'OPEN FRAME' related articles 1

  1. 2008/08/26 BPW-7010-100W AC-DC Open Frame Power Supply
Features
*Input Voltage: 85~264VAC
*Input Frequency: 47~63Hz
*Input Current: 3A at 115VAC or 1.5A at 230VAC
*Inrush Current: < 30A at 115VAC input or < 60A at 230VAC input, under 24oC cold start
*Load Range: With all output at 60% rated load, +5V is between 4.95V and 5.05V.
 All other outputs are within the accuracy range.
 Effective so long as the max. load does not exceed 90W continuous convection cooling
*Ripple and Noise: Peak to peak ripple and noise for each output is < 1% of each  output's voltage at rated load
*Line Regulation: < +/-1% for rated load with +/-10% change in input voltage
*Load Regulation: < +/-1% for +5V and < +/-5% for all other outputs
*Hold Up Time: > 16ms at 115VAC input and rated load
*Efficiency: > 70% measured at nominal line and rated load
*Altitude: > 10,000 feet
*Protection: Built-in crowbar circuit. Trip point is between 5.7~7V.
 AC line off and on cycle for over voltage recovery and restart hiccup mode protection against   short circuit or over load condition
*Temperature: 0~50oC forced air 30CFM needed when output > 80W (operating); -40~+85oC (storage)
*Connectors:
AC Input: Molex 5273-05A withdraw 2-pin or equivalent device
DC Output: Molex 5273-12A or equivalent device
*Dimensions: 7.0 x 20.0 x 3.8 cm at tolerance +/-0.4mm
Safety Standards
*Safety: UL 1950 / CSA 22.2 No.234 / VDE EN60950
*EMI: FCC class B / EN55022 B
*EMS: Level 3 of IEC-802, 803, 804, 805

Trackback :: http://datasheetblog.com/trackback/1866

댓글을 달아 주세요 Comment