Description
TransDimension’s UHC124 is a four-port, single chip USB Host controller that is the first of a family of integrated low-cost, high-performance controllers optimized and specifically designed for embedded systems, mobile communication, and consumer products. It is a non-PCI controller that supports USB Specification Rev. 2.0 compliant full-speed (12Mb/s) and low-speed (1.5Mb/s) USB devices. It is the only non-PCI controller that has been proven to run at USB full speed, even running under a full USB stack. The UHC124 controller enables an embedded system to function as a USB Host, dramatically expanding the degree of interconnectivity and extending the applicability of USB into many new areas. In addition to silicon, development kits, USB Host Stack, device drivers for most products, and interface code to the UHC124 for numerous RTOS’ are available via our wholly owned subsidiary, SoftConnex Technologies, Inc.
The UHC124 has unique, patent-pending features that are indispensable for achieving high data throughput and low interrupt rates. It is the only one on the market that is designed from the ground up for embedded applications with features like batch processing, multiple interrupt modes, separate data and descriptor memory, and double buffering. It is optimized for cost,
performance and ease of development. The software/hardware co-designed architecture enables high performance while maintaining simplicity and flexibility that are critical for embedded applications. It can be interfaced to CISC or RISC microprocessors, microcontrollers, or digital signal processors (DSPs) and is ideal for providing USB host functions to a wide range of applications including mobile devices, cell phones, PDAs, point-of-sale systems, test equipment, set-top boxes, Internet appliances, as well as serving as an interface for USB to Bluetooth controllers.
The complete solutions offer the advantages of shortened time-to-market, simplified procurement and technical support from one source.

Features
* High performance USB host controller for embedded applications
* Supports USB Specification 2.0 compliant fullspeed (12Mb/s) and low-speed (1.5Mb/s) USB
devices
* Patent pending design
* Full USB bandwidth utilization with low load on system microprocessor
* Standard 8-bit microprocessor bus interface
* 2 Kbyte data memory
* Supports all four types of USB transfers (control, bulk, interrupt, and isochronous with maximum packet size of 1,023 bytes)
* Supports batch processing of up to 16 USB
transactions without interrupting the MCU
* Supports scheduling of transaction batches that may “spill” over the USB frame boundaries for
easy programming
* Supports “in-place” processing in the data memory
– used for applications requiring peer-to-peer data transfer between USB devices
* Supports double buffering for all USB transfers
* Hardware generated Start of Frame (SOF)
* Fully qualified, market proven root hub with four ports and integrated analog transceivers.
* Individually controlled power-on and over-current circuit for each of the four downstream ports
* Power management with host suspend, remote wakeup, and power saving modes
* 6 MHz crystal/oscillator to reduce cost and EMI
* Evaulation/development kit available including C source code of the programming interface library and an interactive USB host controller Exerciser
* Embedded RTOS software available for popular microprocessors, RISC, CISC, and DSP’s using WinCE, Linux, VxWorks, Nucleus, Lynx, QNX, pSOS, PowerTV, SMX, ThreadX, VRTX, ITRON, Symbian and MS-DOS operating systems with more in development
* Supports OHCI/UHCI compliant USB host stack
* USB device driver software available including printers, speakers, mass storage, hub, modems, Ethernet, mouse, keyboard, digital camera, video camera, cell phone, STB and PDA with more in development
* Industrial grade devices standard. Military and automotive grade devices available
* Single 3.3V power supply
* 64 pin LQFP package

Trackback :: http://datasheetblog.com/trackback/1301

댓글을 달아 주세요 Comment

General Description
The AME8821 family of positive, linear regulators feature low quiescent current (17mA typ.) with low dropout voltage, making them ideal for battery applications. The space-saving SOT-25/TSOT-25 packages are attractive for “Pocket” and “Hand Held”applications.
These rugged devices have both Thermal Shutdown, and Current Limitation to prevent device failure under the “Worst” operating conditions. In application requires a low noise regulated supply. The AME8821 family uses the SR pin to program the output voltage’s slew rate to
control the in-rush current. This is specifically used in the USB application where large load capacitance is present at start-up.
The AME8821 also features a logic-enabled sleep mode to shutdown the regulator, reducing quiescent current to 1mA typical at TA= 25oC.
The AME8821 is stable with an output capacitance of 4.7mF or larger.

Features
* Guaranteed 250mA Output
* 17mA Quiescent Current
* Over-Temperature Shutdown
* Over-Current Limitation
* Noise Reduction SR Capacitor
* Power-Saving Shutdown Mode
* Space-Saving SOT-25/TSOT-25 Packages
* Factory Pre-set Output Voltages
* Enable pin option
* ENB active low enable
* EN active high enable
* All AME's Lead Free Products Meet RoHS Standards

Applications
* Instrumentation
* Portable Electronics
* Wireless Devices
* Cordless Phones
* PC Peripherals
* Battery Powered Widgets

AME8821AEEV

Trackback :: http://datasheetblog.com/trackback/1269

댓글을 달아 주세요 Comment

Features
• 4 channels of ESD Protection
• 8kV ESD protection (IEC 61000-4-2, contact discharge)
• 16kV ESD protection (HBM)
• SOT-563
• TDFN-8, 1.70mm x 1.35mm, 0.4mm pitch
• TDFN-8, 2mm x 2mm, 0.5mm pitch
• Lead free
• 16V clamp on Vcc

Applications
• USB and Mini-USB applications
• I/O port protection for mobile handsets
• Wireless handsets

Product Description
California Micro Devices’ CM1240 is a four channel ESD protection array. Three channels of the CM1240 are low voltage (LV) diodes, which have a capacitance of 7pF enabling them to protect high speed I/O ports while providing robust ESD protection. The other channel of the CM1240 is a high voltage (HV) diode which has a capacitance of 25pF enabling it to protect
power supply inputs or OLED power rails, etc.
The parts integrate avalanche-type ESD diodes, which provide a very high level of protection for sensitive electronic components that may be subjected to electrostatic discharge (ESD). The ESD protection diodes are designed and characterized to safely dissipate ESD strikes of 8kV, the maximum requirement of the IEC61000-4-2 international standard. Using the MIL-STD-883 (Method 3015) specification for Human Body Model (HBM) ESD, the pins are protected for contact discharges of greater than 16kV.
This device is particularly well suited for portable electronics (e.g. wireless handsets, PDAs, notebook computers) because of its small package format and easy-to-use pin assignments. In particular, the CM1240 is ideal for protecting USB or mini USB ports operating at full speed (12Mbps).
The CM1240 is available in a space saving, low profile, lead-free TDFN-8 or SOT-563 package.

CM1240-F4SE
CM1240-04DE
CM1240-04D4
TAG dual, ESD, port, USB

Trackback :: http://datasheetblog.com/trackback/1169

댓글을 달아 주세요 Comment

Features
* Compliant with USB Specification v1.1, and USB 2.0 full speed
* Embedded high efficiency, high performance class D stereo amplifier
* Support I2S input and I2S output interface of master mode Sampling frequencies(Fs):48kHz
* +6dB enhancement(Theater function)
* Support both bus-powered and self-powered operation
* Supports Win Me//2000/XP and MacOS
* True plug-and-play application, no driver is required for basic USB speaker application
* Support volume/mute control with external button
* Built-in 5V to 3.3V regulator for internal device operation
* Total efficiency 80% for 8Ω load @ -1dB 1kHz sine wave input
* Loudspeaker PSNR & DR (A-weighting) 80dB (PSNR), 78dB (DR) with Bead filter 82dB (PSNR), 78dB (DR) with Chock filter
* Anti-pop design
* Over-temperature protection
* Under-voltage shutdown
* Short-circuit detection
* 12 MHz Crystal Input
* 32-pin LQFP(Pb free)

Description
AD62550A is a single chip of Class-D audio amplifier with USB/I2S interface. When using the power supplied from the USB port, AD62550A can drive a pair of up to 1W speakers due to the built-in, high efficiency and high performance class D amplifiers. The device also has an I2S input port and I2S output port. The I2S input port allows other external audio sources to use the class D amplifier to share the speakers. The I2S output port allows other high performance audio device (i.e. AD8356A/AD8256A) to be controlled by AD62550A.

Trackback :: http://datasheetblog.com/trackback/1033

댓글을 달아 주세요 Comment

FEATURES
USB 2.0 (480 Mbps) and USB 1.1 (12 Mbps) signal switching compliant Tiny 10-lead 1.6 mm × 1.3 mm mini LFCSP package and 12-lead 3 mm × 3 mm LFCSP package 2.7 V to 3.6 V single-supply operation Typical power consumption: <0.1 μW RoHS compliant

APPLICATIONS
USB 2.0 signal switching circuits
Cellular phones
PDAs
MP3 players
Battery-powered systems
Headphone switching
Audio and video signal routing
Communications systems

GENERAL DESCRIPTION
The ADG772 is a low voltage, CMOS device that contains two independently selectable single-pole, double throw (SPDT) switches. It is designed as a general-purpose switch and can be used for routing both USB 1.1 and USB 2.0 signals.
This device offers a data rate of 1260 Mbps, making the part suitable for high frequency data switching. Each switch conducts equally well in both directions when on and has an input signal range that extends to the supplies. The ADG772 exhibits break-before-make switching action.
The ADG772 comes in a 12-lead LFCSP, and a 10-lead mini LFCSP. These packages make the ADG772 the ideal solution for space-constrained applications.

PRODUCT HIGHLIGHTS
1. 1.6 mm × 1.3 mm mini LFCSP package.
2. USB 1.1 (12 Mbps) and USB 2.0 (480 Mbps) compliant.
3. Single 2.7 V to 3.6 V operation.
4. RoHS compliant.
TAG CMOS, dual, USB

Trackback :: http://datasheetblog.com/trackback/988

댓글을 달아 주세요 Comment

PRODUCT FEATURES

General Description
 The SMSC 4-Port Hub is low power, OEM configurable, MTT (multi transaction translator) hub controller IC with 4 downstream ports for embedded USB solutions. The 4-port hub is fully compliant with the USB 2.0 Specification and will attach to an upstream port as Full-Speed Hub or as a Full-/High-Speed Hub.
 The 4- Port Hub supports Low-Speed, Full- Speed, and High- Speed (if operating as a High-Speed Hub) downstream devices on all of the enabled downstream ports.

General Features
* Hub Controller IC with 4 downstream ports
* High-performance multiple transaction translator. MultiTRAK™ Technology Provides one transaction translator per port
* Enhanced OEM configuration options available through either a single serial i2C EEPROM, or
SMBus Slave Port
* 36-pin (6x6mm) and 48-Pin (7x7mm) QFN lead-free, RoHS compliant packages
* Footprint compatible with USB2513 and USB2512 (36-pin QFN) to provide designers with flexibility regarding the quantity of USB expansion ports utilized without redesign

Hardware Features
* Low power operation
* Full Power Management with individual or ganged power control of each downstream port
* On-chip Power On Reset (POR)
* Internal 1.8V Voltage Regulator
* Fully integrated USB termination and Pull-up/Pulldown resistors
* On Board 24MHz Crystal Driver or External 24/48MHz clock input
* USB host/device speed indicator. Per-port 3-color LED drivers that indicate the speed of USB host and device connection - hi-speed (480 Mbps), full-speed (12 Mbps), low-speed (1.5 Mbps) (48-pin QFN)
* Enhanced EMI rejection and ESD protection performance

OEM Selectable Features
* Customize Vendor ID, Product ID, and Device ID
* Select whether the hub is part of a compound device (When any downstream port is permanently hardwired to a USB peripheral device, the hub is part of a compound device)
* Flexible port mapping and disable sequence. Ports can be disabled/reordered in any order to support multiple product SKUs. Hub will automatically reorder the remaining ports to match the Host controller's numbering scheme
* Programmable USB differential-pair pin location
* Ease PCB layout by aligning USB signal lines directly to connectors
* Programmable USB signal drive strength. Recover USB signal integrity due to compromised system environment using 4-level driving strength resolution
* Select the presence of a permanently hardwired USB peripheral device on a port by port basis
* Configure the delay time for filtering the over-current sense inputs
* Configure the delay time for turning on downstream port power
* Configure the polarity of downstream port power control signals
* Indicate the maximum current that the 4-port hub consumes from the USB upstream port
* Indicate the maximum current required for the hub controller
* Supports Custom String Descriptor up to 31 characters in length for:
– Product String
– Manufacturer String
– Serial Number String
* Pin Selectable Options for Default Configuration
— Select Downstream Ports as Non-Removable Ports
— Select Downstream Ports as Disabled Ports
— Select Downstream Port Power Control and Over-
Current Detection on a Ganged or Individual Basis
— Select Downstream Port Power Control Polarity
— Select USB Signal Drive Strength
— Select USB Differential Pair Pin location
— Select on-chip or off-chip voltage regulator mode

Applications
* LCD monitors and TVs
* Multi-function USB peripherals
* PC mother boards
* Set-top boxes, DVD players, DVR/PVR
* Printers and scanners
* PC media drive bay
* Portable hub boxes
* Mobile PC docking
* Embedded systems

USB2514-AEZG
USB2514-HZH

Trackback :: http://datasheetblog.com/trackback/735

댓글을 달아 주세요 Comment

Features
■ Complies with Universal Serial Bus Specification 2.0
■ Integrated 5V to 3.3V voltage regulator for powering VBus
■ Utilizes digital inputs and outputs to transmit and receive USB cable data
■ Supports full speed (12Mbits/s) data rates
■ Ideal for portable electronic devices
■ MLP technology package (16 terminal) with HBCC footprint
■ 15kV contact HBM ESD protection on bus terminals
■ Supports disable mode and is functionally equivalent to Philips ISP1102

Description
 This chip provides a USB Transceiver functionality with a voltage regulator that is compliant to USB Specification Rev 2.0. this integrated 5V to 3.3V regulator allows interfacing of USB Application specific devices with supply voltages ranging from 1.65V to 3.6V with the physical
layer of Universal Serial Bus. It is capable of operating at 12Mbits/s (full speed) data rates and hence is fully compliant to USB Specification Rev 2.0. The Vbusmon terminal allows for monitoring the Vbus line.
 The USB1T1103 also provides exceptional ESD protection with 15kV contact HBM on D+,D- terminals

Applications
■ PDA
■ PC Peripherals
■ Cellular Phones
■ MP3 Players
■ Digital Still Camera
■ Information Appliance

USB1T1103MPX
USB1T1103MHX

Trackback :: http://datasheetblog.com/trackback/722

댓글을 달아 주세요 Comment

Features
• High Performance, Low Power AVR® 8-Bit Microcontroller
• Advanced RISC Architecture
– 135 Powerful Instructions – Most Single Clock Cycle Execution
– 32 x 8 General Purpose Working Registers
– Fully Static Operation
– Up to 16 MIPS Throughput at 16 MHz
– On-Chip 2-cycle Multiplier
• Non-volatile Program and Data Memories
– 64/128K Bytes of In-System Self-Programmable Flash
• Endurance: 100,000 Write/Erase Cycles
– Optional Boot Code Section with Independent Lock Bits
• In-System Programming by On-chip Boot Program hardware activated after reset
• True Read-While-Write Operation
– 2K/4K (64K/128K Flash version) Bytes EEPROM
• Endurance: 100,000 Write/Erase Cycles
– 4K/8K (64K/128K Flash version) Bytes Internal SRAM
– Up to 64K Bytes Optional External Memory Space
– Programming Lock for Software Security
• JTAG (IEEE std. 1149.1 compliant) Interface
– Boundary-scan Capabilities According to the JTAG Standard
– Extensive On-chip Debug Support
– Programming of Flash, EEPROM, Fuses, and Lock Bits through the JTAG Interface
• USB 2.0 Full-speed/Low-speed Device and On-The-Go Module
– Complies fully with:
– Universal Serial Bus Specification REV 2.0
– On-The-Go Supplement to the USB 2.0 Specification Rev 1.0
– Supports data transfer rates up to 12 Mbit/s and 1.5 Mbit/s
• USB Full-speed/Low Speed Device Module with Interrupt on Transfer Completion
– Endpoint 0 for Control Transfers : up to 64-bytes
– 6 Programmable Endpoints with IN or Out Directions and with Bulk, Interrupt or Isochronous Transfers
– Configurable Endpoints size up to 256 bytes in double bank mode
– Fully independant 832 bytes USB DPRAM for endpoint memory allocation
– Suspend/Resume Interrupts
– Power-on Reset and USB Bus Reset
– 48 MHz PLL for Full-speed Bus Operation
– USB Bus Disconnection on Microcontroller Request
• USB OTG:
– Supports Host Negotiation Protocol (HNP) and Session Request Protocol (SRP) for OTG dual-role devices
– Provide Status and control signals for software implementation of HNP and SRP
– Provides programmable times required for HNP and SRP
• Peripheral Features
– Two 8-bit Timer/Counters with Separate Prescaler and Compare Mode
– Two16-bit Timer/Counter with Separate Prescaler, Compare- and Capture Mode
– Real Time Counter with Separate Oscillator
– Two 8-bit PWM Channels
– Six PWM Channels with Programmable Resolution from 2 to 16 Bits
– Output Compare Modulator
– 8-channels, 10-bit ADC
– Programmable Serial USART
– Master/Slave SPI Serial Interface
– Byte Oriented 2-wire Serial Interface
– Programmable Watchdog Timer with Separate On-chip Oscillator
– On-chip Analog Comparator
– Interrupt and Wake-up on Pin Change
Special Microcontroller Features
– Power-on Reset and Programmable Brown-out Detection
– Internal Calibrated Oscillator
– External and Internal Interrupt Sources
– Six Sleep Modes: Idle, ADC Noise Reduction, Power-save, Power-down, Standby, and Extended Standby I/O and Packages
– 48 Programmable I/O Lines
– 64-lead TQFP and 64-lead QFN
Operating Voltages
– 2.7 - 5.5V
– 2.2 - 5.5V (Check availabilty)
Operating temperature
– Industrial (-40°C to +85°C)
Maximum Frequency
– 8 MHz at 2.7V - Industrial range
– 16 MHz at 4.5V - Industrial range

Disclaimer
Typical values contained in this datasheet are based on simulations and characterization of
other AVR microcontrollers manufactured on the same process technology. Min and Max values will be available after the device is characterized.

Overview
The AT90USB64/128 is a low-power CMOS 8-bit microcontroller based on the AVR enhanced
RISC architecture. By executing powerful instructions in a single clock cycle, the  AT90USB64/128 achieves throughputs approaching 1 MIPS per MHz allowing the system designer to optimize power consumption versus processing speed.

AT90USB647 AT90USB1286 AT90USB1287

Trackback :: http://datasheetblog.com/trackback/584

댓글을 달아 주세요 Comment

Description
AU6388 is a single chip USB 2.0 flash disk controller that supports dual channel mode for high performance operation. The AU6388 it can be used as a removable storage disk in enormous data exchange application between USB enabled PC and NAND type flash memory, it can also be configured as bootable disk for system recovery.
Alcor Micro provides iRun smart application as a handy tool to manage partition and password for USB storage device.

Features
* Support dual channel mode for high-speed transfer
* Support USB v2.0 specification and USB Device Class Definition for Mass Storage, Bulk-Transport v1.0
* Work with default driver from Windows ME, Windows 2000, Windows XP, Mac 9.2, Mac OS X and vendor driver from Alcor for Windows 98SE
* Multiple FIFO implementation for concurrent bus operation
* Runs at 12MHz, built-in 480 MHz PLL
* LED for bus activity monitoring
* Built-in 3.3V to 2.5V regulator
* Integrate flash memory power control switch
* Support bad block management
* Support dynamic serial number via mass production software
* Support hardware and software write protection
* Support AutoRun feature
    - AutoRun feature on Windows ME, Windows 2000, Windows XP, Win98.
* Support smart application – iRun handy tool
    -  Support password protection for access security
    - Support partition and lock disk function
    - Support software write protection function
* 48-pin package available

Trackback :: http://datasheetblog.com/trackback/571

댓글을 달아 주세요 Comment

Features
·  Conforms to USB 12Mbps Specification, Version 1.1
·  Patented architecture
·  Single chip solution for host-to-host communication
·  File transfer application software running on Windows 98 and Windows 2000
·  Up to 8.6Mbps transfer rate
·  Suitable for mobile and SOHO environment
·  Tiniest solution in the market – 16-pin SOP
·  On-chip 3.3V output
·  12MHz external clock
·  Internal power-on reset
·  Power management support

Functional Overview
The GL620USB provides a single-chip solution for connecting two or more PCs via their USB ports. According to USB protocol, the PC is the host and the device is a slave, where the host initiates all the USB traffic and the slave responds to the host’s requests. In other words, a host cannot talk to another host via USB protocol; instead, a host can only talk to one or more devices. The GL620USB’s patent-pending architecture overcomes the USB inherently incompatibility of connecting two or more PCs by providing two independent USB transceivers and SIEs for each host, i.e., data can be transferred in both directions simultaneously.

Trackback :: http://datasheetblog.com/trackback/203

댓글을 달아 주세요 Comment