The TDA2822 is a monolithic integrated circuit in 12+2+2 powerdip, intended for use as dual audio power amplifier in portable radios and TS sets.


Trackback :: http://datasheetblog.com/trackback/505

댓글을 달아 주세요 Comment


Axial Power Schottky rectifier suited for Switch Mode Power Supplies and high frequency DC to
DC converters. Packaged in DO-201AD these devices are intended for use in low voltage, high
frequency inverters, free wheeling, polarity protection and small battery chargers.

1N5820 1N5821 1N5822

Trackback :: http://datasheetblog.com/trackback/495

댓글을 달아 주세요 Comment

 Mosorb devices are designed to protect voltage sensitive components from high voltage, high−energy transients. They have excellent clamping capability, high surge capability, low zener impedance and fast response time. These devices are ON Semiconductor’s exclusive, cost-effective, highly reliable Surmetic™ axial leaded package and are ideally-suited for use in communication systems, numerical controls, process controls, medical equipment, business machines, power supplies and many other industrial/consumer applications, to protect CMOS, MOS and Bipolar integrated circuits.

Specification Features
* Working Peak Reverse Voltage Range − 5.0 V to 45 V
* Peak Power − 1500 Watts @ 1 ms
* ESD Rating of Class 3 (>16 KV) per Human Body Model
* Maximum Clamp Voltage @ Peak Pulse Current
* Low Leakage < 5 uA Above 10 V
* Response Time is Typically < 1 ns
* Pb−Free Packages are Available*


Trackback :: http://datasheetblog.com/trackback/494

댓글을 달아 주세요 Comment

These devices are designed for high–voltage, high–speed power switching inductive circuits where fall time is critical. They are particularly suited for 115 and 220V SWITCHMODE .

* Reverse Biased SOA with Inductive Load @ Tc=100℃
* Inductive Switching Matrix 0.5 ~ 1.5 Amp, 25 and 100℃ Typical tc = 290ns @ 1A, 100℃.
* 700V Blocking Capability

* Switching Regulator’s, Inverters
* Motor Controls
* Solenoid/Relay drivers
* Deflection circuits

MJE13003L-A-TA3-F-T MJE13003L-B-TA3-F-T MJE13003L-C-TA3-F-T
MJE13003L-D-TA3-F-T MJE13003L-E-TA3-F-T MJE13003L-F-TA3-F-T

Trackback :: http://datasheetblog.com/trackback/493

댓글을 달아 주세요 Comment

 The MJE/MJF13007 is designed for high–voltage, high–speed power switching inductive circuits where fall time is critical. It is particularly suited for 115 and 220 V switchmode applications such as Switching Regulators, Inverters, Motor Controls, Solenoid/Relay drivers and Deflection circuits.

* VCEO(sus) 400 V
* Reverse Bias SOA with Inductive Loads @ TC = 100°C
* 700 V Blocking Capability
* SOA and Switching Applications Information
* Two Package Choices: Standard TO–220 or Isolated TO–220
* MJF13007 is UL Recognized to 3500 VRMS, File #E69369


Trackback :: http://datasheetblog.com/trackback/491

댓글을 달아 주세요 Comment

*High current (max. 1.5 A)
* Low voltage (max. 80 V).

* Driver stages in hi-fi amplifiers and television circuits.

* NPN power transistor in a TO-126; SOT32 plastic package.
  PNP complements: BD136, BD138 and BD140.

Trackback :: http://datasheetblog.com/trackback/486

댓글을 달아 주세요 Comment

The MC3361 includes an Oscillator, Mixer, Limiting Amplifier, Quadrature Discriminator, Active Filter, Squelch, Scan Control and Mute Switch. This device is designed for use in FM dual conversion communications equipment.

* Operates from 2.0 to 8.0 V Supply
* Low Drain Current 2.8 mA Typical @ Vcc=4.0 Vdc
* Excellent Sensitivity: Input Limiting Voltage-3.0 dB =2.6㎶ Typical
* low Nimber of External Parts Required
* Operating Frequency Up to 60MHz
* Full ESD protection

MC3361CD MC3361CP
TAG FM, If, low, Power

Trackback :: http://datasheetblog.com/trackback/481

댓글을 달아 주세요 Comment

• Single Chip 700V Sense FET Power Switch
• Precision Fixed Operating Frequency (134kHz)
• Advanced Burst-Mode operation Consumes under 0.1W at 265Vac and no load (FSD210 only)
• Internal Start-up Switch and Soft Start
• Under Voltage Lock Out (UVLO) with Hysteresis
• Pulse by Pulse Current Limit
• Over Load Protection (OLP)
• Internal Thermal Shutdown Function (TSD)
• Auto-Restart Mode
• Frequency Modulation for EMI
• FSD200 does not require an auxiliary bias winding

• Charger & Adaptor for Mobile Phone, PDA & MP3
• Auxiliary Power for White Goods, PC, C-TV & Monitor

The FSD200 and FSD210 are integrated Pulse Width Modulators (PWM) and Sense FETs specially designed for high performance off-line Switch Mode Power Supplies (SMPS) with minimal external components. Both devices are monolithic high voltage power switching regulators which combine an LDMOS Sense FET with a voltage mode PWM control block. The integrated PWM controller features include: a fixed oscillator with frequency modulation for reduced EMI, Under Voltage Lock Out (UVLO) protection, Leading Edge Blanking (LEB), optimized gate turn-on/turnoff driver, thermal shut down protection (TSD), temperature compensated precision current sources for loop compensation and fault protection circuitry.  When compared to a discrete MOSFET and controller or RCC switching converter solution, the FSD200 and FSD210 reduce total component count, design size, weight and at the same time increase efficiency, productivity, and system reliability. The FSD200 eliminates the need for an auxiliary bias winding at a small cost of increased supply power. Both devices are a basic platform well suited for cost effective designs of flyback converters.

FSD210 FSD200 FSD210M FSD200M
TAG FPS, Power, Switch

Trackback :: http://datasheetblog.com/trackback/479

댓글을 달아 주세요 Comment

* Energy Data Linearity: ±0.1% of Reading over 1000:1 Dynamic Range.
* On-Chip Functions: (Real) Energy, I - V, IRMS and VRMS, Energy-to-Pulse Conversion
* Smart “Auto-Boot” Mode from Serial EEPROM Enables Use without MCU.
* AC or DC System Calibration
* Mechanical Counter/Stepper Motor Driver
* Meets Accuracy Spec for IEC 687/1036, JIS
* Typical Power Consumption <12 mW
* Interface Optimized for Shunt Sensor
* V vs. I Phase Compensation
* Ground-Referenced Signals with Single Supply
* On-chip 2.5 V Reference (MAX 60 ppm/°C drift)
* Simple Three-Wire Digital Serial Interface
* Watch Dog Timer
* Power Supply Monitor
* Power Supply Configurations
   VA+ = +5 V; VA- = 0 V; VD+ = +3.3 V to +5 V

 The CS5460A is a highly integrated power measurement solution which combines two ∆Σ
Analog-to-Digital Converters (ADCs), high speed power calculation functions, and a serial interface on a single chip.
It is designed to accurately measure and calculate: Real (True) Energy, Instantaneous Power, IRMS, and VRMS for single phase 2- or 3-wire power metering applications.
The CS5460A interfaces to a low-cost shunt resistor or transformer to measure current, and to a resistive divider or potential transformer to measure voltage.
The CS5460A features a bi*directional serial interface for communication with a micro-controller and a pulse output engine for which the average pulse frequency is proportional to the real power.
The CS5460A has on-chip functionality to facilitate AC or DC system-level calibration.
The “Auto-Boot” feature allows the CS5460A to function ‘stand-alone’ and to initialize itself on system power-up.
In Auto-Boot Mode, the CS5460A reads the calibration data and start-up instructions from an external EEPROM.
In this mode, the CS5460A can operate without a microcontroller, in order to lower the total bill-of-materials cost.


TAG Energy, ic, Power

Trackback :: http://datasheetblog.com/trackback/209

댓글을 달아 주세요 Comment

Housed in SOIC−8 or PDIP−8 package, the NCP1200A enhances the previous NCP1200 series by offering a reduced optocoupler current together with an increased drive capability. Due to its novel concept, the circuit allows the implementation of complete off−line AC−DC adapters, battery charger or a SMPS where standby power is a key parameter.
With an internal structure operating at a fixed 40 kHz, 60 kHz or 100 kHz, the controller supplies itself from the high−voltage rail, avoiding the need of an auxiliary winding. This feature naturally eases the designer task in battery charger applications. Finally, current−mode control provides an excellent audio−susceptibility and inherent pulse−by−pulse control.
When the current setpoint falls below a given value, e.g. the output power demand diminishes, the IC automatically enters the so−called skip cycle mode and provides excellent efficiency at light loads.
Because this occurs at a user adjustable low peak current, no acoustic noise takes place.
The NCP1200A features an efficient protective circuitry which, in presence of an overcurrent condition, disables the output pulses while the device enters a safe burst mode, trying to restart. Once the default has gone, the device auto−recovers.

• Pb−Free Packages are Available
• No Auxiliary Winding Operation
• Auto−Recovery Internal Output Short−Circuit Protection
• Extremely Low No−Load Standby Power
• Current−Mode Control with Skip−Cycle Capability
• Internal Temperature Shutdown
• Internal Leading Edge Blanking
• 250 mA Peak Current Capability
• Internally Fixed Frequency at 40 kHz, 60 kHz and 100 kHz
• Direct Optocoupler Connection
• SPICE Models Available for TRANsient and AC Analysis
• Pin to Pin Compatible with NCP1200

NCP1200AP40, NCP1200AP40G, NCP1200AD40R2, NCP1200AP60, NCP1200AP60G
NCP1200AD60R2, NCP1200AD60R2G, NCP1200AP100, NCP1200AP100G, NCP1200AD100R2

Trackback :: http://datasheetblog.com/trackback/121

댓글을 달아 주세요 Comment