'Military' related articles 1

  1. 2008/12/16 XQ18V04 - Military 4Mbit ISP Configuration Flash PROM
Xilinx introduces the QPro™ XQ18V04 Military Grade 4Mbit in-system programmable configuration Flash PROM. The XQ18V04 is a 3.3V rewritable PROM that provides a reliable non-volatile method for storing large Xilinx FPGA configuration bitstreams used in systems that
require operation over the full military temperature range.
When the FPGA is in Master Serial mode, it generates a configuration clock that drives the PROM. A short access time after the rising CCLK, data is available on the PROM DATA (D0) pin that is connected to the FPGA DIN pin. The FPGA generates the appropriate number of clock pulses to complete the configuration. When the FPGA is in Slave Serial mode, the PROM and the FPGA are clocked by an external clock.
When the FPGA is in SelectMAP mode (Slave), an external oscillator will generate the configuration clock that drives the PROM and the FPGA. After the rising CCLK edge, data
is available on the PROMs DATA (D0-D7) pins. The data will be clocked into the FPGA on the following rising edge of the CCLK.
Multiple devices can be cascaded by using the CEO output to drive the CE input of the following device. The clock inputs and the DATA outputs of all PROMs in this chain are
interconnected. The XQ18V04 is compatible and can be cascaded with other configuration PROMs such as the XQR1701L and XQR17V16 one-time programmable configuration

*Operating Temperature Range: –55° C to +125°C
*Low-power advanced CMOS FLASH process memory cells immune to static single event upset
*In-system programmable 3.3V PROMs for configuration of Xilinx FPGAs
- Endurance of 20,000 program/erase cycles
*IEEE Std 1149.1 boundary-scan (JTAG) support
*Cascadable for storing longer or multiple bitstreams
*Dual configuration modes
- Serial Slow/Fast configuration (up to 20 MHz)
- Parallel (up to 160 Mbps at 20 MHz)
*5V tolerant I/O pins accept 5V, 3.3V, and 2.5V signals
*3.3V or 2.5V output capability
*Available in plastic VQ44 packaging only
*Design support using the Xilinx Alliance Series™ and Xilinx Foundation Series™ software packages
*JTAG command initiation of standard FPGA configuration

XQV300, XQV600, XQV1000

Trackback :: http://datasheetblog.com/trackback/2110

댓글을 달아 주세요 Comment