The MS5541C is the miniature version of MS5535C pressure sensor module. It contains a precision piezoresistive pressure sensor and an improved version of the 16 Bit Micropower Sensor interface IC known from the MS5535C. Compared to the previous version the ESD sensitivity has been improved to 4kV on all pins. In addition to this the MS5541C is from its outer dimensions compatible to the MS54xx series of pressure sensors. It uses an antimagnetic polished stainless steel ring for sealing with O-ring. The sensor provides 16 Bit pressure and temperature data via a 3 wire serial interface that can be easily interfaced with 4 Bit low power microcontrollers. 64 Bit of factory programmed PROM provides calibration data for a highly accurate pressure and temperature calculation. The MS5541C is fully software compatible to the MS5535C and previous versions of MS5541.

*Resolution 1.2 mbar
*Supply voltage 2.2 V to 3.6 V
*Operating current < 5uA
*Standby current < 0.1uA
*-40°C to +85°C
*No external components required

*Diving computers and divers watches
*Mobile water depth measurement systems


댓글을 달아 주세요 Comment

V5 and V7 Series Basic Switches are used for simple or precision on/off, end of limit, presence/absence, pressure, temperature and manual operator interface application needs.

* World-wide package size acceptance
* Current rating ranges from 0.1 A to 25 A
* Wiping contact action
* Temperature range to 177 °C [350 °F]
* Long mechanical life
* Elongated mounting holes for easier, more accurate mounting
* UL/CSA recognized, ENEC (European) approval available
* Choice of actuation, termination and operating characteristics

* Appliances
* Vending machines
* Timing devices
* Office equipment
* Computer/business equipment
* Test instruments
* Medical/dental equipment
* Communications equipment
* HVAC equipment
* Manually operated devices
* Valves
* Gaming equipment
* Pressure switches

댓글을 달아 주세요 Comment

The ADS7884 is a 10-bit, 3-MSPS analog-to-digital converter (ADC), and the ADS7885 is a 8-bit, 3-MSPS ADC.
The devices include a capacitor based SAR A/D converter with inherent sample and hold.
The serial interface in each device is controlled by the CS and SCLK signals for glueless connections with microprocessors and DSPs.
The input signal is sampled with the falling edge of CS, and SCLK is used for conversion and serial data output.
The devices operate from a wide supply range from 2.7V to 5.5V.
The low power consumption of the devices make them suitable for battery-powered applications.
The devices also include a power saving powerdown feature for when the devices are operated at lower conversion speeds.
The high level of the digital input to the device is not limited to device VDD.
This means the digital input can go as high as 5.5V when device supply is 2.7V.
This feature is useful when digital signals are coming from other circuit with different supply levels.
Also this relaxes restriction on power up sequencing.
The ADS7884 and ADS7885 are available in a 6-pin SOT23 package and are specified for operation from –40°C to 125°C.

* 3-MHz Sample Rate Serial Device
* 10-Bit Resolution – ADS7884
* 8-Bit Resolution – ADS7885
* Zero Latency
* 48-MHz Serial Interface
* Supply Range: 2.7 V to 5.5 V
* Low Power Dissipation:
- 6.8 mW at 3-V VDD, 2.5 MSPS
- 15 mw at 5-V VDD, 3 MSPS
* ±0.3 LSB INL, ±0.3 LSB DNL – ADS7884
* ±0.15 LSB INL, ±0.1 LSB DNL – ADS7885
* 61.7 dB SINAD, –81 dB THD – ADS7884
* 49.8 dB SINAD, –68 dB THD – ADS7885
* Unipolar Input Range: 0 V to VDD
* Powerdown Current: 1 μA
* Wide Input Bandwidth: 30 MHz at 3 dB
* 6-Pin SOT23 Package

* Base Band Converters in Radio Communication
* DMroivtoersCurrent/Bus Voltage Sensors in Digital
* Optical Networking (DWDM, MEMS Based Switching)
* Optical Sensors
* Battery Powered Systems
* Medical Instrumentations
* High-Speed Data Acquisition Systems
* High-Speed Closed-Loop Systems


댓글을 달아 주세요 Comment