General Description
The ADC08L060 is a low-power, 8-bit, monolithic analog-todigital converter with an on-chip track-and-hold circuit. Optimized for low cost, low power, small size and ease of use, this
product operates at conversion rates of 10 MSPS to 60 MSPS while consuming just 0.65 mW per MHz of clock frequency, or 39 mW at 60 MSPS. Raising the PD pin puts the ADC08L060 into a Power Down mode where it consumes about 1 mW.
The unique architecture achieves 7.6 Effective Bits. The ADC08L060 is resistant to latch-up and the outputs are shortcircuit proof. The top and bottom of the ADC08L060s reference ladder are available for connections, enabling a wide range of input possibilities. The digital outputs are TTL/ CMOS compatible with a separate output power supply pin to support interfacing with 1.8V to 3V logic. The output coding is straight binary and the digital inputs (CLK and PD) are TTL/ CMOS compatible.
The ADC08L060 is offered in a 24-lead plastic package (TSSOP) and is specified over the industrial temperature range of −40°C to +85°C. An evaluation board is available to assist in the evaluation of the ADC08L060.

Features
* Single-ended input
* Internal sample-and-hold function
* Low voltage (single +3V) operation
* Small package
* Power-down feature

Applications
* Digital Imaging
* Set-top boxes
* Portable Instrumentation
* Communication Systems
* X-ray imaging
* Viterbi decoders

ADC08L060CIMT
ADC08L060CIMTX
ADC08L060EVAL

Trackback :: http://datasheetblog.com/trackback/1332

댓글을 달아 주세요 Comment

DESCRIPTION
The MGFC36V7177A is an internally impedance-matched GaAs power FET especially designed for use in 7.1 ~ 7.7 GHz band amplifiers.The hermetically sealed metal-ceramic package guarantees high reliability.

FEATURES
Class A operation
Internally matched to 50(ohm) system
High output power
P1dB = 4W (TYP.) @ f=7.1~7.7GHz
High power gain
GLP = 9 dB (TYP.) @ f=7.1~7.7GHz
High power added efficiency
P.A.E. = 30 % (TYP.) @ f=7.1~7.7GHz
Low distortion [ item -51 ]
IM3= -45 dBc(TYP.) @Po=25dBm S.C.L.

APPLICATION
item 01 : 7.1~7.7 GHz band power amplifier
item 51 : 7.1~7.7 GHz band digital radio communication

QUALITY GRADE
IG

RECOMMENDED BIAS CONDITIONS
VDS = 10 (V)
ID = 1.2 (A) Refer to Bias Procedure
RG= 100 (ohm)
TAG band, Internal

Trackback :: http://datasheetblog.com/trackback/969

댓글을 달아 주세요 Comment

Features
• Bipolar Hall Effect Latch Sensor
• 3V to 20V DC Operation Voltage
• Built-in Pull-Up Resistor
• 25mA Output Sink Current
• Operating Temperature: C 125 ~ C 40 ° + ° −
• Lead Free Finish/RoHS Compliant for Lead Free products
• Lead Free Package: SIP-3L, SC59-3L
• Green Package: SC59-3L

General Description
AH173 is a single-digital-output Hall-effect sensor with pull-up resistor for high temperature operation. The device includes an on-chip Hall voltage generator for magnetic sensing, an amplifier to amplify Hall voltage, and a comparator to provide switching hysteresis for noise rejection, and an output driver with a pull-up resistor (Rpu). An internal band-gap regulator is used to provide temperature compensated supply voltage for internal circuits and allows a wide operating supply range. While the magnetic flux density (B) is larger than operate point (Bop), the OUT pin turns on (low). If B moves toward release point (Brp), the OUT pin is latched “on” state prior to B < Brp. When B < Brp, the OUT pin goes into “off ” state.

Applications
• Rotor Position Sensing
• Current Switch
• Encoder
• RPM Detection

AH173-P AH173-W  AH173-PL7-A AH173-WL7-A AH173-PG7-A AH173-WG7-A AH173-PLA-A
AH173-WLA-A AH173-PGA-A AH173-WGA-A AH173-PLB-A AH173-WLB-A AH173-PGB-A
AH173-WGB-A AH173-PL7-B AH173-WL7-B AH173-PG7-B AH173-WG7-B AH173-PLA-B
AH173-WLA-B AH173-PGA-B AH173-WGA-B AH173-PLB-B AH173-WLB-B AH173-PGB-B
AH173-WGB-B

Trackback :: http://datasheetblog.com/trackback/548

댓글을 달아 주세요 Comment