* Operating Voltage Range of 4.5 V to 5.5 V
* High-Current Outputs Drive Up To 15 LSTTL Loads
* Low Power Consumption, 80-uA Max Icc
* Typical tpd=13ns
* ±6-mA Output Drive at 5V
* Low Input Current of 1uA Max
* Inputs Are TTL-Voltage Compatible
* 3-State Outputs Drive Bus Lines or Buffer Memory Address Registers

description/ordering information
These octal buffers and line drivers are designed
specifically to improve both the performance and
density of 3-state memory address drivers, clock
drivers, and bus-oriented receivers and
transmitters. The ’HCT244 devices are organized
as two 4-bit buffers/drivers with separate
output-enable (OE) inputs. When OE is low, the
device passes noninverted data from the A inputs
to the Y outputs. When OE is high, the outputs are
in the high-impedance state.

SN74HCT244N SN74HCT244DW SN74HCT244DWR SN74HCT244NSR SN74HCT244DBR
SN74HCT244PW SN74HCT244PWR SN74HCT244PWT SNJ54HCT244J SNJ54HCT244W
SNJ54HCT244FK SN74HCT244N

FEATURES

· Output capability: bus driver
· ICC category: MSI


GENERAL DESCRIPTION

The 74HC/HCT244 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. The 74HC/HCT244 are octal non-inverting buffer/line drivers with 3-state outputs. The 3-state outputs are controlled by the output enable inputs 1OE and 2OE. A HIGH on nOE causes the outputs to assume a high impedance OFF-state. The “244” is identical to the “240”
but has non-inverting outputs.

74HC244 74HCT244 74HCU244 74HCMOS244