General Description
The LM22670 series of regulators are monolithic integrated circuits which provide all of the active functions for a stepdown (buck) switching regulator capable of driving up to 3A loads with excellent line and load regulation characteristics. High efficiency (>90%) is obtained through the use of a low ON-resistance N-channel MOSFET. The series consists of a fixed 5V output and an adjustable version.
The SIMPLE SWITCHER® concept provides for an easy to use complete design using a minimum number of external components and National’s WEBENCH® design tool. National’s WEBENCH® tool includes features such as external component calculation, electrical simulation, thermal simulation, and Build-It boards for easy design-in. The switching clock frequency is provided by an internal fixed frequency oscillator which operates at 500 kHz. The switching frequency can also be adjusted with an external resistor or synchronized to an external clock up to 1MHz. It is also possible to selfsynchronize multiple regulators to share the same switching frequency. The LM22670 series also has built in thermal shutdown, current limiting and an enable control input that can power down the regulator to a low 25 μA quiescent current standby condition.

Features
*Wide input voltage range: 4.5V to 42V
*Internally compensated voltage mode control
*Stable with low ESR ceramic capacitors
*120 mΩ N-channel MOSFET TO-263 THIN package
*100 mΩ N-channel MOSFET PSOP-8 package
*Output voltage options:
-ADJ (outputs as low as 1.285V)
-5.0 (output fixed to 5V)
*±1.5% feedback reference accuracy
*Switching frequency of 500 kHz, adjustable between 200 kHz and 1 MHz
*-40°C to 125°C operating junction temperature range
*Precision enable pin
*Integrated boot diode
*Integrated soft-start
*Fully WEBENCH® enabled
*Step-down and inverting buck-boost applications

Applications
*Industrial Control
*Telecom and Datacom Systems
*Embedded Systems
*Automotive Telematics and Body Electronics
*Conversions from Standard 24V, 12V and 5V Input Rails

LM22670MR-ADJ, LM22670MRE-ADJ, LM22670MRX-ADJ, LM22670TJE-ADJ

Trackback :: http://datasheetblog.com/trackback/2738

댓글을 달아 주세요 Comment

General Description
The AOZ1020 evaluation board is a fully assembled and tested circuit board built with the AOZ1020 buck regulator IC. It outputs a preset or adjustable voltage at up to 2A of continuous current. The evaluation board requires an input voltage from 4.5V to 16V. The output voltage is
preset and can be adjusted from 0.8V to V IN –0.4V
The AOZ1020-EVA circuit has features like current limit, short circuit protection, input under voltage lock out, internal soft start and thermal shut down. It operates at a fixed 500kHz switching frequency. The current mode control and integrated internal MOSFET minimize component count, board area and total cost.
The AOZ1020 comes in SO-8 packages and is rated over a -40°C to +85°C ambient temperature range.

Features
* 4.5V to 16V operating input voltage range
* Output voltage is preset to 3.3V and adjustable down to 0.8V
* 2A continuous output current
* Fixed 500kHz PWM operation
* Internal soft start
* Cycle-by-cycle current limit
* Short-circuit protection
* Thermal shutdown

Applications
* Point of load DC/DC conversion
* PCIe graphics cards
* Set top boxes
* DVD drives and HDD
* LCD panels
* Cable modems
* Telecom/networking/datacom equipment

AOZ1020AI

Trackback :: http://datasheetblog.com/trackback/1415

댓글을 달아 주세요 Comment