This 1-bit to 4-bit address driver is built using advanced dual metal CMOS technology.
The ALVCH162344 device is used in applications in which four separate memory locations must be addressed by a single address.
The ALVCH162344 has series resistors in the device output structure which will significantly reduce line noise when used with light loads.
This driver has been designed to drive ±12mA at the designated threshold levels.
The ALVCH162344 has “bus-hold” which retains the inputs’ last state whenever the input goes to a high-impedance.
This prevents floating inputs and eliminates the need for pull-up/down resistors.

* 0.5 MICRON CMOS Technology
* Typical tSK(o) (Output Skew) < 250ps
* ESD > 2000V per MIL-STD-883, Method 3015; > 200V using machine model (C = 200pF, R = 0)
* VCC = 3.3V ± 0.3V, Normal Range
* VCC = 2.7V to 3.6V, Extended Range
* VCC = 2.5V ± 0.2V
* CMOS power levels (0.4μ W typ. static)
* Rail-to-Rail output swing for increased noise margin
* Available in SSOP, TSSOP, and TVSOP packages

* 3.3V high speed systems
* 3.3V and lower voltage computing systems

* Balanced Output Drivers: ±12mA
* Low switching noise


TAG address, bus, CMOS

Trackback ::

댓글을 달아 주세요 Comment

This low-voltage (1.7V to 3.7V) digital thermometer and thermostat provides 9, 10, 11, or 12-bit digital temperature readings over a -55°C to +125°C range with ±2°C accuracy over a -25°C to +100°C range. At power-up, the DS75LX defaults to 9-bit resolution for software compatibility with the LM75. Communication with the DS75LX is achieved through a simple 2-wire serial interface. Three tri-state address pins allow up to 27 DS75LX devices to operate on the same 2-wire bus, which greatly simplifies distributed temperature-sensing applications.
The DS75LX thermostat has a dedicated open-drain output (O.S.) and programmable fault tolerance, which allow the user to define the number of consecutive error conditions that must occur before O.S. is activated. There are two thermostatic operating modes that control thermostat operation based on user-defined trip-points (TOS and THYST).

Any Thermally Sensitive System Cellular Base Stations
Telecom Switches and Routers Servers

* 1.7V to 3.7V Operating Range
* Tri-State Address Pins Allow Up to 27 Unique Bus Addresses
* Temperature Measurements Require No External Components
* Measures Temperatures from -55°C to +125°C (-67°F to +257°F)
* ±2°C Accuracy from -25°C to +100°C
* Thermometer Resolution Is User-Configurable from 9 (Default) to 12 Bits (0.5°C to 0.0625°C Resolution)
* 9-Bit Conversion Time is 25ms (max)
* Thermostatic Settings are User-Definable
* Data is Read/Written Through 2-Wire Serial Interface (SDA and SCL Pins)
* Data Lines Filtered Internally for Noise Immunity (50ns Deglitch)
* Bus Timeout Feature Prevents Lockup Problems on 2-Wire Interface
* Multidrop Capability Simplifies Distributed Temperature-Sensing Applications
* Pin/Software Compatible with the LM75
* Available in 8-Pin μSOP (μMAX®) and SO Packages


Trackback ::

댓글을 달아 주세요 Comment