General Description
The VHC14 is an advanced high speed CMOS Hex Schmitt Inverter fabricated with silicon gate CMOS technology.
It achieves the high speed operation similar to equivalent Bipolar Schottky TTL while maintaining the CMOS low power dissipation.
Pin configuration and function are the same as the VHC04 but the inputs have hysteresis
between the positive-going and negative-going input thresholds, which are capable of transforming slowly changing input signals into sharply defined, jitter-free output signals, thus providing greater noise margin than conventional inverters.
An input protection circuit ensures that 0V to 7V can be applied to the input pins without regard to the supply voltage.
This device can be used to interface 5V to 3V systems and two supply systems such as battery back up.
This circuit prevents device destruction due to mismatched supply and input voltages.

Features
* High Speed: tPD = 5.5 ns (typ) at VCC = 5V
* Low power dissipation: ICC = 2 mA (Max) at TA = 25°C
* High noise immunity: VNIH = VNIL = 28% VCC (Min)
* Power down protection is provided on all inputs
* Low noise: VOLP = 0.8V (Max)
* Pin and function compatible with 74HC14

74VHC14M
74VHC14SJ
74VHC14MTC
74VHC14N

TAG HEX, Inverter

Trackback :: http://datasheetblog.com/trackback/1461

댓글을 달아 주세요 Comment

General description
The 74AUP1G04 is a high-performance, low-power, low-voltage, Si-gate CMOS device,
superior to most advanced CMOS compatible TTL families.
Schmitt-trigger actio*at all inputs makes the circuit tolerant to slower input rise and fall
times across the entire VCC range from 0.8 V to 3.6 V.
This device ensures a very low static and dynamic power consumptio*across the entire
VCC range from 0.8 V to 3.6 V.
This device is fully specified for partial Power-dow*applications using IOFF.
The IOFF circuitry disables the output, preventing the damaging backflow current through
the device whe*it is powered down.
The 74AUP1G04 provides the single inverting buffer.

 Features
*Wide supply voltage range from 0.8 V to 3.6 V
*High noise immunity
*Complies with JEDEC standards:
*JESD8-12 (0.8 V to 1.3 V)
*JESD8-11 (0.9 V to 1.65 V)
*JESD8-7 (1.2 V to 1.95 V)
*JESD8-5 (1.8 V to 2.7 V)
*JESD8-B (2.7 V to 3.6 V)
*ESD protection:
*HBM JESD22-A114-C Class 3A. Exceeds 5000 V
*MM JESD22-A115-A exceeds 200 V
*CDM JESD22-C101-C exceeds 1000 V
*Low static power consumption; ICC = 0.9 mA (maximum)
*Latch-up performance exceeds 100 mA per JESD 78 Class II
*Inputs accept voltages up to 3.6 V
*Low noise overshoot and undershoot < 10 % of VCC
*IOFF circuitry provides partial Power-dow*mode operation
*Multiple package options
*Specified from -40 °C to +85 °C and -40 °C to +125 °C


74AUP1G04GW
74AUP1G04GM
74AUP1G04GF

Trackback :: http://datasheetblog.com/trackback/907

댓글을 달아 주세요 Comment

Features
* High-Efficiency Single-Stage Power Conversion
* Wide Input Voltage Range: 5V to 25.5V
* Backlight Lamp Ballast and Soft Dimming
* Reduced Number of Required External Components
* Precision Voltage Reference Trimmed to 2%
* ZVS Full-Bridge Topology
* Soft-Start Capability
* PWM Control at Fixed Frequency
* Analog and Burst Dimming Function
* Programmable Striking Frequency
* Open-Lamp Protection
* Open-Lamp Regulation
* 20-Pin SOIC

Description
The FAN7311B provides all the control functions for series parallel resonant converter as well as a pulse width modulation (PWM) controller to develop a supply voltage. Typical operating frequency range is between 30kHz and 250kHz, depending on the cold cathode fluorescent
lamp (CCFL) and the transformer's characteristics.
 The FAN7311B uses a new patent-pending phaseshift control.

Applications
* LCD TV
* LCD Monitor

FAN7311BM FAN7311BMX

Trackback :: http://datasheetblog.com/trackback/586

댓글을 달아 주세요 Comment

FEATURES
·  Single-stage power conversion, input voltage range of 5V to 18V
·  Reduces the number of components and board size by 30% compared with conventional design
·  Supports both floating and grounded secondary designs
·  90% efficiency vs. typical 75% efficiency of conventional designs
·  Internal open-lamp and short-circuit protections
·  Wide dimming range
·  Supports synchronization among multiple inverter modules
·  Reliable 2-winding transformer design, eliminates arcing problems
·  Constant frequency, symmetrical, sinusoidal drive

GENERAL DESCRIPTION
The OZ962 is a unique high-efficiency, CCFL backlight controller. It generates symmetrical, near sinusoidal output voltage and current waveforms for driving a CCFL backlight. The OZ962 operates in a single, constant frequency, pulse-width-modulation (PWM) mode. Typical operating frequency ranges between 30 KHz to 100 KHz, depending on the CCFL and the transformer’s characteristics. Operating in a PWM push-pull manner, the transformer in the OZ962 backlight inverter requires only one primary winding and one secondary winding, with the secondary winding requiring no fold-back treatment. The OZ962 is available in both 16-pin SOIC and TSSOP packages. It is specified over the commercial temperature range: 0 oC to +70 oC.

OZ962R OZ962G

Trackback :: http://datasheetblog.com/trackback/350

댓글을 달아 주세요 Comment

74HCU04 - Hex inverter

Philips 2006/11/01 21:11
FEATURES
· Output capability: standard
· ICC category: SSI

GENERAL DESCRIPTION
The 74HCU04 is a high-speed Si-gate CMOS device and is pin compatible with low power Schottky TTL (LSTTL). It is specified in compliance with JEDEC standard no. 7A.
The 74HCU04 is a general purpose hex inverter. Each of the six inverters is a single stage

APPLICATION INFORMATION
Some applications for the “HCU04” are:
· Linear amplifier
· In crystal oscillator designs
· Astable multivibrator

74HC04 74HCU04 74HCT04 74HCMOS04
TAG Inverter

Trackback :: http://datasheetblog.com/trackback/261

댓글을 달아 주세요 Comment

General Description
The NC7SZ14 is a single Inverter with Schmitt Trigger input from Fairchild’s Ultra High Speed Series of TinyLogic. The device is fabricated with advanced CMOS technology to achieve ultra high speed with high output drive while maintaining low static power dissipation over a very broad VCC operating range. The device is specified to operate over the 1.65V to 5.5V VCC range. The input and output are high impedance when VCC is 0V. Inputs tolerate voltages up to 6V independent of VCC operating voltage.

Features
- Space saving SOT23 or SC70 5-lead package
- Ultra small MicroPak leadless package
- Ultra High Speed; tPD 3.7 ns Typ into 50 pF at 5V VCC
- High Output Drive; ±24 mA at 3V VCC
- Broad VCC Operating Range; 1.65V to 5.5V
- Matches the performance of LCX when operated at 3.3V VCC
- Power down high impedance inputs/output
- Overvoltage Tolerant inputs facilitate 5V to 3V translation
- Patented noise/EMI reduction circuitry implemented

NC7SZ14M5X, NC7SZ14P5X,, NC7SZ14L6X

Trackback :: http://datasheetblog.com/trackback/147

댓글을 달아 주세요 Comment