DESCRIPTION
The Powerline range of high power modules includes half bridge, chopper, dual, single and bi-directional switch configurations covering voltages from 600V to 3300V and currents up to 2400A.
The DIM200PKM33-A000 is a 3300V, n channel enhancement mode insulated gate bipolar transistor (IGBT) chopper module configured with the upper arm of the bridge controlled. The IGBT has a wide reverse bias safe operating area (RBSOA) plus full 10μs short circuit withstand. This device is optimised for applications requiring high thermal cycling capability.
The module incorporates an electrically isolated base plate and low inductance construction enabling circuit designers to optimise circuit layouts and utilise grounded heat sinks for safety.

FEATURES
*10μs Short Circuit Withstand
*High Thermal Cycling Capability
*Non Punch Through Silicon
*Isolated MMC Base with AlN Substrates

APPLICATIONS
*Choppers
*Traction Auxiliaries

Features
* Maximum switching current: 3.5A
* Built-in ON/OFF control function
* Built-in soft start function to suppress overshoot of output voltage in power on sequence or ON/OFF control sequence
* Built-in oscillation circuit (Oscillation frequency: TYP. 150kHz)
* Built-in overheat,overcurrent protection functions
* TO-220 package
* Variable output voltage (Output variable range: Vref to 35V/–Vref to –30V) [Possible to select step-down output/inversing output according to external connection circuit]
* PQ1CG3032FZH: Zigzag forming
- PQ1CG3032RZH: Self-stand forming
* RoHS directive compliant

Applications
* Color TV
* Digital OA equipment
* Facsimiles,printers and OA equipment
* Personal computers and amusement equipment

PQ1CG3032RZH

Descriptions
The Powerline range of high power modules includes half bridge, chopper, dual, single and bi-directional switch configurations covering voltages from 1200V to 6500V and currents up to 3600A.
The DIM300XCM45-F000 is a 4500V, soft punch through n-channel enhancement mode, insulated gate bipolar transistor (IGBT) chopper module.
The IGBT has a wide reverse bias safe operating area (RBSOA) plus 10us short circuit withstand.
This device is optimised for traction drives and other applications requiring high thermal cycling capability.
The module incorporates an electrically isolated base plate and low inductance construction enabling circuit designers to optimise circuit layouts and utilise grounded heat sinks for safety.

FEATURES
* 10μs Short Circuit Withstand
* Soft Punch Through Silicon
* Lead Free construction
* Isolated MMC Base with AlN Substrates
* High Thermal Cycling Capability
* High isolation module

APPLICATIONS
* High Reliability Inverters
* Motor Controllers
* Traction Drives
* Choppers

Description
The A3340 Hall effect switch is an extremely temperature-stable and stress-resistant sensor especially suited for operation over extended temperature ranges up to 150°C.
Superior high-temperature performance is made possible through dynamic offset cancellation, which reduces the residual offset voltage normally caused by device overmolding, temperature
dependencies, and thermal stress.
The device includes on a single silicon chip a voltage regulator, Hall-voltage generator, small-signal amplifier, chopper stabilization, Schmitt trigger, and a short-circuit protected open-collector output to sink up to 25 mA. A south pole of sufficient strength will turn the output off.
An on-board regulator permits operation with supply voltages of 4.2 to 24 volts.
Two package styles provide a magnetically optimized package for most applications.
Suffix LH is an SOT23W surface mount package and while suffix UA is a three-lead ultramini SIP for through hole mounting.
The A3340 complements the A3240, which offers the same features, but with the opposite output polarity.

Features and Benefits
* Resistant to physical stress
* Superior temperature stability
* Output short-circuit protection
* Operation from unregulated supply
* Reverse battery protection
* Sol id-state reliability
* Small size

A3340ELHLT-T
A3340EUA-T
A3340LLHLT-T
A3340LUA-T

Application
• AC and DC motor control
• Switched Mode Power Supplies

Features
• Trench + Field Stop IGBT® Technology
- Low voltage drop
- Low tail current
- Switching frequency up to 20 kHz
- Soft recovery parallel diodes
- Low diode VF
- Low leakage current
- Avalanche energy rated
- RBSOA and SCSOA rated
• ISOTOP® Package (SOT-227)
• Very low stray inductance
• High level of integration

Benefits
• Low conduction losses
• Stable temperature behavior
• Very rugged
• Direct mounting to heatsink (isolated package)
• Low junction to case thermal resistance
• Easy paralleling due to positive TC of VCEsat
• RoHS Compliant

Application
• AC and DC motor control
• Switched Mode Power Supplies
• Power Factor Correction
• Brake switch

Features
• Trench + Field Stop IGBT® Technology
- Low voltage drop
- Low tail current
- Switching frequency up to 20 kHz
- Soft recovery parallel diodes
- Low diode VF
- Low leakage current
- Avalanche energy rated
- RBSOA and SCSOA rated
• ISOTOP® Package (SOT-227)
• Very low stray inductance
• High level of integration

Benefits
• Low conduction losses
• Stable temperature behavior
• Very rugged
• Direct mounting to heatsink (isolated package)
• Low junction to case thermal resistance
• Easy paralleling due to positive TC of VCEsat
• RoHS Compliant