Features
■ Very high speed-10 MBit/s
■ Superior CMR-10 kV/µs
■ Double working voltage-480V
■ Fan-out of 8 over -40°C to +85°C
■ Logic gate output
■ Strobable output
■ Wired OR-open collector
■ U.L. recognized (File # E90700)

Applications
■ Ground loop elimination
■ LSTTL to TTL, LSTTL or 5-volt CMOS
■ Line receiver, data transmission
■ Data multiplexing
■ Switching power supplies
■ Pulse transformer replacement
■ Computer-peripheral interface

Description
 The 6N137, HCPL-2601/2611 single-channel and HCPL-2630/ 2631 dual-channel optocouplers consist of a 850 nm AlGaAS LED, optically coupled to a very high speed integrated photodetector logic gate with a strobable output. This output features an open collector, thereby permitting wired OR outputs. The coupled parameters are guaranteed over the temperature range of -40°C to +85°C. A maximum input signal of 5 mA will provide a minimum output sink current of 13mA (fan out of 8).
 An internal noise shield provides superior common mode rejection of typically 10kV/µs. The HCPL- 2601 and HCPL- 2631 has a minimum CMR of 5 kV/µs. The HCPL-2611 has a minimum
CMR of 10 kV/µs.

HCPL-2601
HCPL-2611
HCPL-2630
HCPL-2631

Trackback :: http://datasheetblog.com/trackback/615

댓글을 달아 주세요 Comment

Features
• Surface Mountable
• Very Small, Low Profile JEDEC Registered Package Outline
• Compatible with Infrared Vapor Phase Reflow and Wave Soldering Processes
• Internal Shield for High Common Mode Rejection (CMR) HCPL-M601: 10,000 V/ms at
VCM = 50 V
HCPL-M611: 15,000 V/ms at
VCM = 1000 V
• High Speed: 10 Mbd
• LSTTL/TTL Compatible
• Low Input Current Capability: 5 mA
• Guaranteed ac and dc Performance over Temperature: -40°C to 85°C
• Recognized under the Component Program of U.L. (File No. E55361) for Dielectric Withstand Proof Test Voltage of 2500 Vac, 1 Minute

Description
These small outline high CMR, high speed, logic gate optocouplers are single channel devices in a five lead miniature footprint. They are electrically equivalent to the following Agilent optocouplers (except there is no output enable feature):
The SO-5 JEDEC registered (MO- 155) package outline does not require “through holes” in a PCB. This package occupies approximately one fourth the footprint area of the standard dual-in-line package. The lead profile is designed to be compatible with standard surface mount processes. The HCPL-M600/01/11 optically coupled gates combine a GaAsP light emitting diode and an integrated high gain photon detector. The output of the detector I.C. is an Open-collector Schottky-clamped transistor. The internal shield provides a guaranteed common mode transient immunity specification of 5,000 V/ms for the HCPL-M601, and 10,000 V/ms for the HCPLM611. This unique design provides maximum ac and dc circuit isolation while achieving TTL compatibility. The optocoupler ac and dc operational parameters are guaranteed from -40°C to 85°C allowing trouble free system performance.

HCPL-M600 HCPL-M601 HCPL-M611 6N137 HCPL-0600 HCPL-2601 HCPL-0601

Trackback :: http://datasheetblog.com/trackback/360

댓글을 달아 주세요 Comment

• 250 V Phototriac Driver Output
• Gallium-Arsenide-Diode Infrared Source and Optically-Coupled Silicon Traic Driver (Bilateral Switch)
• UL Recognized . . . File Number E65085
• High Isolation . . . 7500 V Peak
• Output Driver Designed for 220 V ac
• Standard 6-Terminal Plastic DIP
• Directly Interchangeable with Motorola MOC3020, MOC3021, MOC3022, and MOC3023
• Direct Replacements for:
– TRW Optron OPI3020, OPI3021, OPI3022, and OPI3023;
– General Instrument MCP3020, MCP3021, and MCP3022;
– General Electric GE3020, GE3021, GE3022, and GE3023

MECHANICAL INFORMATION
Each device consists of a gallium-arsenide infrared-emitting diode optically coupled to a silicon phototriac mounted on a 6-terminal lead frame encapsulated within an electrically nonconductive plastic compound. The case can withstand soldering temperature with no deformation and device performance characteristics remain stable when operated in high-humidity conditions.

MOC3021 MOC3023 MOC3024

Trackback :: http://datasheetblog.com/trackback/285

댓글을 달아 주세요 Comment

DESCRIPTION
The 6N137, HCPL-2601/2611 single-channel and HCPL-2630/2631 dual-channel optocouplers consist of a 850 nm AlGaAS LED, optically coupled to a very high speed integrated photodetector logic gate with a strobable output. This output features an open collector, thereby permitting wired OR outputs. The coupled parameters are guaranteed over the temperature range of -40°C to +85°C. A maximum input signal of 5 mA will provide a minimum output sink current of 13 mA (fan out of 8).
An internal noise shield provides superior common mode rejection of typically 10 kV/µs. The HCPL- 2601 and HCPL- 2631 has a minimum CMR of 5 kV/µs. The HCPL-2611 has a minimum CMR of 10 kV/µs.

FEATURES
• Very high speed-10 MBit/s
• Superior CMR-10 kV/µs
• Double working voltage-480V
• Fan-out of 8 over -40°C to +85°C
• Logic gate output
• Strobable output
• Wired OR-open collector
• U.L. recognized (File # E90700)

HCPL-2601 HCPL-2631 HCPL-2611 HCPL-2630

Trackback :: http://datasheetblog.com/trackback/199

댓글을 달아 주세요 Comment