DESCRIPTION
The LTM®8027 is a complete 4A, DC/DC step-down power supply. Included in the package are the switching controller, power switches, inductor and all support components. Operating over an input voltage range of 4.5V to 60V (7.5V minimum voltage to start), the LTM8027 supports output voltages up to 24V, and a switching frequency range of 100kHz to 500kHz, each set by a single resistor. Only the bulk input and output fi lter capacitors are needed to fi nish the design.
The low profi le package (4.32mm) enables utilization of unused space on the bottom of PC boards for high density point of load regulation. A built-in soft-start timer is adjustable with a small capacitor.
The LTM8027 is packaged in a thermally enhanced, compact (15mm × 15mm) and low profi le (4.32mm) over-molded land grid array (LGA) package suitable for automated assembly by standard surface mount equipment. The LTM8027 is Pb-free and RoHS compliant.

FEATURES
*Complete Switch Mode Power Supply
*Wide Input Voltage Range: 4.5V to 60V (7.5V Minimum Voltage to Start)
*Wide Output Voltage Range: 2.5V to 24V (See Table 2)
*4A Output Current
*Programmable Soft-Start
*10μA Shutdown Supply Current
*Selectable Switching Frequency Current Mode Control
*Up to 95% Effi ciency
*Pb-Free (e4) RoHS Compliant Package with Gold Pad Finish
*Tiny, Low Profi le (15mm × 15mm × 4.32mm) Surface Mount LGA Package

APPLICATIONS
*12V and 42V Automotive and Heavy Equipment
*48V Telecom Power Supplies
*Avionics and Industrial Control Systems
*Distributed Power Converters

LTM8027EVPBF, LTM8027IVPBF, LTM8027MPVPBF, LTM8027EV, LTM8027IV

Trackback :: http://datasheetblog.com/trackback/2932

댓글을 달아 주세요 Comment

General Description
The AME8819 is a CMOS linear regulator. It operated from 2.5V to 5.5V input voltage and delivers up to 600mA output current. The AME8819 provide low quiescent current (70uA typ) low dropout voltage (Vout=3.3V, 540mV @ 600mA typ), and excellent PSRR, thus marking them ideal for Data-Communications and battery applications.
The AME8819 provide over temperature and over current protected functions. It is stable with an output capacitance of 2.2uF or larger.

Features
*Input voltage range is from 2.8V to 5.5V
*Output voltage range is from 1.8V to 4.5V
*Low Dropout: 540mV @ 600mA, VOUT = 3.3V
*Guaranteed 600mA Drive Current
*Factory Pre-set output voltage
*Only 2.2mF Output Capacitor Required for Stability (Low ESR MLCC is allowable)
*Provided OTP, current limit
*All AME’s Green Products Meet RoHS Standards

Applications
*Data-Communication
*Laptop, Palmtops, Notebook computers
*Battery Power Equipment
*Handheld Device
*PCMCIA Cards

AME8819AEFT180Z, AME8819AEFT250Z, AME8819AEFT300Z

Trackback :: http://datasheetblog.com/trackback/2896

댓글을 달아 주세요 Comment

Description
The A4447 is a 2 A, high efficiency general-purpose buck regulator designed for a wide variety of applications. The output voltage is adjustable from 0.8 to 24 V, based on a resistor divider and the 0.8 V ± 2 % reference. External components include an external clamping diode, inductor, and filter capacitor. The off-time is determined by an external resistor to ground. It operates in both continuous and discontinuous modes to maintain light load regulation. An internal blanking circuit is used to filter out transients due to the reverse recovery of the external clamp diode. Typical blanking time is 200 ns.
This new device is ideal for various end products including applications with 8 to 50 V input voltage range and require up to 2 A output current, such as uninterruptible power supplies, point of sale (POS) applications, and industrial applications with 24 or 36 V bus.

Features and Benefits
*Wide input voltage range: 8 to 50 V
*Integrated low RDS(on) DMOS switch
*2 A continuous output current
*Adjustable fixed off-time
*Highly efficient
*Adjustable output: 0.8 to 24 V
*Small package with exposed thermal pad

Applications include
*Printer power supplies
*Office automation equipment
*POS thermal, laser, photo, and inkjet printers
*Tape drives
*Industrial applications

A4447SLJTR-T

Trackback :: http://datasheetblog.com/trackback/2888

댓글을 달아 주세요 Comment

Description
The AP1250CMP is a simple, cost-effective and high-speed linear regulator designed to generate termination voltage in double data rate (DDR) memory system to comply with the JEDEC SSTL_2 and SSTL_18 or other specific interfaces such as HSTL, SCSI-2 and SCSI-3 etc. devices requirements. The regulator is capable of actively sinking or sourcing up to 2A while regulating an output voltage to within 40mV. The output termination voltage cab be tightly regulated to track 1/2VDDQ by two external voltage divider resistors or the desired output voltage can be pro-grammed by externally forcing the REFEN pin voltage.
The AP1250CMP also incorporates a high-speed differential amplifier to provide ultra-fast response in line/load transient. Other features include extremely low initial offset voltage, excellent load regulation, current limiting in bi-directions and on-chip thermal shut-down protection.
The AP1250CMP are available in the ESOP-8 (Exposed Pad) surface mount packages.

Features
*Ideal for DDR-I, DDR-II and DDR-III VTT Applications
*Sink and Source 2A Continuous Current
*Integrated Power MOSFETs
*Generates Termination Voltage for SSTL_2, SSTL_18, HSTL, SCSI-2 and SCSI-3 Interfaces.
*High Accuracy Output Voltage at Full-Load
*Output Adjustment by Two External Resistors
*Low External Component Count
*Shutdown for Suspend to RAM (STR) Functionality with High-Impedance Output
*Current Limiting Protection
*On-Chip Thermal Protection
*Available in ESOP-8 (Exposed Pad) Packages
*VIN and VCNTL No Power Sequence Issue
*RoHS Compliant and 100% Lead (Pb)-Free

Application
*Desktop PCs, Notebooks, and Workstations
*Graphics Card Memory Termination
*Set Top Boxes, Digital TVs, Printers
*Embedded Systems
*Active Termination Buses
*DDR-I, DDR-II and DDR-III Memory Systems

Trackback :: http://datasheetblog.com/trackback/2885

댓글을 달아 주세요 Comment

GENERAL DESCRIPTION
The LP2950 and LP2951 are micropower voltage regulators ideally suited for use in battery-powered systems. These devices feature very low quiescent current (typ.75μA), and very low dropout voltage (typ.45mV at light loads and 380mV at 100mA) thus prolonging battery life. The quiescent current increases only slightly in dropout. The LP2950/LP2951 has positive transient protection up to 60V and can survive unregulated input transient up to 20V below ground.
The LP2950 and LP2951 were designed to include a tight initial tolerance (typ. 0.5%), excellent load and line regulation (typ. 0.05%), and a very low output voltage temperature coefficient, making these devices useful as a low-power voltage reference. The LP2950 is offered in the 3-pin TO-92 package. LP2951 is available in 8-pin plastic SOIC and DIP packages and offers three major additional system features. An error flag output warns of a low output voltage, often due to failing batteries on input. The LP2951 also features the logic-compatible shutdown input which enables the regulator to be switched on and off.
The LP2951 device may be pin-strapped for a 5V, 3.3V, or 3V output, or programmed from 1.24V to 29V with an external pair of resistors.

FEATURES
*5V, 3.3V, and 3V Versions at 100mA Output Current
*High Accuracy Output Voltage
*Extremely Low Quiescent Current
*Low Dropout Voltage
*Extremely Tight Load and Line Regulation
*Very Low Temperature Coefficient
*Current and Thermal Limiting
*Needs Minimum Capacitance (1μF) for Stability
*Unregulated DC Positive Transients 60V
ADDITIONAL FEATURES (LP2951 ONLY)
*1.24V to 29V Programmable Output
*Error Flag Warning of Voltage Output Dropout
*Logic Controlled Electronic Shutdown

APPLICATIONS
*Battery Powered Systems
*Portable Consumer Equipment
*Cordless Telephones
*Portable (Notebook) Computers
*Portable Instrumentation
*Radio Control Systems
*Automotive Electronics
*Avionics
*Low-Power Voltage Reference

LP2951, LP2950ACN-X, LP2950CN-X, LP2951ACP-X, LP2951CP-X

Trackback :: http://datasheetblog.com/trackback/2884

댓글을 달아 주세요 Comment

DESCRIPTION
The CAT6218 is a 300mA CMOS low dropout regulator that provides fast response time during load current and line voltage changes.
The quick-start feature allows the use of an external bypass capacitor to reduce the overall output noise without affecting the turn-on time of just 150μs.
With zero shutdown current and low ground current of 55μA typical, the CAT6218 is ideal for batteryoperated devices with supply voltages from 2.3V to 5.5V. An internal under voltage lockout circuit disables the output at supply voltages under 2.1V typical.
The CAT6218 offers 1% initial accuracy and low dropout voltage, 180mV typical at 300mA. Stable operation is provided with a small value ceramic capacitor, reducing required board space and compo–nent cost.
Other features include fold-back current current limit and thermal protection.
The device is available in the low profile (1mm max height) 5-lead thin SOT23 package.

FEATURES
*Guaranteed 300mA output current
*Low dropout voltage of 180mV typical at 300mA
*Stable with 1μF ceramic output capacitor
*External 10nF bypass capacitor for low noise
*Quick-start feature
*No-load ground current of 55μA typical
*Full-load ground current of 80μA typical
*±1.0% output voltage initial accuracy
*±2.0% accuracy over temperature
*“Zero” current shutdown mode
*Fold-back current limit and under-voltage lockout
*Thermal protection
*Thin SOT23-5 package

APPLICATIONS
*Cellular phones
*Battery-powered devices
*Consumer Electronics

CAT6218-180TD-GT3, CAT6218-240TD-GT3, CAT6218-270TD-GT3

Trackback :: http://datasheetblog.com/trackback/2878

댓글을 달아 주세요 Comment

Description
The ZHT431 is a three terminal adjustable shunt regulator offering excellent temperature stability and output current handling capability up to 100mA. The device offers extended operating temperature range working from -55 to +125°C. The output voltage may be set to any chosen voltage between 2.5 and 20 volts by selection of two external divider resistors.
The devices can be used as a replacement for zener diodes in many applications requiring an improvement in zener performance.

Features
*Surface mount SOT223 and SOT23 packages
*2% and 1% tolerance
*Maximum temperature coefficient 67 ppm/°C
*Temperature compensated for operation over the full temperature range
*Programmable output voltage
*50A to 100mA current sink capability
*Low output noise
*Wide temperature range -55 to +125°C

Applications
*Series and shunt regulator
*Voltage monitor
*Over voltage / under voltage protection
*Switch mode power supplies

ZHT431C01L, ZHT431C01STOB, ZHT431C01STZ

Trackback :: http://datasheetblog.com/trackback/2868

댓글을 달아 주세요 Comment

Description
BD95710MUV is a dual-phase switching regulator controller with high output current which can achieve low output voltage (0.4V ~ 3.3V) from AC/DC 5V or 12V. High efficiency for the switching regulator can be realized by utilizing an external N-MOSFET power transistor. A new technology called H3RegTM is a Rohm proprietary control method to realize ultra high transient response against load change without phase compensation capacitance and resistance. For various applications, it is available to select the 3 types of N-MOSFET gate drive voltage (12V: for drive ability, 8V: for intermediate drive ability, 5V: for small real estate).

Features
*H3Reg™ switching Regulator Controller without phase compensation capacitance and resistance
*Ultra High Tolerance Internal Reference Voltage (+/- 1%)
*Thermal Shut Down (TSD), Under Voltage LockOut (UVLO), Adjustable Over Current Protection (OCP), Over Voltage Protection (OVP), Short Circuit protection(SCP) built-in
*Soft start function to minimize rush current during startup
*switching Frequency Variable (f=200kHz~1000kHz)
*Internal Bootstrap Diode
*High Tolerance Current Balance Function
*VQFN024V4040 Package (4.0mm x 4.0mm x 1.0mm)
*Integrated 1-/2-phase switching Function

Applications
Graphic Cards, Desktop PC, Gaming Equipments, Digital Components

BD95710MUV-E2

Trackback :: http://datasheetblog.com/trackback/2842

댓글을 달아 주세요 Comment

Description
The IR3822A SupIRBuckTM is an easy-to-use, fully integrated and highly efficient DC/DC regulator. The onboard switching controller and MOSFETs make the IR3822A a space-efficient solution, providing accurate power delivery for low output voltage applications.
The IR3822A operates from a single 4.5V to 14V input supply and generates an output voltage adjustable from 0.6V to 0.8*Vin at loads up to 6A.
A versatile regulator offering programmability of startup time, power good threshold and current limit, the IR3822A’s fixed 300kHz switching frequency allows the use of small external components.
The IR3822A also features important protection functions, such as Pre-Bias startup, hiccup current limit and thermal shutdown to provide the required system level security in the event of fault conditions.

Features
*Wide Input Voltage Range 2.5V to 21V
*Wide Output Voltage Range 0.6V to 12V
*Continuous 6A Load Capability
*300kHz High Frequency Operation
*Programmable Over-Current Protection
*Programmable PGood Output
*Hiccup Current Limit
*Precision Reference Voltage (0.6V)
*Programmable Soft-Start
*Pre-Bias Start-up
*Thermal Protection
*Thermally Enhanced Package
*Small Size 5mmx6mm QFN
*Pb-Free (RoHS Compliant)

Applications
*Distributed Point-of-Loads
*Server and Workstations
*Embedded Systems
*Storage Systems
*DDR Applications
*Graphics Cards
*Game Consoles
*Computing Peripheral Voltage Regulators

IR3822AMTRPBF

Trackback :: http://datasheetblog.com/trackback/2817

댓글을 달아 주세요 Comment

Description
The EP1117 is a low dropout three-terminal adjustable or fixed-voltage regulator with 1A output current capability. The EP1117 is available in an adjustable version, with output ranging from 1.25V to 10.7V and fixed output voltages of 1.8V, 2.5V, 3.3V and 5.0V. Dropout voltage is guaranteed at a maximum of 1.3V at 1A. On-chip thermal limiting provides protection against any combination of overload that would create excessive junction temperatures. The EP1117 is available in the industry standard 3-pin the low profile surface mount SOT-223 and TO-252 power packages.

Features
*Guaranteed Output Voltage Accuracy within 2%
*Fast Transient Response
*Load Regulation: 0.1% Typ.
*Line Regulation: 0.03% Typ.
*Low Dropout Voltage: 1.1V Typ. at IOUT =1A
*On-chip Thermal Limiting: 150°C Typ.
*Adjustable Output: 1.25~10.7V
*Standard 3-pin SOT-223 and TO252 Power Packages

Applications
*PC peripheral
*Low Voltage Logic Supplies
*Post Regulator for Switching Power Supply

EP1117-F18R, EP1117-D18R, EP1117-F25R, EP1117-D25R

Trackback :: http://datasheetblog.com/trackback/2803

댓글을 달아 주세요 Comment