'Plug' related articles 1

  1. 2008/06/05 IMP5218 - 9--Line Plug and Play SCSI Terminator

DESCRIPTION
 The 9-channel IMP5218 SCSI terminator is part of IMP's family of highperformance SCSI terminators that deliver true UltraSCSI performance.
The BiCMOS design offers superior performance over first generation linear regulator/resistor based terminators.
The IMP5218 has two disconnect pins for SCSI Plug and Play (PnP) applications.
IMP's new architecture employs high-speed adaptive elements for each channel, thereby providing the fastest response possible - typically 35MHz, which is 100 times faster than the older linear regulator terminator approach.
The bandwidth of terminators based on the older regulator/resistor terminator architecture is limited to 500kHz since a large output stabilization capacitor is required.
The IMP architecture eliminates the external output compensation capacitor and the need for transient output capacitors while maintaining pin compatibility with first generation designs. Reduced component count is inherent with the IMP5218.
The IMP5218 architecture tolerates marginal system designs.
A key improvement offered by the IMP5218 lies in its ability to insure reliable, error-free communications even in systems which do not adhere to recommended SCSI hardware design guidelines, such as improper cable lengths and impedance.
Frequently, this situation is not controlled by the peripheral or host designer.
For portable and configurable peripherals, the IMP5218 can be placed in a sleep mode with two disconnect signals.
When disabled, the quiescent current is typically 375μA, and the outputs are in a high impedance state.

Key Features
* SCSI plug and play
- Dual disconnect pins
- Logic LOW disconnects lines
* Hot swap compatible
* Ultra-Fast response for Fast-20 SCSI applications
* 35MHz channel bandwidth
* 3.5V operation
* Less than 3pF output capacitance
* 375μA disable-mode current
* Thermally self limiting
* No external compensation capacitors
* Implements 8-bit or 16-bit (wide) applications
* Compatible with active negation drivers (60mA/channel)
* Compatible with passive and active terminations
* Approved for use with SCSI 1, 2, 3 and UltraSCSI

IMP5218CDW
IMP5218CDWT
IMP5218CPW
IMP5218CPWT

Trackback :: http://datasheetblog.com/trackback/1662

댓글을 달아 주세요 Comment