General Description
The IXDN402/IXDI402/IXDF402 consists of two 2 Amp CMOS high speed MOSFET drivers. Each output can source and sink 2A of peak current while producing voltage rise and fall times of less than 15ns to drive the latest IXYS MOSFETs & IGBTs. The input of the driver is TTL or CMOS compatible and is fully immune to latch up over the entire operating range. A patent-pending circuit virtually eliminates cross conduction and current shoot-through. Improved speed and drive capabilities are further enhanced by very low and matched rise and fall times.
The IXDN402 is configured as a dual non-inverting gate driver, the IXDI402 as a dual inverting gate driver, and the IXDF402 as a dual inverting + non-inverting gate driver.
The IXDN402/IXDI402/IXDF402 family are available in the standard 8 pin P-DIP (PI), SOP-8 (SI) and SOP-16 (SI-16) packages respectively.

Features
*Built using the advantages and compatibility of CMOS and IXYS HDMOSTM processes
*Latch-Up Protected Over Entire Operating Range
*High Peak Output Current: 2A Peak
*Wide Operating Range: 4.5V to 25V
*High Capacitive Load Drive Capability: 1000pF in <10ns
*Matched Rise And Fall Times
*Low Propagation Delay Time
*Low Output Impedance
*Low Supply Current
*Two Drivers in Single Chip

Applications
*Driving MOSFETs and IGBTs
*Motor Controls
*Line Drivers
*Pulse Generators
*Local Power ON/OFF Switch
*Switch Mode Power Supplies (SMPS)
*DC to DC Converters
*Pulse Transformer Driver
*Class D Switching Amplifiers

IXDN402PI, IXDN402SI, IXDN402SI-16, IXDI402PI, IXDI402SI, IXDI402SI-16, IXDF402PI

Trackback :: http://datasheetblog.com/trackback/2819

댓글을 달아 주세요 Comment

General Description
The IXDN402/IXDI402/IXDF402 consists of two 2 Amp CMOS high speed MOSFET drivers. Each output can source and sink 2A of peak current while producing voltage rise and fall times of less than 15ns to drive the latest IXYS MOSFETs & IGBTs. The input of the driver is TTL or CMOS compatible and is fully immune to latch up over the entire operating range. A patent-pending circuit virtually eliminates cross conduction and current shoot-through. Improved speed and drive capabilities are further enhanced by very low and matched rise and fall times.
The IXDN402 is configured as a dual non-inverting gate driver, the IXDI402 as a dual inverting gate driver, and the IXDF402 as a dual inverting + non-inverting gate driver. The IXDN402/IXDI402/IXDF402 family are available in the standard 8 pin P-DIP (PI), SOP-8 (SIA) and SOP-16 (SIA-16) packages. For enhanced thermal performance, the SOP-8 and SOP-16 are also available with an exposed grounded backmetal package as the SI and SI-16 respectively.

Features
*Built using the advantages and compatibility of CMOS and IXYS HDMOSTM processes
*Latch-Up Protected Over Entire Operating Range
*High Peak Output Current: 2A Peak
*Wide Operating Range: 4.5V to 25V
*High Capacitive Load Drive Capability: 1000pF in <10ns
*Matched Rise And Fall Times
*Low Propagation Delay Time
*Low Output Impedance
*Low Supply Current
*Two Drivers in Single Chip

Applications
*Driving MOSFETs and IGBTs
*Motor Controls
*Line Drivers
*Pulse Generators
*Local Power ON/OFF Switch
*Switch Mode Power Supplies (SMPS)
*DC to DC Converters
*Pulse Transformer Driver
*Class D Switching Amplifiers

IXDI402, IXDF402, IXDN402PI, IXDI402PI, IXDF402PI

Trackback :: http://datasheetblog.com/trackback/2721

댓글을 달아 주세요 Comment

General Description
The IXDD414 is a high speed high current gate driver specifically designed to drive the largest MOSFETs and IGBTs to their minimum switching time and maximum practical frequency limits. The IXDD414 can source and sink 14A of peak current while producing voltage rise and fall times of less than 30ns. The input of the driver is compatible with TTL or CMOS and is fully immune to latch up over the entire operating range. Designed with small internal delays, cross conduction/current shootthrough is virtually eliminated in the IXDD414. Its features and wide safety margin in operating voltage and power make the IXDD414 unmatched in performance and value.
The IXDD414 incorporates a unique ability to disable the output under fault conditions. When a logical low is forced into the Enable input, both final output stage MOSFETs (NMOS and PMOS) are turned off. As a result, the output of the IXDD414 enters a tristate mode and achieves a Soft Turn-Off of the MOSFET/IGBT when a short circuit is detected. This helps prevent damage that could occur to the MOSFET/IGBT if it were to be switched off abruptly due to a dv/dt over-voltage transient.
The IXDD414 is available in the standard 8-pin P-DIP (PI), 5-pin TO-220 (CI) and in the TO-263 (YI) surface-mount package.

Features
*Built using the advantages and compatibility of CMOS and IXYS HDMOSTM processes.
*Latch-Up Protected
*High Peak Output Current: 14A Peak
*Wide Operating Range: 4.5V to 25V
*Ability to Disable Output under Faults
*High Capacitive Load Drive Capability: 15nF in <30ns
*Matched Rise And Fall Times
*Low Propagation Delay Time
*Low Output Impedance
*Low Supply Current

Applications
*Driving MOSFETs and IGBTs
*Limiting di/dt under Short Circuit
*Motor Controls
*Line Drivers
*Pulse Generators
*Local Power ON/OFF Switch
*Switch Mode Power Supplies (SMPS)
*DC to DC Converters
*Pulse Transformer Driver
*Class D Switching Amplifiers

IXDD414YI, IXDD414CI

Trackback :: http://datasheetblog.com/trackback/2609

댓글을 달아 주세요 Comment

Features
*Glass Passivated Die Construction
*Ultra-Fast Switching
*Low Forward Voltage Drop
*Low Reverse Leakage Current
*High Surge Current Capability
*Plastic Material has UL Flammability Classification 94V-O

Mechanical Data
*Case: ITO-220A, Full Molded Plastic
*Terminals: Plated Leads Solderable per MIL-STD-202, Method 208
*Polarity: See Diagram
*Weight: 2.24 grams (approx.)
*Mounting Position: Any
*Mounting Torque: 11.5 cm-kg (10 in-lbs) Max.
*Lead Free: For RoHS / Lead Free Version, Add “-LF” Suffix to Part Number

UF800F, UF801F, UF802F, UF803F, UF804F, UF806F, UF808F

Trackback :: http://datasheetblog.com/trackback/2401

댓글을 달아 주세요 Comment

General Description
The IXDD409/IXDI409/IXDN409 are high speed high current gate drivers specifically designed to drive the largest MOSFETs and IGBTs to their minimum switching time and maximum practical frequency limits. The IXDD409/IXDI409/IXDN409 can source and sink 9A of peak current while
producing voltage rise and fall times of less than 30ns. The input of the drivers are compatible with TTL or CMOS and are fully immune to latch up over the entire operating range.
Designed with small internal delays, cross conduction/current shoot-through is virtually eliminated in the IXDD409/IXDI409/IXDN409. Their features and wide safety margin in operating voltage and power make the drivers unmatched in performance and value.
The IXDD409 incorporates a unique ability to disable the output under fault conditions. When a logical low is forced into the Enable input, both final output stage MOSFETs (NMOS and PMOS) are turned off. As a result, the output of the IXDD409 enters a tristate mode and achieves a Soft Turn-Off of the MOSFET/IGBT when a short circuit is detected.
This helps prevent damage that could occur to the MOSFET/IGBT if it were to be switched off abruptly due to a dv/dt overvoltage transient.
The IXDN409 is configured as a non-inverting gate driver, andthe IXDI409 is an inverting gate driver.
The IXDD409/IXDI409/IXDN409 are available in the standard 8-pin P-DIP (PI), SOP-8 (SI), 5-pin TO-220 (CI) and in the TO-263 (YI) surface-mount packages.

Features
*Built using the advantages and compatibility of CMOS and IXYS HDMOSTM processes.
*Latch Up Protected
*High Peak Output Current: 9A Peak
*Operates from 4.5V to 25V
*Ability to Disable Output under Faults
*High Capacitive Load Drive Capability: 2500pF in <15ns
*Matched Rise And Fall Times
*Low Propagation Delay Time
*Low Output Impedance
*Low Supply Current

Applications
*Driving MOSFETs and IGBTs
*Motor Controls
*Line Drivers
*Pulse Generators
*Local Power ON/OFF Switch
*Switch Mode Power Supplies (SMPS)
*DC to DC Converters
*Pulse Transformer Driver
*Limiting di/dt under Short Circuit
*Class D Switching Amplifiers

IXDD409SI, IXDD409YI, IXDD409CI, IXDI409PI, IXDI409SI, IXDI409YI, IXDI409CI

Trackback :: http://datasheetblog.com/trackback/2345

댓글을 달아 주세요 Comment

Features
*Glass Passivated Die Construction
*Ideally Suited for Automatic Assembly
*Low Forward Voltage Drop, High Efficiency
*Surge Overload Rating to 100A Peak
*Low Power Loss
*Ultra-Fast Recovery Time
*Plastic Case Material has UL Flammability Classification Rating 94V-O

Mechanical Data
*Case: SMC/DO-214AB, Molded Plastic
*Terminals: Solder Plated, Solderable per MIL-STD-750, Method 2026
*Polarity: Cathode Band or Cathode Notch
*Marking: Type Number
*Weight: 0.21 grams (approx.)
*Lead Free: For RoHS / Lead Free Version, Add “-LF” Suffix to Part Number

UF3B-T3, UF3D-T3, UF3G-T3, UF3J-T3, UF3K-T3

Trackback :: http://datasheetblog.com/trackback/2264

댓글을 달아 주세요 Comment

General Description
The IXDN430/IXDI430/IXDD430/IXDS430 are high speed high current gate drivers specifically designed to drive MOSFETs and IGBTs to their minimum switching time and maximum
practical frequency limits. The IXD_430 can source and sink 30A of peak current while producing voltage rise and fall times of less than 30ns. The input of the drivers are compatible with TTL or CMOS and are fully immune to latch up over the entire operating range. Designed with small internal delays, cross conduction/current shoot-through is virtually eliminated in all
configurations. Their features and wide safety margin in operating voltage and power make the drivers unmatched in performance and value.
The IXD_430 incorporates a unique ability to disable the output under fault conditions. The standard undervoltage lockout is at 12.5V which can also be set to 8.5V in the IXDS430SI. When a logical low is forced into the Enable inputs, both final output stage MOSFETs (NMOS and PMOS) are turned off. As a result, the output of the IXDD430 enters a tristate mode and enables a Soft Turn-Off of the MOSFET when a short circuit is detected. This helps prevent damage that could occur to the MOSFET if it were to be switched off abruptly due to a dv/dt
over-voltage transient.
The IXDN430 is configured as a noninverting gate driver, and the IXDI430 is an inverting gate driver. The IXDS430 can be configured either as a noninverting or inverting driver. The IXD_430 are available in the standard 28-pin SIOC (SI-CT), 5-pin TO-220 (CI), and in the TO-263 (YI) surface mount packages. CT or 'Cool Tab' for the 28- pin SOIC package refers to the backside metal heatsink tab.

Features
*Built using the advantages and compatibility of CMOS and IXYS HDMOSTM processes
*Latch-Up Protected
*High Peak Output Current: 30A Peak
*Wide Operating Range: 8.5V to 35V
*Under Voltage Lockout Protection
*Ability to Disable Output under Faults
*High Capacitive Load Drive Capability: 5600 pF in <25ns
*Matched Rise And Fall Times
*Low Propagation Delay Time
*Low Output Impedance
*Low Supply Current

Applications
*Driving MOSFETs and IGBTs
*Motor Controls
*Line Drivers
*Pulse Generators
*Local Power ON / OFF Switch
*Switch Mode Power Supplies (SMPS)
*DC to DC Converters
*Pulse Transformer Driver
*Limiting di/dt Under Short Circuit
*Class D Switching Amplifiers

IXDD430YI, IXDD430CI, IXDI430YI, IXDI430CI, IXDN430YI, IXDN430CI, IXDS430SI

Trackback :: http://datasheetblog.com/trackback/2192

댓글을 달아 주세요 Comment

General Description
The IXDD404 is comprised of two 4 Amp CMOS high speed MOSFET drivers. Each output can source and sink 4 A of peak current while producing voltage rise and fall times of less
than 15ns to drive the latest IXYS MOSFETS & IGBT's. The input of the driver is compatible with TTL or CMOS and is fully immune to latch up over the entire operating range. Designed
with small internal delays, cross conduction/current shootthrough is virtually eliminated in the IXDD404. Improved speed and drive capabilities are further enhanced by very low,
matched rise and fall times.
Additionally, each driver in the IXDD404 incorporates a unique ability to disable the output under fault conditions. When a logical low is forced into the Enable input of a driver, both of it's
final output stage MOSFETs (NMOS and PMOS) are turned off. As a result, the respective output of the IXDD404 enters a tristate mode and achieves a Soft Turn-Off of the MOSFET/
IGBT when a short circuit is detected. This helps prevent damage that could occur to the MOSFET/IGBT if it were to be switched off abruptly due to a dv/dt over-voltage transient.
The IXDD404 is available in the standard 8 pin P-DIP (PI), SOIC-8 (SIA) and SOIC-16 (SIA-16) packages. For enhanced thermal performance, the SOIC-8 and SOIC-16 are also available
with an exposed grounded metal back package as the SI and SI-16 respectively.

Features
*Built using the advantages and compatibility of CMOS and IXYS HDMOSTM processes
*Latch-Up Protected up to 0.5A
*High Peak Output Current: 4A Peak
*Wide Operating Range: 4.5V to 35V
*Ability to Disable Output under Faults
*High Capacitive Load Drive Capability: 1800pF in <15ns
*Matched Rise And Fall Times
*Low Propagation Delay Time
*Low Output Impedance
*Low Supply Current
*Two identical drivers in single chip

Applications
*Driving MOSFETs and IGBTs
*Limiting di/dt under Short Circuit
*Motor Controls
*Line Drivers
*Pulse Generators
*Local Power ON/OFF Switch
*Switch Mode Power Supplies (SMPS)
*DC to DC Converters
*Pulse Transformer Driver
*Class D Switching Amplifiers

IXDD404PI, IXDD404SI, IXDD404SIA, IXDD404SI-16, IXDD404SIA-16

Trackback :: http://datasheetblog.com/trackback/2067

댓글을 달아 주세요 Comment

Features
• UltraFast switching speed optimized for operating frequencies 8 to 40kHz in hard switching, 200kHz in resonant mode soft switching
• Generation 4 IGBT design provides tighter parameter distribution and higher efficiency (minimum switching and conduction losses) than prior generations
• Industry-benchmark Super-247 package with higher power handling capability compared to same footprint TO-247
• Creepage distance increased to 5.35mm
• Lead-Free

Benefits
• Generation 4 IGBT's offer highest efficiencies available
• Maximum power density, twice the power handling of the TO-247, less space than TO-264
• IGBTs optimized for specific application conditions
• Cost and space saving in designs that require multiple, paralleled IGBTs
• HEXFREDTM antiparallel Diode minimizes switching losses and EMI

Trackback :: http://datasheetblog.com/trackback/1099

댓글을 달아 주세요 Comment

Features

* Diffused Junction
* Low Forward Voltage Drop
* High Current Capability A B A
* High Reliability
* High Surge Current Capability

Mechanical Data

* Case: DO-201AD, Molded Plastic D
* Terminals: Plated Leads Solderable per MIL-STD-202, Method 208
* Polarity: Cathode Band
* Weight: 1.2 grams (approx.)
* Mounting Position: Any
* Marking: Type Number
* Lead Free: For RoHS / Lead Free Version, Add “-LF” Suffix to Part Number, See Page 4

UF5400-T3
UF5400-TB
UF5400
UF5401-T3
UF5401-TB
UF5401
UF5408

Trackback :: http://datasheetblog.com/trackback/810

댓글을 달아 주세요 Comment