in dropout, further prolonging the battery life.
The RT9198/A also works with low-ESR ceramic capacitors, reducing the amount of board space necessary for power applications, critical in hand-held wireless devices. The RT9198/A consumes less than 0.01uA in shutdown mode and has fast turn-on time less than 50us.
The other features include ultra low dropout voltage, high output accuracy, current limiting protection, and high ripple rejection ratio. Available in the SOT-23-3, SOT-23-5,
TSOT-23-3, TSOT-23-5, SC-70-5, SC-82, MSOP-8 and WDFN-6L 2x2 packages, the RT9198/A also offers a range from 1.5V to 5.0V with 0.1V per step.

Features
*Low-Noise for RF Application
*Fast Response in Line/Load Transient
*Quick Start-Up (Typically 50us)
*< 0.01uA Standby Current When Shutdown
*Low Dropout : 220mV @ 300mA
*Wide Operating Voltage Ranges : 2.5V to 5.5V
*TTL-Logic-Controlled Shutdown Input
*Low Temperature Coefficient
*Current Limiting Protection
*Thermal Shutdown Protection
*Only 1uF Output Capacitor Required for Stability
*High Power Supply Rejection Ratio
*Custom Voltage Available
*RoHS Compliant and 100% Lead (Pb)-Free

Applications
*CDMA/GSM Cellular Handsets
*Battery-Powered Equipment
*Laptop, Palmtops, Notebook Computers
*Hand-Held Instruments
*PCMCIA Cards
*Portable Information Appliances

RT9198A, RT9198-15PU5, RT9198-16PU5

Trackback :: http://datasheetblog.com/trackback/2113

댓글을 달아 주세요 Comment

Description
The S-L2980 series is a positive voltage regulator with a low dropout voltage, high output voltage accuracy, and low current consumption developed based on CMOS technology.
A built-in low on-resistance transistor provides a low dropout voltage and a large output current. A shutdown circuit ensures long battery life.
Various types of output capacitors can be used in the S-L2980 series compared with the conventional CMOS voltage regulators. A small ceramic capacitor can also be used.

Features
*Output voltage: 1.5 V to 6.0 V, selectable in 0.1 V steps
*High accuracy output voltage: ±2.0 % accuracy
*Low dropout voltage: 120 mV typ. (at 3.0 V output product, IOUT=50 mA)
*Low current consumption: During operation: 90 μA typ., 140 μA max.
                                       During shutdown: 0.1 μA typ., 1.0 μA max.
*High peak current capability: 150 mA output is possible. (at VIN≥VOUT(S)+1.0 V)
*Built-in shutdown circuit: Ensure long battery life.
*Low ESR capacitor: A 1.0 μF capacitor can be used as the output capacitor.
                              (A 2.2 μF capacitor can be used as the output capacitor for the products
                               whose output voltage is 1.7 V or less.)
*High ripple rejection: 70 dB typ. (at 1.0 kHz)
*Small package: SOT-23-5
*Lead-free products

Applications
*Power supply for battery-powered devices
*Power supply for personal communication devices
*Power supply for home electric/electronic appliances
*Power supply for cellular phones

Trackback :: http://datasheetblog.com/trackback/2087

댓글을 달아 주세요 Comment

Product Description
The PE3501 is a high-performance dynamic UltraCMOS™ prescaler with a fixed divide ratio of 2. Its operating frequency range is 400 MHz to 3.5 GHz. The PE3501 operates on a nominal 3 V supply and draws only 12 mA. It is packaged in a small 8-lead TSSOP and is ideal for frequency scaling and microwave PLL synthesis solutions.
The PE3501 is manufactured on Peregrine’s UltraCMOS™ process, a patented variation of silicon-on-insulator (SOI) technology on a sapphire substrate, offering the performance
of GaAs with the economy and integration of conventional CMOS.

Features
*High-frequency operation: 400 MHz to 3500 MHz
*Fixed divide ratio of 2
*Low-power operation: 12 mA typical @ 3 V
*Small package: 8-lead TSSOP
*Low cost

3501-51, 3501-52, 3501-00

Trackback :: http://datasheetblog.com/trackback/2083

댓글을 달아 주세요 Comment

General Description
The IXDD404 is comprised of two 4 Amp CMOS high speed MOSFET drivers. Each output can source and sink 4 A of peak current while producing voltage rise and fall times of less
than 15ns to drive the latest IXYS MOSFETS & IGBT's. The input of the driver is compatible with TTL or CMOS and is fully immune to latch up over the entire operating range. Designed
with small internal delays, cross conduction/current shootthrough is virtually eliminated in the IXDD404. Improved speed and drive capabilities are further enhanced by very low,
matched rise and fall times.
Additionally, each driver in the IXDD404 incorporates a unique ability to disable the output under fault conditions. When a logical low is forced into the Enable input of a driver, both of it's
final output stage MOSFETs (NMOS and PMOS) are turned off. As a result, the respective output of the IXDD404 enters a tristate mode and achieves a Soft Turn-Off of the MOSFET/
IGBT when a short circuit is detected. This helps prevent damage that could occur to the MOSFET/IGBT if it were to be switched off abruptly due to a dv/dt over-voltage transient.
The IXDD404 is available in the standard 8 pin P-DIP (PI), SOIC-8 (SIA) and SOIC-16 (SIA-16) packages. For enhanced thermal performance, the SOIC-8 and SOIC-16 are also available
with an exposed grounded metal back package as the SI and SI-16 respectively.

Features
*Built using the advantages and compatibility of CMOS and IXYS HDMOSTM processes
*Latch-Up Protected up to 0.5A
*High Peak Output Current: 4A Peak
*Wide Operating Range: 4.5V to 35V
*Ability to Disable Output under Faults
*High Capacitive Load Drive Capability: 1800pF in <15ns
*Matched Rise And Fall Times
*Low Propagation Delay Time
*Low Output Impedance
*Low Supply Current
*Two identical drivers in single chip

Applications
*Driving MOSFETs and IGBTs
*Limiting di/dt under Short Circuit
*Motor Controls
*Line Drivers
*Pulse Generators
*Local Power ON/OFF Switch
*Switch Mode Power Supplies (SMPS)
*DC to DC Converters
*Pulse Transformer Driver
*Class D Switching Amplifiers

IXDD404PI, IXDD404SI, IXDD404SIA, IXDD404SI-16, IXDD404SIA-16

Trackback :: http://datasheetblog.com/trackback/2067

댓글을 달아 주세요 Comment

OVERVIEW
 The TMC 24A01/24A02/24A04/24A08/24A16 serial EEPROM has a 1,024/2,048/4,096/8,192/16,384-bit capacity, supporting the standard I2C™-bus serial interface. It is fabricated using TMC’s most advanced CMOS technology.
It has been developed for low power and low voltage applications (1.8 V to 5.5 V). One of its major feature is a hardware-based write protection circuit for the entire memory area.
Hardware-based write protection is controlled by the state of the write-protect (WP) pin.
Using one-page write mode, you can load up to 16 bytes of data into the EEPROM in a single write operation.
Another significant feature of the TMC 24A01/24A02/24A08/24A16 is its support for fast mode and standard mode.

FEATURES
I2C-Bus Interface
* Two-wire serial interface
* Automatic word address increment
EEPROM
* 1K/2K/4K/8K/16K-bit (128/256/512/1,024/2,048-byte) storage area
* 16-byte page buffer
* Hardware-based write protection for the entire EEPROM (using the WP pin)
* EEPROM programming voltage generated on chip
* 1,000,000 erase/write cycles
* 100 years data retention
Operating Characteristics
* Operating voltage
- 1.8 V to 5.5 V
* Operating current
- Maximum write current: < 3 mA at 5.5 V
- Maximum read current: < 200 mA at 5.5 V
- Maximum stand-by current: < 5 mA at 5.5 V
* Operating temperature range
- –25°C to + 70°C (commercial)
- –40°C to + 85°C (industrial)
* Operating clock frequencies
- 100 kHz at standard mode
- 400 kHz at fast mode
* Electrostatic discharge (ESD)
- 5,000 V (HBM)
- 500 V (MM)

24A01
24A02
24A04
24A08
24A16

Trackback :: http://datasheetblog.com/trackback/1630

댓글을 달아 주세요 Comment

Description
 The HIP6211 is a dual CMOS low dropout linear regulator with ultra-low-noise output, very low
dropout voltage and very low ground current.
The HIP6211 operates from a 2.5V to 5.5V input voltage range and delivers up to 300mA, with low dropout of 150 mV at 300mA.
The other features of HIP6211 include short-circuit protection and thermal-shutdown protection.
Its dual channel and low noise feature is ideal for microcontroller and DSP based handheld
applications.
Other key application areas for HIP6211 also include palmtop computers, PCMCIA cards and
WLAN cards.
The HIP6211 has a special feature that if both EN pin is enabled simultaneously the output of LDO2 delays 20us from output of LDO1 which helps to minimize inrush startup current.
The HIP6211 is available in tiny 10pin 3mm x 3mm MLF (10L-TDLMF) package with fixed output voltage versions.

Features
• 300mA+300mA dual channel high accuracy LDO
• Ultra low output noise: 140μVRMS
• Low ground current: 200μA
• Very low dropout: 150mV @300mA
• Zero shutdown supply current
• TTL-logic-controlled independent enable input
• Thermal and current limit protections
• Ultra low droop load transient response
• Ultra fast line transient response
• Tiny 10pin 3mm x 3mm MLF (10L-TDLMF ) package
• Fixed options 1.5V, 1.8V, 2.5V, 2.8V, 3.0V and 3.3V

Applications
• Dual supply handheld products
• Cellular and cordless phones
• Wireless LAN cards
• Digital camera
• MP3 / MP4 / CD player
• Pen drives
• USB Hubs and USB 2.0
• Mini PCI & PCI express cards

HIP6211-15VZ
HIP6211–33VZ
HIP6211–27VZ
TAG dual, LDO, low, MLF, noise

Trackback :: http://datasheetblog.com/trackback/1567

댓글을 달아 주세요 Comment

General description
The 74AUP1Z04 is a high-performance, low-power, low-voltage, Si-gate CMOS device,
superior to most advanced CMOS compatible TTL families.
The 74AUP1Z04 combines the functions of the 74AUP1GU04 and 74AUP1G04 with
enable circuitry and an internal bias resistor to provide a device optimized for use in
crystal oscillator applications.
This device ensures a very low static and dynamic power consumption across the entire
VCC range from 0.8 V to 3.6 V.
This device is fully specified for partial power-down applications using IOFF at output Y.
The IOFF circuitry disables the output Y, preventing the damaging backflow current through
the device when it is powered down.
When not in use the EN input can be driven HIGH, pulling up the X1 input and putting the
device in a low power disable mode. Schmitt-trigger action at the EN input makes the
circuit tolerant to slower input rise and fall times across the entire VCC range from 0.8 V to
3.6 V.
The integration of the two devices into the 74AUP1Z04 produces the benefits of a
compact footprint, lower power dissipation and stable operation over a wide range of
frequency and temperature.

Features
* Wide supply voltage range from 0.8 V to 3.6 V
* High noise immunity
* ESD protection:
* HBM JESD22-A114D Class 3A exceeds 5000 V
* MM JESD22-A115-A exceeds 200 V
* CDM JESD22-C101C exceeds 1000 V
* Low static power consumption; ICC = 0.9 mA (maximum)
* Latch-up performance exceeds 100 mA per JESD 78 Class II
* Inputs accept voltages up to 3.6 V
* Low noise overshoot and undershoot < 10 % of VCC
* IOFF circuitry provides partial Power-down mode operation at output Y
* Multiple package options
* Specified from -40 °C to +85 °C and -40 °C to +125 °C

Trackback :: http://datasheetblog.com/trackback/1129

댓글을 달아 주세요 Comment

Description
The GM66300 series is 3.0A low-dropout linear voltage regulators that provide a low-voltage, and high-current output with a minimum of external components.
The GM66300 series offers extremely low dropout (typically 400mV at 3.0A) and low ground current (typically 36mA at 3.0A).
The GM66300 series is ideal for PC add-in cards that need to convert from standard 3.0V to 2.5V and 2.5V to 1.8, down to new, lower core voltages. A guaranteed maximum
dropout voltage of 500mV over all operating conditions allows the GM66300 series to provide 2.5V from a supply as low as 3V or 1.8V . The GM66300 series also has fast transient response, for heavy switching applications. The device requires only 47μF of output capacitance to maintain stability and achieve fast transient response.
The GM66300 series is fully protected with overcurrent limiting, thermal shutdown, reversed-battery protection, reversed-lead insertion protection, and reversed-leakage
protection.
The GM66301 series offers a TTL-logic-compatible enable pin, and an error flag that indicates undervoltage and overcurrent conditions. Offered in a fixed voltages, 1.8V and 2.5V, the GM66300 series comes in the TO-220 and TO-263 packages, and is an ideal upgrade to older, NPNbased linear voltage regulators. The GM66030 is adjustable version.

Features
3.0A minimum guaranteed output current
500mV dropout voltage
Ideal for 3.0V to 2.5V conversion
Ideal for 2.5V to 1.8V conversion
1% initial accuracy
Low ground current
Current limiting and Thermal shutdown
Reversed-battery protection
Reversed-leakage protection
Fast transient response
TO-220 and TO-263 packages
TTL/CMOS compatible enable pin (GM66301 only)
Error flag output (GM66301 only)
Adjustable version (GM66302 only)

Application
LDO linear regulator for PC add-in cards
High-efficiency linear power supplies SMPS post regulator
Multimedia and PC processor supplies Low-voltage microcontrollers
Strong ARMTM processor supply

GM66300-1.8TA3T
GM66300-1.8TA3R
GM66300-1.8TB3T
GM66301-1.8TA5T
GM66302TA5T


Trackback :: http://datasheetblog.com/trackback/852

댓글을 달아 주세요 Comment