Description
The IMP811/IMP812 are low-power supervisors designed to monitor voltage levels of 3.0V, 3.3V and 5.0V power supplies in low-power microprocessor (μP), microcontroller (μC) and digital systems. Each features a debounced manual reset input. The IMP811/812 are improved drop-in replacements for the Maxim MAX811/812 with extended temperature specifications to 105°C.
A reset signal is issued if the power supply voltage drops below a preset threshold and is asserted for at least 140ms after the supply has risen above the reset threshold. The IMP811 has an active-low output RESET that is guaranteed to be in the correct state for VCC down to 1.1V. The IMP812 has an active-high output RESET. The reset comparator is designed to ignore fast transients on VCC .
Low power consumption makes the IMP811/IMP812 ideal for use in portable and battery-operated equipment. Available in a compact 4-pin SOT143 package, the devices use minimal board space.

Key Features
*Improved Maxim MAX811/MAX812 replacement
-Specified to 105°C
-New 4.0V threshold option
*6μA supply current
*Monitor 5V, 3.3V and 3V supplies
*Manual reset input
*140ms min. reset pulse width
*Guaranteed over temperature
*Active-LOW reset valid with 1.1V supply (IMP811)
*Small 4-pin SOT-143 package
*No external components
*Power-supply transient-immune design

Applications
*Computers and controllers
*Embedded controllers
*Battery operated systems
*Intelligent instruments
*Wireless communication systems
*PDAs and handheld equipment

IMP812, IMP811LEUS-T, IMP811MEUS-T, IMP812LEUS-T, IMP812MEUS-T

General Description
The AME41-ADJ is a micropower 3-terminal band-gap voltage regulator diode with a user adjustable output voltage. It operates over a 30mA to 20mA current range. Each circuit is trimmed at wafer sort to provide a ±0.50% initial tolerance. The design of the AME41-ADJ allows for a large range of load capacitances and operating currents. The low start-up current makes these parts ideal for battery applications.
AME offers this part in a TO-92 and SOP-8 packages as well as the space saving SOT-23.

Features
*Small Packages: SOT-23, TO-92, SOP-8
*Tolerates Capacitive Loads
*User Adjustable Reverse Breakdown Voltage
*Tight Voltage Tolerance ------- ±0.5%
*Wide Operating Current ------- 30mA to 20mA
*Wide Temperature Range ----- -40oC to +85oC
*Low Temperature Coefficient --100ppm/oC (max)
*Excellent Transient Response
*All AME's Lead Free Products Meet RoHS Standards

Applications
*Portable Electronics
*Power Supplies
*Computer Peripherals
*Data Acquisition Systems
*Battery Chargers
*Consumer Electronics

AME41BEET, AME41BEETZ, AME41BEAT, AME41BEAT-1

DESCRIPTION
The AIC1660 is a monolithic CMOS switched capacitor voltage converter. Designed to be an improved direct replacement for the popular 7660 and LTC1044, the main function of the AIC1660 is to convert a positive input voltage in the range of 1.5V to 6V to the corresponding negative output voltage in the range of -1.5V to -6V. The input voltage can also be doubled (VOUT = 2VIN ), divided (VOUT = VIN /2 ), or multiplied (VOUT = ±nVIN), as shown in application examples.
The chip contains a series DC power supply regulator, oscillator, control circuitry and four output power MOS switches. The frequency of oscillator can be lowered by the addition of an external capacitor to the OSC pin, or the oscillator may be over-driven by an external clock.
The boost function is available to raise the oscillator frequency to optimize performance in specific applications. The “LV” terminal may be tied to GND to improve low input voltage (VIN £3V) operation, or be left floating for input voltage larger than 3V to improve power dissipation.
The AIC1660 provides performance superior to previous designs by combining low output impedance, low quiescent current with high efficiency, and by eliminating diode drop voltage losses. The only required external components are two low cost electrolytic capacitors.

FEATURES
*Lowest Output Impedance (Typical 35W at VIN=5V).
*Improved Direct Replacement for 7660.
*1.5V to 6V Operation.
*No External Diode Required.
*Simple Conversion of +5V to -5V.
*Low Quiescent Current (Typical 36mA at VIN=5V).
*High Power Efficiency (Typical 98%)
*Boost Pin for Higher Switching Frequency.
*Improved SCR Latchup Protection.

APPLICATIONS
*RS-232 Power Supplies.
*Handheld Instruments.
*Data Acquisition Systems.
*Supply Splitter, VOUT= ±VIN /2.
*Operational Amplifier Supplies.
*Panel Meter.

AIC1660CN, AIC1660CS

General Description
MDT7822 is a voltage detector which can generate a low level signal whenever the input voltage (supply voltage) falls below threshold voltage level (2.2v).

Features
*Low detectable voltage 2.2V
*Low power consumption
*Built-in hysteresis characteristic

Applications
*Battery detectors
*Power checkers
*Micro-controller reset

MDT7822ST

General Description
The AME1117 is a 1A low-dropout positive voltage regulator. It is available in fixed and adjustable output voltage versions. Overcurrent and thermal protection are integrated onto the chip. Output current will limit as while it reaches the pre-set current or temperature limit. The dropout voltage is specified at 1.4V Maximum at full rated output current. The AME1117 series provides excellent regulation over line, load and temperature variations.

Features
*Low Dropout Voltage ----- 1.4V at 1A
*Adjustable or Fixed Voltages: 1.8V, 2.5V, 3.3V, 5.0V
*Adjust Pin Current Less than 120mA
*Overcurrent Protection
*Thermal Protection
*Available in TO-220, TO-252, SOT-223
*All AME's Lead Free Products Meet RoHS Standards

Applications
*High Efficiency Linear Regulators
*Post Regulators for Switching Supplies
*5V to 3.3V Voltage Converter
*Battery Charger

AME1117ACBTZ, AME1117BCBTZ, AME1117CCBTZ, AME1117DCBTZ

Description
GM6250 combine high accuracy with very low power consumption, and provides high output current even when the application requires extremely low input-output voltage differential.
GM6250 includes a precision voltage reference, an error correction circuit, over-temperature protection, and a current limited output driver. Fast transient response to load variations provides excellent stability under dynamic load conditions.
GM6250 comes in SOT-23 (150mW), SOT-89 (500mW) and TO-92 packages.

Features
*Maximum output current 250mA (within maximum power dissipation)
*Output voltage: from 1.8 V to 5.0V in 0.1V increments
*Output voltage ±2%
*CMOS low power consumption, typically 1.0μA at VOUT = 5.0V
*Input stability typically 0.2%/ V
*Ultra-low dropout voltage 0.38V @ IOUT = 200mA at VOUT = 5.0V
*Small input/ output differential: 0.4V at 160mA (VOUT = 3.3V)
*SOT-23 (150mW), SOT-89 (500mW) and TO-92 packages

Application
*Palmtops
*Portable Cameras
*Video Recorders
*Battery Powered Equipment
*Reference Voltage Sources

GM6250-1.5ST23R, GM6250-1.5ST89R, GM6250-1.5T92B, GM6250-1.5T92RL

GENERAL DESCRIPTION
The AMS3100-2.5 are two-terminal micropower band-gap voltage reference that feature a very low dynamic impedance and good temperature coefficient, operating over a 20μA to 20mA current range. AMS3100-2.5 is trimmed at wafer test level to optimize the temperature coefficient and tight output voltage tolerance. The advanced process technology used, makes the AMS3100-2.5 exceptionally tolerant of capacitive loading, making it easy to use in almost any reference application. The wide dynamic operating range allows its use with widely varying supplies with excellent regulation. The extremely low power drain, makes these reference diodes useful for micropower circuitry. These voltage references can be used to make portable meters, regulators or general purpose analog circuitry with battery life approaching shelf life. Further more, the wide operating current allows it to replace older references with a tight tolerance part. Pin to pin compatible with other standard industry references, the AMS3100-2.5 offers the advantage of long term stability at low cost.
The AMS3100-2.5 is operating over a -40°C to 85°C temperature range and is available in the space saving SOT-23 package.

FEATURES
*±12 mV (±0.5%) max. initial tolerance (A grade)
*Operating Current 20μA to 20mA
*Low Voltage Reference 2.50V
*Max. 0.5Ω Dynamic Impedance (A grade)
*Low Temperature Coefficient
*SOT-23 Package Available
*Low cost

APPLICATIONS
*Battery Powered Systems
*Instrumentation
*A/D, D/A Converters
*Temperature measurement
*Current sources
*Notebook/Personal Computer
*Monitors/ VCR/ TV
*Pagers

AMS3100-2.5AM, AMS3100-2.5BM, AMS3100-2.5CM

GENERAL DESCRIPTION
The AMS2911 series of adjustable and fixed voltage regulators are designed to provide 1A output current and to operate down to 1V input-to-output differential. The dropout voltage of the device is guaranteed maximum 1.5V at maximum output current, decreasing at lower load currents.
On-chip trimming adjusts the reference voltage to 1%. Current limit is also trimmed, minimizing the stress under overload conditions on both the regulator and power source circuitry.
The AMS2911 devices are pin compatible with other three-terminal regulators and are offered in the 3 lead TO-220 package, in the 3Lead TO-263 (Plastic DD), in the TO-252 (DPAK) and in the low profile surface mount SOT-223 package.

FEATURES
*Three Terminal Adjustable or Fixed Voltages* 1.5V, 1.8V, 2.5V, 2.85V, 3.3V, and 5.0V
*Output Current of 1A
*Operates Down to 1V Dropout
*Line Regulation: 0.2% Max.
*Load Regulation: 0.4% Max.
*Available in TO-220, TO-263, TO-252 and SOT-223 packages

APPLICATIONS
*High Efficiency Linear Regulators
*Post Regulators for Switching Supplies
*5V to 3.3V Linear Regulator
*Battery Chargers
*Active SCSI Terminators
*Power Management for Notebook
*Battery Powered Instrumentation

AMS2911CT, AMS2911CM, AMS2911CD

DESCRIPTION
TK10651 is a noise reduction IC developed mainly for cordless phones. It is also used for voice and data communications. It has a built-in compressor circuit to increase the average modulation level and an expander circuit to reduce the noise level. The expander restores the
original dynamics of the input signal. The result is a high quality signal transmission with low noise. Among the many functions included, analog switching of the input and output signal is particularly useful in cordless telephones. Separate data input and output are provided. The audio signal path can be muted during data transmission. The signal path used for data transmission bypasses the compressor and expander circuits.

FEATURES
*Data and Voice Inputs
*Data and Voice Outputs
*Low Supply Current
*Regulated Output
*Wide Operating Voltage Range
*Low Standby Current
*Microphone Amplifier
*IDC Circuit (Instantaneous Deviation Control)

APPLICATIONS
*Portable Instrumentation
*Cordless Telephones
*Handy Talkies
*Interphones
*Amateur Radio Transceivers

TK10651MTL, TK10651M

Description
The GM5511 series are highly precise and, low power consumption voltage detectors. Detect voltage is extremely accurate with minimal temperature drift. Both CMOS and N channel open drain output configurations are available.

Features
*Highly accurate: ± 2%
*Low power consumption: TYP 0.7μA [VIN = 1.5V]
*Detect voltage range: 1.6V to 6.0V in 0.1V increments
*Operating voltage range: 0.7 to 10.0V
*Detect voltage temperature characteristic: TYP ± 100 ppm/ °C
*Output Configuration: CMOS or N channel open drain
*SOT-23 (150mW) mini-mold SOT-89 (500mW) mini-power mold
*Alternate of " MAX809"

Application
*Computers
*Controllers
*Intelligent Instruments
*Critical μP and uC Power Monitoring
*Portable/ Battery- Powered Equipment
*Automotive

GM5511C-1.8ST23R, GM5511C-1.8ST89R, GM5511C-3.0ST23R,
GM5511C-4.0ST23R, GM5511C-4.2ST23R, GM5511C-2.9ST23R