Functional Description
The PMB2201 is a modulator and mixer circuit with high integration level. It includes a direct quadrature modulator and a double balanced Gilbert cell mixer with according bias circuitry.
The up/down conversion mixer combines two external signals at the RF and IF inputs. The IF input is suited for the lower frequency signal because of its linear transfer function to the mixer output. The higher frequency signal is fed to the RF input to switch the Gilbert cell mixer. In a typical application the wanted mixer output product is bandpass filtered and then fed to the modulator LO input. The mixer may also be used to convert the modulator output signal from E/EX via the IF/IFX input by mixing with a local oscillator signal RF/RFX to higher frequencies up to 2.5 GHz.
The modulator generates two orthogonal carriers which are mixed with the baseband modulation signals A and B in Gilbert multipliers. The outputs of the Gilbert cells are added and amplified by a linear output stage. The modulated signal is available at the open collector output E,EX. The voltage TREF can be used for DC biasing of the modulation inputs A, AX, B, BX externally.
The modulator and the mixer have separate power supplies and grounds. They can be powered down independently. Due to the power down concept the modulator can be used without or in conjunction with the up/down conversion mixer part.
For applications in the frequency range from 1.4GHz to 2.5GHz the derivative PMB2202
is offered.

Features
*Direct quadrature modulator with separate additional double balanced active mixer
*Direct quadrature modulation
*LO frequency range from 800 MHz to 1.5 GHz
*Generation of orthogonal carriers without external elements and without trimming
*typ. 40 dB carrier rejection, typ. 44 dB SSB rejection
*typ. 43 dB rejection of third order products at 1 Vpp A/B drive level at fLO = 1.5 GHz
*3 dBm output power with appropriate output power matching network and at 1Vpp A/B baseband drive level
*Double balanced Gilbert cell mixer
*RF and IF frequency range from DC to 2.5 GHz
*typ. 39 dB carrier rejection
*low noise
*Supply voltage range from 2.7 V to 4.5 V
*Power down mode
*P-TSSOP-24 package
*Temperature range -30° to 85°C

Applications
*Vector modulated digital mobile cellular systems as GSM, PDC-800, PDC-1.5, DAMPS etc.
*Various modulation schemes, such as PM, PSK, FSK, QAM, QPSK, GMSK etc.
*Analog systems with FM and AM modulation
*Space and power saving optimizations of existing discrete transmitter circuits
TAG DC, Mixer

Trackback :: http://datasheetblog.com/trackback/2662

댓글을 달아 주세요 Comment

General Description
The MAX19999 dual-channel downconverter provides 8.3dB of conversion gain, +24dBm input IP3, +11.4dBm 1dB input compression point, and a noise figure of 10.5dB for 3000MHz to 4000MHz WiMAX™ and LTE diversity receiver applications. With an optimized LO frequency
range of 2650MHz to 3700MHz, this mixer is ideal for low-side LO injection architectures.
In addition to offering excellent linearity and noise performance, the MAX19999 also yields a high level of component integration. This device includes two double-balanced passive mixer cores, two LO buffers, and a pair of differential IF output amplifiers. Integrated onchip baluns allow for single-ended RF and LO inputs.
The MAX19999 requires a nominal LO drive of 0dBm and a typical supply current of 388mA at VCC = +5.0V or 279mA at VCC = +3.3V.
The MAX19999 is pin compatible with the MAX19997A 1800MHz to 2900MHz mixer and pin similar with the MAX19985/MAX19985A and MAX19995/MAX19995A series of 700MHz to 2200MHz mixers, making this entire family of downconverters ideal for applications where a common PCB layout is used across multiple frequency bands.
The MAX19999 is available in a compact 6mm x 6mm, 36-pin thin QFN package with an exposed pad. Electrical performance is guaranteed over the extended temperature range, from TC = -40°C to +85°C.

Features
*3000MHz to 4000MHz RF Frequency Range
*2650MHz to 3700MHz LO Frequency Range
*50MHz to 500MHz IF Frequency Range
*8.3dB Conversion Gain
*+24dBm Input IP3
*10.5dB Noise Figure
*+11.4dBm Input 1dB Compression Point
*74dBc Typical 2 x 2 Spurious Rejection at PRF = -10dBm
*Dual Channels Ideal for Diversity Receiver Applications
*Integrated LO Buffer
*Integrated LO and RF Baluns for Single-Ended Inputs
*Low -3dBm to +3dBm LO Drive
*Pin Compatible with the MAX19997A 1800MHz to 2900MHz Mixer
*Pin Similar to the MAX9995/MAX9995A and MAX19995/MAX19995A 1700MHz to 2200MHz
Mixers and the MAX9985/MAX9985A and MAX19985/MAX19985A 700MHz to 1000MHz
Mixers
*39dB Channel-to-Channel Isolation
*Single +5.0V or +3.3V Supply
*External Current-Setting Resistors Provide Option for Operating Device in Reduced-Power/Reduced-Performance Mode

Applications
*3.5GHz WiMAX and LTE Base Stations
*Fixed Broadband Wireless Access
*Microwave Links
*Wireless Local Loop
*Private Mobile Radios
*Military Systems

MAX19999ETX+, MAX19999ETX+T

Trackback :: http://datasheetblog.com/trackback/2200

댓글을 달아 주세요 Comment

DESCRIPTION
The NE/SA612A is a low-power VHF monolithic double-balanced mixer with on-board oscillator and voltage regulator. It is intended for low cost, low power communication systems with signal frequencies to 500MHz and local oscillator frequencies as high as 200MHz. The mixer is a “Gilbert cell” multiplier configuration which provides gain of 14dB or more at 45MHz.
The oscillator can be configured for a crystal, a tuned tank operation, or as a buffer for an external L.O. Noise figure at 45MHz is typically below 6dB and makes the device well suited for high performance cordless phone/cellular radio. The low power consumption makes the NE/SA612A excellent for battery operated equipment. Networking and other communications products can benefit from very low radiated energy levels within systems. The NE/SA612A is available in an 8-lead dual in-line plastic package and an 8-lead SO (surface mounted miniature package).

FEATURES
*Low current consumption
*Low cost
*Operation to 500MHz
*Low radiated energy
*Low external parts count; suitable for crystal/ceramic filter
*Excellent sensitivity, gain, and noise figure

APPLICATIONS
*Cordless telephone
*Portable radio
*VHF transceivers
*RF data links
*Sonabuoys
*Communications receivers
*Broadband LANs
*HF and VHF frequency conversion
*Cellular radio mixer/oscillator

NE612AN, NE612AD, SA612AN, SA612AD

Trackback :: http://datasheetblog.com/trackback/2081

댓글을 달아 주세요 Comment

Product Description
The WJZ1020H is a passive double-balanced diode-ring mixer that provides high dynamic range performance in a Lead Free/ RoHS-compliant surface mount package.
The mixer is nominally driven with a LO input power of +17dBm to optimize its performance. Other WJZ models are available for other LO drive levels.
Targeted applications include frequency up/down conversion, modulation and demodulation for receivers and transmitters used in 2.5G and 3G GSM/CDMA/W-CDMA systems.
The device can also be used in Radar, Satellite,
Test / Medical Instruments, Avionics communications and Navigation markets.

Product Features
* +27.8 dBm Input IP3
* RF: 1 – 2700 MHz
* LO: 1 – 2700 MHz
* IF: 1 – 2000 MHz
* +17 dBm LO Drive Level
* No Internal Solder Connections
* Lead Free/RoHS-compliant SMT package
* No External Bias Required

Applications
* Up/down frequency conversion
* Phase Detector
* Image Rejection
* Current Controlled Attenuator

WJZ1020H-PCB

Trackback :: http://datasheetblog.com/trackback/1715

댓글을 달아 주세요 Comment

Product Description
 The ML485 high linearity converter combines a passive GaAsFET mixer with an integrated LO driver in an ultrasmall lead-free/green/RoHS-compliant MSOP-8 package.
The High dynamic range mixer is able to operate across a wide 1.6-3.2 GHz frequency range to achieve +35 dBm Input IP3 while drawing a very low 40mA current.
The ML485 can be used as an upconverter or downconverter in a low-side or high-side LO configuration.
A LO buffer amplifier is integrated on the chip to allow for operation directly from a synthesizer, requiring only 0 dBm of drive level.
The dual-stage LO driver provides a stable input power level into the mixer to allow for consistent performance over a wide range of LO power levels.
The converter requires no external baluns and supports a wide range of IF frequencies.
Typical applications include frequency up/down conversion, modulation and demodulation for receivers and transmitters used in 2.5G and 3G mobile infrastructure.
Due to the wide frequency range of operation, the converter can also be used for WiMAX, WiBro, ISM, and fixed wireless applications.

Product Features
* High dynamic range mixer with integrated LO driver
* +35 dBm Input IP3
* 8 dB Conversion Loss
* RF: 1600 – 3200 MHz
* LO: 1400 – 3500 MHz
* IF: 50 – 300 MHz
* 5V Supply @ 40 mA
* 0 dBm Drive Level
* RoHS-compliant MSOP8 (14mm2)

Applications
* PCS / 3G Base station / Repeaters
* TD-SCDMA / WCDMA
* WiMAX / WiBro
* ISM / Fixed Wireless
* HPA Feed Back Paths

ML485-G
ML485-PCB

TAG Amp, Mixer

Trackback :: http://datasheetblog.com/trackback/1660

댓글을 달아 주세요 Comment

General Description
 Mimix Broadband’s 32.0-42.0 GHz GaAs MMIC sub-harmonic image reject mixer can be used as an upor down-converter.
The device has a conversion loss of 9.0 dB with 18.0 dB image rejection across the band.
I and Q mixer outputs are provided and an external 90 degree hybrid is required to select the desired sideband.
This MMIC uses Mimix Broadband’s 2 μm GaAs HBT device model technology, and is based upon electron beam lithography to ensure high repeatability and uniformity.
The chip has surface passivation to protect and provide a rugged part with backside via holes and gold metallization to allow either a conductive epoxy or eutectic solder die attach process. This device is well suited for Millimeter-wave Point-to-Point Radio, LMDS, SATCOM and VSAT applications.

Features
* Sub-harmonic Image Reject Mixer
* GaAs HBT Technology
* 9.0 dB Conversion Loss
* 18.0 dB Image Rejection
* 100% On-Wafer RF Testing
* 100% Visual Inspection to MIL-STD-883
* Method 2010

XM1003-BD-000V
XM1003-BD-EV1

Trackback :: http://datasheetblog.com/trackback/1623

댓글을 달아 주세요 Comment

Typical Applications
The HMC128 is ideal for:
• Microwave & VSAT Radios
• Test Equipment
• Military EW, ECM, C3I
• Space Telecom


Features
Conversion Loss: 7 dB
LO to RF and IF Isolation: >36 dB
Input IP3: +18 dBm
No DC Bias Required
Die Size: 1.45 x 1.45 x 0.1 mm

General Description
The HMC128 is a miniature double-balanced mixer chip that can be used as an upconverter or downconverter.
The device is a passive diode/balun type mixer with high dynamic range. Noise fi gure is essentially equal to the conversion loss. The mixer can handle larger signal levels than active mixers due to the high third order intercept. MMIC implementation provides exceptional balance in the circuit resulting in high LO/ RF and LO/IF isolations. This mixer can operate over a wide LO Drive input of +9 to +15 dBm.
TAG GaAs, Mixer

Trackback :: http://datasheetblog.com/trackback/1408

댓글을 달아 주세요 Comment

Typical Applications
The HMC557 is ideal for:
• WiMAX & Fixed Wireless
• Microwave Radio
• Military & Space
• Communications, Radar & EW
• Test Equipment & Sensors

Features
High LO/RF Isolation: 48 dB
Wide IF Bandwidth: DC - 3 GHz
Passive Double Balanced Topology
Low Conversion Loss: 7 dB
Small Size: 1.02 x 0.94 x 0.1 mm

General Description
The HMC557 is a passive double balanced mixer that can be used as an upconverter or downconverter between 2.5 and 7 GHz. The miniature monolithic mixer is fabricated in a GaAs MESFET process, and requires no external components or matching circuitry.
The HMC557 operates with LO drive levels as low as +9 dBm and provides excellent LO to RF and LO to IF isolation due to optimized balun structures.
Measurements were made with the chip mounted into in a 50 ohm test fi xture and includes the parasitic effects of wire bond assembly. Connections were made with a 1 mil wire bond with minimal length (<12 mil).

Trackback :: http://datasheetblog.com/trackback/1228

댓글을 달아 주세요 Comment

Features
• 5 MHz to 4 GHz Overall Operating Frequency Range
• 40-400 MHz LOmod range
• 2.7 - 5.5 V Operation (3 V, 25 mA)
• Differential High Impedance i, q Inputs
• On-Chip Linear RC Phase Shifter
• -23 dBm Modulator S.E. Output Power into 50 W at 150 MHz
• -15 dBm Linear (-11 dBm Saturated) Mixer Output Power into 50 W at 1900 MHz
• Mixer Can Be Used for Up/Down Conversion or Disabled (3 V, 10 mA)
• Standby Mode (<1 mA)
• JEDEC Standard SSOP-16 Surface Mount Package

Applications
• NADC, PDC, GSM Handsets and Base Stations
• PCS Handsets and Base Stations
• DLMR Handsets
• CDPD Radios
• ISM Band Wireless Links

General Description
 The HPMX-2007 vector modulator/mixer IC is designed to meet the needs of cellular and
PCS telephone applications. The heart of the IC is a vector (or quadrature) modulator followed
by a Gilbert cell mixer. The modulator and mixer can be used together, drawing only 25 mA from a 3.0 volt supply. The mixer can be disabled by connecting either LOmix or LOmix to VCC, allowing operation of the modulator alone and reducing current drain to only 10 mA.
 The i and q signal inputs are balanced to insure high common mode noise rejection. The output of the mixer is a differential pair of open collectors. One collector can be connected to VCC and the other matched to 50 W using a shunt L, series C network. Alternatively, the output can be matched to 50 W through a 4:1 balun.
 The SSOP-16 package insures that the IC occupies a minimal amount of printed circuit board space. The HPMX-2007 is manufactured using Hewlett-Packard’s 30 GHz ISOSAT-II process which combines stepper lithography, self alignment, ion implantation techniques and gold metallization to produce state-of-the-art RFICs.

HPMX-2007-BLK HPMX-2007-TR1

Trackback :: http://datasheetblog.com/trackback/480

댓글을 달아 주세요 Comment

Typical Applications
High Dynamic Range Infrastructure:
• GSM, GPRS & EDGE
• CDMA & W-CDMA
• Cable Modem Termination Systems

Features
+35 dBm Input IP3
Conversion Loss: 8.8 dB
No External Components
Ultra Small MSOP Package: 14.8mm2

General Description
The HMC400MS8 is a high dynamic range passive MMIC mixer in a plastic surface mount 8 lead Mini Small Outline Package (MSOP) covering 1.7 to 2.2 GHz. Excellent input IP3 performance of +36 dBm for down conversion and +29 dBm for up conversion is provided for 2.5G & 3G GSM/CDMA based UMTS or PCS applications at an LO drive of +17dBm. With a 1dB compression of +21 dBm, the RF port will accept a wide range of input signal levels. Conversion loss is 8.5dB typical and LO isolations are maintained at 22 to 33 dB. This miniature singleended monolithic GaAs FET mixer does not require any external components or bias. The 50 to 300 MHz IF frequency response will satisfy many UMTS/PCS transmit or receive frequency plans confi gured for low side LO. The HMC400MS8 input IP3 performance coupled with its high P1dB rivals traditional active FET mixers while offering a much smaller 14.8mm2 standard IC footprint and no DC bias.

TAG Mixer, MMIC

Trackback :: http://datasheetblog.com/trackback/405

댓글을 달아 주세요 Comment