Description
The Powerline range of high power modules includes half bridge, chopper, dual, single and bi-directional switch configurations covering voltages from 1200V to 6500V and currents up to 2400A.
The DIM400DDM12-A000 is a dual switch 1200V, nchannel enhancement mode, insulated gate bipolar transistor (IGBT) module. The IGBT has a wide reverse bias safe operating area (RBSOA) plus 10us short circuit withstand. This device is optimised for traction drives and other applications requiring high thermal cycling capability.
The module incorporates an electrically isolated base plate and low inductance construction enabling circuit designers to optimise circuit layouts and utilise grounded heat sinks for safety.

FEATURES
*10μs Short Circuit Withstand
*Non Punch Through Silicon
*Lead Free construction
*Isolated MMC Base with AlN Substrates
*High Thermal Cycling Capability

APPLICATIONS
*High Reliability Inverters
*Motor Controllers
*Traction Drives

DESCRIPTION
The AIC1529 is a quad high-side power switch for self-powered and bus-powered Universal Serial Bus (USB) applications. Both high-side switches are MOSFET with 110mW RDS(ON), which meets USB voltage drop requirements for maximum transmission wire length.
Multi-purpose open-drain fault flag output indicates over-current limiting, thermal shutdown, or undervoltage lockout for each channel. Output current is typically limited to 1.3A, and the thermal shutdown functions of the power switches independently control their channel under overcurrent condition.
Guaranteed minimum output rise time limits inrush current during hot plug-in as well as minimizing EMI and prevents the voltage at upstream port from dropping excessively.

FEATURES
*110mW (5V Input) High-Side MOSFET Switch.
*500mA Continuous Load Current per Channel.
*220μA Typical On-State Supply Current.
*1μA Typical Off-State Supply Current.
*Current-Limit / Short Circuit Protection.
*Thermal Shutdown Protection under Overcurrent Condition.
*Undervoltage Lockout Ensures that Switch is off at Start Up.
*Output can be Forced Higher than Input (Off-State).
*Open-Drain Fault Flag.
*Slow Turn ON and Fast Turn OFF.
*Enable Active-High or Active-Low.

APPLICATIONS
*USB Power Management.
*Hot Plug-In Power Supplies.
*Battery-Charger Circuit.

AIC1529-0CNTR, AIC1529-1CNTR, AIC1529-0PNTR, AIC1529-1PNTR

Description
The PI3V341 is a true bi-directional 3-Port 4:1 multiplexer/demultiplexer with Hi-Z outputs that is recommended for both RGB and composite video switching applications. With the increased 4:1 channels, multiple components, such as VCR, DVD, PC1, PC2 and etc. can be put on the video networks. The VideoSwitch can be driven from a current output RAMDAC or voltage output composite video source.
Low On-Resistance, Low Crosstalk, Low OFF Isolation and wide bandwidth features make it ideal for video and other applications. Industry leading advantages include a near zero propagation delay, resulting from its low channel resistance and I/O capacitance. The switch is bi-directional and offers little or no attenuation of the high-speed signals at the outputs. The device also has exceptional high current capability which is far greater than most analog switches offered today. The PI3V341 offers a high-performance (375 MHz), low-cost solution to switch between video sources.
The PI3V341/-A is an enhanced solution w/ enhanced ESD protection support, up to 8kV contact.

Features
*Near-Zero propagation delay
*5Ω switches connect inputs to outputs
*High signal passing bandwidth (375MHz)
*Beyond Rail-to-Rail switching
*5V I/O tolerant with 3.3V supply
*2.5V and 3.3V supply voltage operation
*Hot insertion capable (non '-A' part only)
*Low Crosstalk (XTALK = -60dB Typ.)
*Low Off-Isolation (OIRR = -60db Typ.)
*Industrial operating temperature: -40ºC to +85ºC
*ESD Protection
-PI3V341: I/O pins only have 3kV contact protection
-PI3V341-A: I/O pins only have 8kV contact protection
*Latch-up performance >250mA per JESD17
*Packaging (Pb-free & greeen available)
-24-Pin QSOP (Q)
-24-Pin TSSOP (L)

Applications
*Projection TV and LCD TV
*Video consumer applications
*Analog video signal processing

PI3V341QE, PI3V341LE, PI3V341-AQE, PI3V341-ALE

General Description
N channel vertical power FET with charge pump, current controlled input and diagnostic feedback with load current sense, integrated in Smart SIPMOSâ chip on chip technology. Fully protected by embedded protection functions.

Features
*Overload protection
*Current limitation
*Short circuit protection
*Overtemperature protection
*Overvoltage protection (including load dump)
*Clamp of negative voltage at output
*Fast deenergizing of inductive loads
*Low ohmic inverse current operation
*Reverse battery protection
*Diagnostic feedback with load current sense
*Open load detection via current sense
*Loss of Vbb protection
*Electrostatic discharge (ESD) protection

Application
*Power switch with current sense diagnostic feedback for up to 48V DC grounded loads
*Most suitable for loads with high inrush current  like lamps and motors; all types of resistive and inductive loads
*Replaces electromechanical relays, fuses and discrete circuits

Q67060-S6953A3

DESCRIPTION
NEC's UPG2015TB is a single control single control GaAs MMIC L, S-band SPDT (Single Pole Double Throw) switch for mobile phone and L, S-band applications.
This device can operate frequency from 0.5 to 2.5 GHz, with low insertion loss and high isolation.
This device is housed in a 6-pin super minimold package, suitable for high-density surface mounting.

FEATURES
*SUPPLY VOLTAGE:
-VDD = 2.7 to 3.0 V (2.8 V TYP.)
*SINGLE SWITCH CONTROL VOLTAGE:
-Vcont (H) = 2.7 to 3.0 V (2.8 V TYP.)
-Vcont (L) = −0.2 to +0.2 V (0 V TYP.)
*LOW INSERTION LOSS:
-LINS1 = 0.25 dB TYP. @ f = 0.5 to 1.0 GHz, VDD = 2.8 V, Vcont = 2.8 V/0 V
-LINS2 = 0.30 dB TYP. @ f = 1.0 to 2.0 GHz,VDD = 2.8 V, Vcont = 2.8 V/0 V
-LINS3 = 0.35 dB TYP. @ f = 2.5 GHz,VDD = 2.8 V, Vcont = 2.8 V/0 V
*HIGH ISOLATION:
-ISL1 = 27 dB TYP. @ f = 0.5 to 2.0 GHz, VDD = 2.8 V, Vcont = 2.8 V/0 V
-ISL2 = 24 dB TYP. @ f =2.5 GHz, VDD = 2.8 V, Vcont = 2.8 V/0 V
*POWER HANDLING:
-Pin (0.1 dB) = +27.0 dBm TYP. @ f = 2.5 GHz, VDD = 2.8 V, Vcont = 2.8 V/0 V
*HIGH-DENSITY SURFACE MOUNTING:
-6-pin super minimold package (2.0 × 1.25 × 0.9 mm)

APPLICATIONS
*L, S-band digital cellular or cordless handsets
*PCS, W-LAN, WLL and BluetoothTM
*Short Range Wireless

UPG2015TB-E3-A

Description
The FSDM0465RS is an integrated Pulse-Width Modulator (PWM) and SenseFET specifically designed for high-performance offline Switch Mode Power Supplies (SMPS) with minimal external components. The device is an integrated, high-voltage, powerswitching regulator that combines an avalanche rugged SenseFET with a current mode PWM control block. The PWM controller includes integrated fixed-frequency oscillator, under-voltage lockout, leading-edge blanking (LEB), optimized gate driver, internal soft-start, temperature-compensated precise-current sources for a loop compensation and self-protection circuitry. Compared with a discrete MOSFET and PWM controller solution, it reduces total cost, component count, size and weight; while increasing efficiency, productivity and system reliability. This device is a basic platform well suited for cost effective designs of flyback converters.

Features
*Internal Avalanche Rugged SenseFET
*Advanced Burst-Mode Operation Consumes under 1W at 240VAC and 0.5W Load
*Precision Fixed Operating Frequency: 66kHz
*Internal Startup Circuit
*Improved Pulse-by-Pulse Current Limiting
*Over-Voltage Protection (OVP)
*Overload Protection (OLP)
*Internal Thermal Shutdown Function (TSD)
*Abnormal Over-Current Protection (AOCP)
*Auto-Restart Mode
*Under-Voltage Lock Out (UVLO) with Hysteresis
*Low Operating Current: 2.5mA
*Built-in Soft-Start

Applications
*SMPS for LCD Monitor and STB
*Adaptor

FSDM0465RSWDTU

DESCRIPTION
The Powerline range of high power modules includes half bridge, chopper, dual, single and bi-directional switch configurations covering voltages from 600V to 3300V and currents up to 3600A.
The DIM600BSS12-E000 is a single switch 1200V, n channel enhancement mode, insulated gate bipolar transistor (IGBT) module. The IGBT has a wide reverse bias safe operating area (RBSOA) plus full 10μs short circuit withstand.
The module incorporates an electrically isolated base plate and low inductance construction enabling circuit designers to optimise circuit layouts and utilise grounded heat sinks for safety.

FEATURES
*Trench Gate Field Stop Technology
*Low Conduction Losses
*Low Switching Losses
*10μs Short Circuit Withstand

APPLICATIONS
*Motor Drives
*Wind Turbines
*UPS Systems

Description
The S-8130AA is a temperature switch with a latch function having a built-in semiconductor temperature sensor with the accuracy of ±2.5°C. The output signal is inverted when the temperature is detected, and latched until a reset signal input or a detection of the power voltage lowering.
Low voltage operation down to 2.2 V is possible and the current consumption is low, 15 μA (typ.), due to CMOS configuration.
The S-8130AA consists of a temperature sensor having the temperature coefficient of −13 mV/°C, a reference voltage source, a comparator, voltage detection circuit, and noise suppression circuit all of which are enclosed in 8-Pin MSOP package.
Since the temperature range of this IC is −40 to +100 °C, it is possible to achieve the extensive application for temperature control.

Features
*Detection temperature : +60 to +95°C, 5°C step
*Detection accuracy : ±2.5°C
*VSS grounded temperature voltage output
*Low voltage operation : VDD (min.)=2.2 V
*Low current consumption : 15 μA typ. (+25°C)
*Output logic level is fixed by the latch after temperature detection
*Noise suppression at temperature detection
*Package : 8-Pin MSOP
*Lead-free products

Applications
*Game console
*Electronic devices

S-8130AAAFN-MAAT2G, S-8130AACFN-MAET2G

DESCRIPTION
NEC's UPG2010TB is a single control GaAs MMIC L-band SPDT (Single Pole Double Throw) switch for mobile phone and L-band applications.
This device can operate from 0.5 to 2.5 GHz, with low insertion loss and high isolation.
This device is housed in a 6-pin super minimold package, suitable for high-density surface mounting.

FEATURES
*SUPPLY VOLTAGE:
-VDD = 2.7 to 3.0 V (2.8 V TYP.)
*SWITCH CONTROL VOLTAGE:
-Vcont (H) = 2.7 to 3.0 V (2.8 V TYP.)
-Vcont (L) = −0.2 to +0.2 V (0 V TYP.)
*LOW INSERTION LOSS:
-LINS1 = 0.25 dB TYP. @ f = 0.5 to 1.0 GHz, VDD = 2.8 V, Vcont = 2.8 V/0 V
-LINS2 = 0.30 dB TYP. @ f = 2.0 GHz, VDD = 2.8 V, Vcont = 2.8 V/0 V
-LINS3 = 0.35 dB TYP. @ f = 2.5 GHz, VDD = 2.8 V, Vcont = 2.8 V/0 V(Reference value)
*HIGH ISOLATION:
-ISL1 = = 28 dB TYP. @ f = 0.5 to 2.0 GHz, VDD = 2.8 V, Vcont = 2.8 V/0 V
-ISL2 = 25 dB TYP. @ f = 2.5 GHz, VDD = 2.8 V, Vcont = 2.8 V/0 V(Reference value)
*POWER HANDLING:
-Pin (0.1 dB) = +33.0 dBm TYP. @ f = 1.0 GHz, VDD = 2.8 V, Vcont = 2.8 V/0 V
*HIGH-DENSITY SURFACE MOUNTING:
-6-pin super minimold package (2.0 × 1.25 × 0.9 mm)

APPLICATIONS
*L-band digital cellular or cordless handsets
*PCS, W-LAN, WLL and BluetoothTM
*Short Range Wireless

UPG2010TB-E3-A

DESCRIPTION
The AIC1527 is a quad high-side power switch for self-powered and bus-powered Universal Serial Bus (USB) applications. One high-side switch is a MOSFET with 110mW RDS(ON), which meets USB voltage drop requirements for maximum transmission wire length.
Multi-purpose open-drain fault flag output indicates over-current limiting, thermal shutdown, or undervoltage lockout for each channel. Output current is typically limited to 1A, well below the 5A safety requirement, and the thermal shutdown function independently controls each channel
under overcurrent condition.
Guaranteed minimum output rise time limits inrush current during hot plug-in, minimizing EMI
and preventing the voltage at upstream port from dropping excessively.

FEATURES
*110mW (5V Input) High-Side MOSFET Switch.
*500mA Continuous Load Current per Channel.
*220mA Typical On-State Supply Current.
*1mA Typical Off-State Supply Current.
*Current-Limit / Short Circuit Protection.
*Thermal Shutdown Protection under Overcurrent Condition.
*Undervoltage Lockout Ensures that Switch is off at Start Up.
*Output can be Forced Higher than Input (Off-State).
*Open-Drain Fault Flag.
*Slow Turn ON and Fast Turn OFF.
*Enable Active-High or Active-Low.

APPLICATIONS
*USB Power Management.
*Hot Plug-In Power Supplies.
*Battery-Charger Circuit.

AIC1527-0CN, AIC1527-1CN, AIC1527-0CS, AIC1527-1CS