DESCRIPTION
The LX8585/85A Series ICs are low dropout three-terminal regulators with a minimum of 4.6A output current. Pentium® Processor and Power PCTM applications requiring fast transient response are ideally suited for this product family. The LX8585A is guaranteed to have < 1.2V at 4.6A, while the LX8585 are specified for 1.4V, making them ideal to provide well regulated outputs of 2.5V to 3.6V using a 5V input supply. Fixed versions are also available and specified in the Available Options table below. Current limit is trimmed above 4.6A to ensure adequate output current and controlled short-circuit current. On-chip thermal limiting provides protection against any possible overload that would create excessive junction temperatures. The LX8585/85A family is available in both through-hole and surface-mount versions of the industry standard 3-pin TO-220 / TO-263 power packages.
The LX1431 Programmable Reference and LX8585A Series products offer precision output voltage and are ideal for use in VRE applications (see application below). For higher current applications, see the LX8584 data sheet.

KEY FEATURES
*Three Terminal Adjustable or Fixed Output
*Guaranteed < 1.2V headroom @ 4.6A (LX8585A)
*Guaranteed < 1.4V headroom @ 4.6A (LX8585)
*Guaranteed < 1.3V Headroom @ 3A
*Output Current of 4.6A Minimum
*Fast Transient Response
*1% Voltage Reference Initial Accuracy
*Output Short Circuit Protection
*Built-In Thermal Shutdown

APPLICATIONS
*Pentium Processor Supplies
*Power PC Supplies
*Microprocessor Supplies
*Low Voltage Logic Supplies
*Battery Powered Circuit
*Post Regulator for Switching Supply
*CYRIX® 6x86™ Supplies
*AMD-K5™ Supplies

LX858A-xx, LX8585-00, LX85A-00, LX8585-15, LX85A-15, LX8585-33, LX85A-33

Description
The GM7800 series are classic regulators, which are useful in a wide range of applications. For example, you can use them for local on-card regulation to eliminate the distribution and problems associated with single point regulation.
The wide range of output voltages (5V to 27V) make them useful in an endless list of applications. Although designed as fixed voltage regulators, you can add a few external components to make adjustable voltages and currents.
Current limiting prevents the peak output current to a safe value. Safe-area protection of the output transistor limits internal power dissipation. If internal power dissipation becomes too high for the heat sinking provided, the thermal shutdown circuit activates to prevent the regulator from overheating. These versatile workhorses are easy to use. You do not need to bypass the output, although this does improve transient response. Input bypass is needed only if you place the regulator far from the filter capacitor of the power supply.
The GM7800 series is available in TO-220, TO-252 and TO-263 packages.

Features
*Output current up to 1.5A
*Output Voltages 5V, 6V, 8V, 8.5V, 9V, 10V, 12V, 15V, 18V, 20V, 24V and 27V
*3- Terminal Regulators
*Internal Thermal Overload Protection
*Internal Short-Circuit Current Limiting
*Output Transistor Safe-Area Protection
*TO-220, TO-252 and TO-263 Packages
*High Power Dissipation Capability
*Direct replacements for LM78xx

Application
*Post-Regulator Switching DC/DC Converters
*Bias Supply for Analog Circuits
*Instrumentation and Audio Systems Logic Systems
*Others too numerous to mention

GM7805, GM7806, GM7808, GM7885, GM7809, GM7810

General Description
The AME1117 is a 1A low-dropout positive voltage regulator. It is available in fixed and adjustable output voltage versions. Overcurrent and thermal protection are integrated onto the chip. Output current will limit as while it reaches the pre-set current or temperature limit. The dropout voltage is specified at 1.4V Maximum at full rated output current. The AME1117 series provides excellent regulation over line, load and temperature variations.

Features
*Low Dropout Voltage ----- 1.4V at 1A
*Adjustable or Fixed Voltages: 1.8V, 2.5V, 3.3V, 5.0V
*Adjust Pin Current Less than 120mA
*Overcurrent Protection
*Thermal Protection
*Available in TO-220, TO-252, SOT-223
*All AME's Lead Free Products Meet RoHS Standards

Applications
*High Efficiency Linear Regulators
*Post Regulators for Switching Supplies
*5V to 3.3V Voltage Converter
*Battery Charger

AME1117ACBTZ, AME1117BCBTZ, AME1117CCBTZ, AME1117DCBTZ

Description
GM6250 combine high accuracy with very low power consumption, and provides high output current even when the application requires extremely low input-output voltage differential.
GM6250 includes a precision voltage reference, an error correction circuit, over-temperature protection, and a current limited output driver. Fast transient response to load variations provides excellent stability under dynamic load conditions.
GM6250 comes in SOT-23 (150mW), SOT-89 (500mW) and TO-92 packages.

Features
*Maximum output current 250mA (within maximum power dissipation)
*Output voltage: from 1.8 V to 5.0V in 0.1V increments
*Output voltage ±2%
*CMOS low power consumption, typically 1.0μA at VOUT = 5.0V
*Input stability typically 0.2%/ V
*Ultra-low dropout voltage 0.38V @ IOUT = 200mA at VOUT = 5.0V
*Small input/ output differential: 0.4V at 160mA (VOUT = 3.3V)
*SOT-23 (150mW), SOT-89 (500mW) and TO-92 packages

Application
*Palmtops
*Portable Cameras
*Video Recorders
*Battery Powered Equipment
*Reference Voltage Sources

GM6250-1.5ST23R, GM6250-1.5ST89R, GM6250-1.5T92B, GM6250-1.5T92RL

General Description
• The LA317 is an adjustable 3-terminal positive voltage regulator with a very low dropout of 1.2V at 1A output current.
Using 2 external resistors, the LA317 can provide an adjustable output voltage down to 1.25V.
• The LA317 is available in standard SOT-223, D-PACK, TO-220 and D2-PACK packages.

Features
• Typical 1% output voltage tolerance
• Typical 0.01%/V line reglation
• Typical 0.2% Load Regulation
• Very low dropout voltage: 1.2V at 1A output current
• Trimmed current limit
• On-chip thermal protection
• RoHS Compliance

Applications
• PC Motherboard
• LCD Monitor
• Graphic Card
• DVD Player
• Network Interface Card/Switch
• Telecom Equipment
• Printer and other Peripheral Equipment

Features
* Fast Transient Response
* Guaranteed Dropout Voltage at Multiple Currents
* Load Regulation : 0.05% Typ.
* Line Regulation : 0.03% Typ.
* Low Dropout Voltage : 1.2V Typ. at IOUT =3A
* Trimmed Current Limit : 3A Typ. at TJ=125 °C
* On-Chip Thermal Limiting : 150 °C Typ.
* Standard 3-pin TO-220 , TO-252 and TO-263 Power Package

Applications
* PentiumTM Processor Supplies
* PowerPCTM Supplies
* Low Voltage Logic Supplies
* Battery-Powered Circuitry
* Post Regulator for Switching Power Supply

General Description
The APL1085 is a low dropout three-terminal adjustable regulator with 3A output current capability. In order to obtain lower dropout voltage and faster transient response, which is critical for low voltage applications, the APL1085 has been optimized. The output available voltage range of adjustable version is from 1.25~5.75V with an input supply below 7V , and the fixed 3.3V output voltage device is also available.
Current limit is trimmed to ensure specified output current and controlled short-circuit current. On-chip thermal limiting provides protection against any combination of overload that would create excessive junction temperatures.
The APL1085 is available in both the through-hole and surface mount versions of the industry standard

FEATURES
* FIXED AND ADJUSTABLE VERSIONS
* 2.85V MODEL FOR SCSI-2 ACTIVE TERMINATION
* OUTPUT CURRENT:
REG1117: 800mA max
REG1117A: 1A max
* OUTPUT TOLERANCE: 1% max
* DROPOUT VOLTAGE:
REG1117: 1.2V max at IO = 800mA
REG1117A: 1.3V max at IO = 1A
* INTERNAL CURRENT LIMIT
* THERMAL OVERLOAD PROTECTION
* SOT-223 AND DDPAK SURFACE-MOUNT PACKAGES

APPLICATIONS
* SCSI-2 ACTIVE TERMINATION
* HAND-HELD DATA COLLECTION DEVICES
* HIGH EFFICIENCY LINEAR REGULATORS
* BATTERY-POWERED INSTRUMENTATION
* BATTERY MANAGEMENT CIRCUITS FOR NOTEBOOK AND PALMTOP PCs
* CORE VOLTAGE SUPPLY: FPGA, PLD, DSP, CPU

DESCRIPTION
The REG1117 is a family of easy-to-use three-terminal voltage regulators. The family includes a variety of fixedand adjustable-voltage versions, two currents (800mA and 1A) and two package types (SOT-223 and DDPAK). See the chart below for available options.
Output voltage of the adjustable versions is set with two external resistors. The REG1117 low dropout voltage allows its use with as little as 1V input-output voltage differential.
Laser trimming assures excellent output voltage accuracy without adjustment. An NPN output stage allows output stage drive to contribute to the load current for maximum efficiency.

REG1117A
REG1117FA

Features
* 3 Ampere low dropout voltage
* Embedded overtemperature, overcurrent protections
* Adjustable overcurrent limitation
* Output overload monitoring/signalling
* Adjustable output voltage
* Inhibit (ON/OFF) TTL Compatible Control
* Programmable output short circuit current
* Remote sensing operation
* RADHARD: Guaranteed up to 300krad in MIL 1019.6 High Dose Rate and 0.01Rad/sec ELDRS Conditions
* Heavy IONS SEL, SEU Immune. Sustains 2x1014 proton/cm2, And 2x1014 neutron/cm2

Description
The RHFL4913 ADJUSTABLE is a high performance Adjustable Positive Voltage Regulator providing exceptional radiation performances, tested in accordance with Mil Std 1019.6 ELDRS conditions.
Available in Flat-16 and new SMD5C hermetic ceramic packages and as QmlV-Die, it is specifically intended for Space and harsh radiation environments. Input supply range is up to 12 volts.
The RHFL4913 ADJUSTABLE is Qml-V Qualified, DSCC Smd is 5962F02524.

RHFL4913KPA-01V
RHFL4913KPA-02V

Features
• 1.3V Maximum Dropout at Full Load Current
• Fast Transient Response
• Output Current Limiting
• Built-in Thermal Shutdown
• Good Noise Rejection
• 3-Terminal Adjustable or Fixed 1.8V, 2.5V, 3.3V
• SOT223-3L and TO252-3L, Packages in “Green”
Molding Compound (No Br, Sb)
• Lead Free Finish / RoHS Compliant (Note 1)

General Description
APX1117 is a low dropout positive adjustable or fixed-mode voltage regulator with 1A output current capability. The product is specifically designed to provide well-regulated supply for
applications such as high-speed bus termination and low current 3.3V logic supply. APX1117 is also well suited for other applications such as VGA cards. APX1117 is guaranteed to have lower than 1.3V dropout at full load current making it ideal to provide well-regulated outputs of 1.25V to 5.0V with 6.3V to 18V input supply

Applications
• PC Peripheral
• Communication

APX1117E
APX1117D

* OUTPUT CURRENT TO 1.5A
* OUTPUT VOLTAGES OF 5; 5.2; 6; 8; 8.5; 9;10; 12; 15; 18; 24V
* THERMAL OVERLOAD PROTECTION
* SHORT CIRCUIT PROTECTION
* OUTPUT TRANSITION SOA PROTECTION

DESCRIPTION
The L7800 series of three-terminal positive regulators is available in TO-220, TO-220FP, TO-220FM, TO-3 and D2PAK packages and several fixed output voltages, making it useful in a
wide range of applications. These regulators can provide local on-card regulation, eliminating the distribution problems associated with single point regulation. Each type employs internal current limiting, thermal shut-down and safe area protection, making it essentially indestructible. If adequate heat sinking is provided, they can deliver over 1A output current. Although designed primarily as fixed voltage regulators, these devices can be used with external components to obtain adjustable voltage and currents.


L7805 L7805C L7852C L7806 L7806C L7808 L7808C L7885C L7809CL7805CV L7852CV L7806CV