FEATURES
*600W surge capability at 1ms
*Excellent clamping capability
*Low inductance
*Response Time Typically < 1ns
*Typical IR less then 1mA above 10V

MECHANICAL DATA
*Case : SMB Molded plastic
*Epoxy : UL94V-O rate flame retardant
*Lead : Lead Formed for Surface Mount
*Polarity : Color band denotes cathode end
*Mounting position : Any
*Weight : 0.108 gram

SMBJ5.0, SMBJ5.0A, SMBJ6.0, SMBJ6.0A, SMBJ6.5, SMBJ6.5A, SMBJ7.0

Trackback :: http://datasheetblog.com/trackback/2699

댓글을 달아 주세요 Comment

Description
The MLN SurgeArray™ Suppressor is designed to help protect components from transient voltages that exist at the circuit board level. This device provides four independent suppressors in a single leadless chip in order to reduce part count and placement time as well as save space on printed circuit boards.
SurgeArray™ devices are intended to suppress ESD, EFT and other transients in order to protect integrated circuits or other sensitive components operating at any voltage up to 18VDC. SurgeArray devices are rated to the IEC 61000-4-2 human body model ESD to help products attain EMC compliance. The array offers excellent isolation and low crosstalk between sections.
The inherent capacitance of the SurgeArray Suppressor permits it to function as a filter/suppressor, thereby replacing separate zener/capacitor combinations.
The MLN array is manufactured using the Littelfuse Multilayer technology process and is similar to the Littelfuse ML and MLE Series of discrete leadless chips.
The MLN can also be provided in a Dual version. Contact Littelfuse for information.

Features
*RoHS Compliant
*Four Individual Devices in One Chip
*ESD Rated to IEC 61000-4-2 (Level 4)
*AC Characterized for Impedance and Capacitance
*Low Adjacent Channel Crosstalk, -55dB at 10MHz (Typ)
*Low Leakage
*Operating Voltage up to 18VM(DC)
*-55oC to 125oC Operating Temperature Range
*Low-Profile, PCMCIA Compatible

Applications
*Data, Diagnostic I/O Ports
*Analog Signal/Sensor Lines
*Portable/Hand-Held Products
*Mobile Communications/Cellular Phones
*Computer/DSP Products
*Industrial Instruments Including Medical

V5.5MLN41206, V9MLN41206, V14MLN41206, V18MLN40805

Trackback :: http://datasheetblog.com/trackback/2272

댓글을 달아 주세요 Comment

DESCRIPTION
This surface mount Transient Voltage Suppressor (TVS) product family includes a rectifier diode element in series and opposite direction to achieve low capacitance below 100 pF. They are also available as RoHS Compliant with an e3 suffix. The low TVS capacitance may be used for protecting higher frequency applications in inductive switching environments or electrical systems involving secondary lightning effects per IEC61000-4-5 as well as RTCA/DO-160D or ARINC 429 for airborne avionics. They also protect from ESD and EFT per IEC61000-4-2 and IEC61000-4-4. If bipolar transient capability is required, two of these low capacitance TVS devices may be used in parallel and opposite directions (anti-parallel) for complete ac protection.

FEATURES
* Available in standoff voltage range of 6.5 to 200 V
* Low capacitance of 100 pF or less
* Molding compound flammability rating: UL94V-O
* Two different terminations available in C-bend (modified JBend with DO-214AB) or Gull-wing (DO-215AB)
* Options for screening in accordance with MIL-PRF-19500 for JAN, JANTX, JANTXV, and JANS are available by adding MQ, MX, MV, or MSP prefixes respectively to part numbers
* Optional 100% screening for avionics grade is available by adding MA prefix to part number for 100% temperature cycle –55ºC to 125ºC (10X) as well as surge (3X) and 24 hours HTRB with post test VBR & IR RoHS Compliant devices available by adding an “e3” suffix

APPLICATIONS / BENEFITS
* 1500 Watts of Peak Pulse Power at 10/1000 us
* Protection for aircraft fast data rate lines per select level waveforms in RTCA/DO-160D & ARINC 429
* Low capacitance for high speed data line interfaces IEC61000-4-2 ESD 15 kV (air), 8 kV (contact)
* IEC61000-4-5 (Lightning) as further detailed in LCE6.5 thru LCE170A data sheet
* T1/E1 Line Cards
* Base Stations
* WAN Interfaces
* XDSL Interfaces
* CSU/DSU Equipment

MAXIMUM RATINGS
* 1500 Watts of Peak Pulse Power dissipation at 25℃ with repetition rate of 0.01% or less*
* Clamping Factor: 1.4 @ Full Rated power
                           1.30 @ 50% Rated power
* tclamping (0 volts to V(BR) min): Less than 5x10⌒-9 seconds
* Operating and Storage temperatures: -65 to +150℃
* Steady State power dissipation: 5.0W @ TL = 50℃
* THERMAL RESISTANCE: 20oC/W (typical junction to
   lead (tab) at mounting plane
   * When pulse testing, do not pulse in opposite direction      
    (see “Schematic Applications” section herein and Figures 5 & 6
     for further protection in both  directions)

MECHANICAL AND PACKAGING
* CASE: Molded, surface mountable
* TERMINALS: Gull-wing or C-bend (modified Jbend) tin-lead or RoHS compliant annealed
matte-tin plating solderable per MIL-STD-750, method 2026
* POLARITY: Cathode indicated by band
* MARKING: Part number without prefix (e.g.
  LCE6.5A, LCE6.5Ae3, LCE33, LCE33Ae3, etc.
* TAPE & REEL option: Standard per EIA-481-B with 16 mm tape, 750 per 7 inch reel or 2500 per
 13 inch reel (add “TR” suffix to part number)

SMCGLCE6.5 SMCGLCE6.5A SMCGLCE7.0 SMCGLCE7.0A SMCGLCE7.5 SMCGLCE7.5A
SMCGLCE8.0 SMCGLCE8.0A SMCGLCE8.5 SMCGLCE8.5A SMCGLCE9.0 SMCGLCE9.0A

Trackback :: http://datasheetblog.com/trackback/520

댓글을 달아 주세요 Comment

FEATURES :
* 400W surge capability at 1ms
* Excellent clamping capability
* Low zener impedance
* Fast response time : typically less then 1.0 ps from 0 volt to VBR(min.)
* Typical IR less then 1mA above 10V
* Pb / RoHS Free

MECHANICAL DATA
* Case : SMA Molded plastic
* Epoxy : UL94V-O rate flame retardant
* Lead : Lead Formed for Surface Mount
* Polarity : Color band denotes cathode end except Bipolar.
* Mounting position : Any
* Weight : 0.064 grams

DEVICES FOR UNIPOLAR APPLICATIONS
* For Uni-directional altered the third letter of type from "B" to be "U".
* Electrical characteristics apply in both directions

STBB06I ~ STBB5G4

Trackback :: http://datasheetblog.com/trackback/89

댓글을 달아 주세요 Comment