• 32,768 channel x 32,768 channel non-blocking digital Time Division Multiplex (TDM) switch at
65.536 Mbps, 32.768 Mbps and 16.384 Mbps or using a combination of rates
• 16,384 channel x 16,384 channel non-blocking digital TDM switch at 8.192 Mbps
• High jitter tolerance with multiple input clock sources and frequencies
• Up to 128 serial TDM input streams, divided into 32 groups with 4 input streams per group
• Up to 128 serial TDM output streams, divided into 32 groups with 4 output streams per group
• Per-group input and output data rate conversion selection at 65.536 Mbps, 32.768 Mbps,
16.384 Mbps and 8.192 Mbps. Input and output data group rates can differ
• Per-group input bit delay for flexible sampling point selection
• Per-group output fractional bit advancement
• Four sets of output timing signals for interfacing additional devices
• Per-channel A-Law/µ-Law Translation
• Per-channel constant or variable throughput delay for frame integrity and low latency applications
• Per-stream Bit Error Rate (BER) test circuits
• Per-channel high impedance output control
• Per-channel force high output control
• Per-channel message mode
• Control interface compatible with Intel and Motorola Selectable 32 bit and 16 bit nonmultiplexed buses
• Connection Memory block programming
• Supports ST-BUS and GCI-Bus standards for input and output timing
• IEEE 1149.1 (JTAG) test port
• 3.3 V I/O with 5 V tolerant inputs; 1.8 V core voltage

• Large Switching Platforms
• Central Office Switches
• Wireless Base Stations
• Multi-service Access Platforms
• Media Gateways

The ZL50073 is a non-blocking Time Division Multiplex (TDM) switch with maximum 32,768 x 32,768 channels. The device can switch 64 kbps and Nx64 kbps TDM channels from any input stream to any output stream. With a number of enhanced features, the ZL50073 is designed for high capacity voice and data switching applications.

 The ZL50073 has 128 input and 128 output data streams which can operate at 8.192 Mbps, 16.384 Mbps, 32.768 Mbps or 65.536 Mbps. The large number of inputs and outputs maintains full 32 K x 32 K channel switching capacity at bit rates of 65 Mbps, 32 Mbps and 16 Mbps. Up to 32 input and output data streams may operate at 65 Mbps. Up to 64 input and output data streams may operate at 32 Mbps. Up to 128 input and output data streams may operate at 16 Mbps or 8 Mbps. The data rate can be independently set in groups of 4 input or output streams.
In this way it is possible to provide rate conversion from input data channel to output data channel.

 The ZL50073 uses a master clock (CKi0) and frame pulse (FPi0) to define the TDM data stream frame boundary and timing. A high speed system clock is derived internally from CKi0 and FPi0. The input and output data streams can independently reference their timings to one of the input clocks or to the internal system clock. The ZL50073 has a variety of user configurable options designed to provide flexibility when data streams are connected to multiple TDM components or circuits.
 These include:
• Two additional programmable reference inputs, CKi2 - 1 and FPi2 - 1, which can be used to provide alternative sources for input and output stream timing
• Variable input bit delay and output advancement, to accommodate delays and frame offsets of streams connected through different data paths
• Four timing outputs, CKo3 - 0 and FPo3 - 0, which can be configured independently to provide a variety of clock and frame pulse options
• Support of both ST-BUS and GCI-Bus formats

The ZL50073 also has a number of value added features for voice and data applications:
• Per-channel variable delay mode for low latency applications and constant delay mode for frame integrity applications
• Per-channel A-Law/µ-Law Conversions for both voice and data
• 128 separate Pseudo-random Bit Sequence (PRBS) test circuits; one per stream. This provides an integrated Bit Error Rate (BER) test capability to facilitate data path integrity checking

 The ZL50073 has two major modes of operation: Connection Mode (normal) and Message Mode. In Connection Mode, data bytes received at the TDM inputs are switched to timeslots in the output data streams, with mapping controlled by the Connection Memories. Using Zarlink's Message Mode capability, microprocessor data can be broadcast to the output data streams on a per-channel basis. This feature is useful for transferring control and status information to external circuits or other TDM devices.
A non-multiplexed microprocessor port provides access to the internal Data Memory, Connection Memory and Control Registers used to program ZL50073 options. The port is configurable to interface with either Motorola or Intel-type microprocessors and is selectable to be either 32 bit or 16 bit. The mandatory requirements of IEEE 1149.1 standard are supported via the dedicated Test Access Port.


Trackback :: http://datasheetblog.com/trackback/660

댓글을 달아 주세요 Comment