General Description
The AAT2848 is a tri-mode charge pump optimized for systems operating with lithium-ion/polymer batteries. The charge pump provides power for both white LED backlight and flash, with an integrated four channel backlight LED current sink plus two channel flash LED current sinks.
Each backlight channel can drive up to 30mA, while each flash current sink/channel can drive up to 300mA (600mA total). Two independent S2Cwire™ (AnalogicTech’s Simple Serial Control™) serial digital interface inputs enable, disable, and set LED current to one of 32 levels for the backlight and to one of 16 levels for the flash, with fullscale current independently set for backlight and flash using external resistors.
The AAT2848 offers a built-in fade-in/out function for linear control of the backlight current during ON/OFF transitions. The fade time is programmable by an external capacitor.
The AAT2848 also offers a built-in flash timeout function as a safety feature associated with the high power flash driver. The safety timer is also programmable via an external capacitor.
The AAT2848 is equipped with built-in short-circuit and over-temperature protection. The soft-start circuitry prevents excessive inrush current at start-up and mode transitions. The AAT2848 is available in a Pb-free, space saving TQFN33-20 package and operates over the -40°C to +85°C ambient temperature range.

Features
*Tri-Mode (1x/1.5x/2x) Charge Pump
*Four 30mA Backlight LED Channels
*Independent S2Cwire Control for Backlight
*32-Level Programmable Backlight Current Control—Linear, Inverting
*Two 300mA Flash LED Channels
*Independent S2Cwire Control for Flash
*16-Level Programmable Flash Current Control—Linear, Inverting
*User-Programmable Full Scale Current for Backlight and Flash
*User-Programmable Fade-In/Fade-Out Function for Backlight
*User-Programmable Safety Timer for Flash LED Protection
*Built-In Thermal Protection
*Automatic Soft-Start
*-40°C to +85°C Temperature Range
*Available in TQFN33-20 Package

Applications
*Camera Enabled Mobile Devices
*Digital Still Cameras
*Multimedia Mobile Phones

AAT2848IDG-T1
TAG Display, Flash

Trackback :: http://datasheetblog.com/trackback/2882

댓글을 달아 주세요 Comment

DESCRIPTION
The HDSP2110S (Red), HDSP2111S (Yellow), HDSP2112S (High Efficiency Red), HDSP2113S (Green), HDSP2114S (High Efficiency Green), and HDSP2115S (Soft Orange) are eight digit, 5x7 dot matrix, alphanumeric Intelligent Display devices. The 0.20 inch high digits are packaged in a rugged, high quality, optically transparent, 0.6 inch lead spacing, 28 pin plastic DIP.
The on-board CMOS has a built-in 128 character ROM. The HDSP211XS also has a user definable character (UDC) feature, which uses a RAM that permits storage of 16 arbitrary characters, symbols or icons that are software-definable by the user. The character ROM itself is mask programmable and easily modified by the manufacturer to provide specified custom characters.
The HDSP211XS is designed for standard microprocessor interface techniques, and is fully TTL compatible. The Clock I/O and Clock Select pins allow the user to cascade multiple display modules.

FEATURES
*Eight 0.200" Dot Matrix Characters in Red, Yellow, High Efficiency Red, Green, High Efficiency Green, or Soft Orange
*Built-in 128 Character ROM, Mask Programmable for Custom Fonts
*Readable from 8 Feet (2.5 meters)
*Built-in Decoders, Multiplexers and Drivers
*Wide Viewing Angle, X Axis ±55° , Y Axis ±65°
*Programmable Features:
–Individual Flashing Character
–Full Display Blinking
–Multi-Level Dimming and Blanking
–Clear Function
–Self Test
*Internal or External Clock
*End Stackable Dual-In-Line Plastic Package
*Read/Write Capability
*16 User Definable Characters

HDSP2110S, HDSP2112S, HDSP2113S, HDSP2114S, HDSP2115S

Trackback :: http://datasheetblog.com/trackback/2511

댓글을 달아 주세요 Comment

Description
The ICL7106 and ICL7107 are high performance,low power 31/ 2 digit A/D converters. Included are seven segment decoders, display drivers, a reference, and a clock.
The ICL7106 is designed to interface with a liquid crystal display (LCD) and includes a multiplexed backplane drive, the ICL7107 will directly drive an instrument size light emitting diode (LED) display.
The ICL7106 and ICL7107 bring together a combination of high accuracy, versatility, and true economy.
True differential inputs and reference are useful in all systems, but give the designer an uncommon advantage when measuring load cells, strain gauges andother bridge type transducers.
Finally he true economy of single power Supply operation ( ICL7106 ), enables a high performance panel meter to be built with the addition of only 10 passive display.

Features
* Guaranteed Zero Reading for 0V input on All Scales
* True Polarity at Zero for Precise Null Detection
* True Differential input and Reference, Direct Display
* Drive
- LCD ICL7106
- LED ICL7107
* Low Noise-Less Than 15 uVp-p
* On Chip Clock and Reference
* Low Power DissipationTypically Less Than 10mW
* No Additional Active Circuits Required
* New Small Outline Surface Mount Package Available

TAG Display

Trackback :: http://datasheetblog.com/trackback/1829

댓글을 달아 주세요 Comment

Description
The Green source color devices are made with Gallium Phosphide Green Light Emitting Diode.

Features
* 0.3 INCH DIGIT HEIGHT.
* EXCELLENT CHARACTER APPEARANCE.
* EASY MOUNTING ON P.C. BOARDS OR SOCKETS.
* I.C. COMPATIBLE.
* MECHANICALLY RUGGED.
* STANDARD :GRAY FACE, WHITE SEGMENT.
* RoHS COMPLIANT
TAG Display

Trackback :: http://datasheetblog.com/trackback/1819

댓글을 달아 주세요 Comment

Description
 The HD61203U is a common signal driver for dot matrix liquid crystal graphic display systems.
It generates the timing signals (switch signal to convert LCD waveform to AC, frame synchronous signal) and supplies them to the column driver to control display.
It provides 64 driver output lines and the impedance is low enough to drive a large screen.
As the HD61203U is produced by a CMOS process, it is fit for use in portable battery-driven equipment utilizing the liquid crystal display’s low power consumption.
The user can easily construct a dot matrix liquid crystal graphic display system by combining the HD61203U and the column (segment) driver HD61202U.

Features
* Dot matrix liquid crystal graphic display common driver with low impedance
* Low impedance: 1.5 kW max
* Internal liquid crystal display driver circuit: 64 circuits
* Internal dynamic display timing generator circuit
* Display duty cycle
* When used with the column driver HD61202U: 1/48, 1/64, 1/96, 1/128
* When used with the controller HD61830: Selectable out of 1/32 to 1/128
* Low power dissipation: During displays: 5 mW
* Power supplies: VCC: 2.7~5.5V
* Power supply voltage for liquid crystal display drive: 8V to 16V
* CMOS process
* 100-pin plastic QFP, 100-pin plastic TQFP, chip

HD61203UFS
HD61203UTE
HCD61203U

Trackback :: http://datasheetblog.com/trackback/1615

댓글을 달아 주세요 Comment

Description
 The TDS.51.. series are 13 mm character seven segment LED displays in a very compact package.
The displays are designed for a viewing distance up to 7 meters and available in four bright colors.
The grey package surface and the evenly lighted untinted segments provide an optimum on-off contrast.
All displays are categorized in luminous intensity groups.
That allows users to assemble displays with uniform appearence.
Typical applications include instruments, panel meters, point-of-sale terminals and household equipment.

Features
* Evenly lighted segments
* Grey package surface
* Untinted segments
* Luminous intensity categorized
* Yellow and green categorized for color
* Wide viewing angle
* Suitable for DC and high peak current

Applications
* Panel meters
* Test- and measure- equipment
* Point-of-sale terminals
* Control units
* TV sets

TDSY516
TDSG515
TDSG516

Trackback :: http://datasheetblog.com/trackback/1547

댓글을 달아 주세요 Comment

Description
The HCMS-29xx series are high performance, easy to use dot matrix displays driven by on-board CMOS ICs. Each display can be directly interfaced with a microprocessor, thus eliminating the need for cumbersome interface components. The serial IC interface allows higher character count information displays with a minimum of data lines. A variety of colors, font heights, and character counts gives designers a wide range of product choices for their
specific applications and the easy to read 5 x 7 pixel format allows the display of uppercase, lower case,
Katakana, and custom user-defined characters. These displays are stackable in the x- and y- directions, making them ideal for high character count displays.

Features
• Easy to use
• Interfaces directly with microprocessors
• 0.15" character height in 4, 8, and 16 (2x8) character packages
• 0.20" character height in 4 and 8 character packages
• Rugged X- and Y-stackable package
• Serial input
• Convenient brightness controls
• Wave solderable
• Offered in five colors
• Low power CMOS technology
• TTL compatible

Applications
• Telecommunications equipment
• Portable data entry devices
• Computer peripherals
• Medical equipment
• Test equipment
• Business machines
• Avionics
• Industrial controls

HCMS-29X5
HCMS-29X2
HCMS-29X4
HCMS-29X1
HCMS-29X3

Trackback :: http://datasheetblog.com/trackback/962

댓글을 달아 주세요 Comment

Features
*0.2INCH DIGIT HEIGHT.
*LOW CURRENT OPERATION.
*EXCELLENT CHARACTER APPEARANCE.
*I.C. COMPATIBLE.
*MECHANICALLY RUGGED.
*GRAY FACE,WHITE SEGMENT.
*PACKAGE : 600PCS / REEL.

Description
The Blue source color devices are made with GaN on SiC Light Emitting Diode.
Static electricity and surge damage the LEDS. It is recommended to use a wrist band or antielectrostatic glove when handling the LEDs.
All devices, equipment and machinery must be electrically grounded.

Trackback :: http://datasheetblog.com/trackback/911

댓글을 달아 주세요 Comment

General Description
The LM2506 device adapts RGB style display interfaces to the Mobile Pixel Link (MPL) Level zero serial link. The LM2506 supports one RGB display at up to 18-bit color depth and 800 X 300 pixels (over 216 Mbps and 13.2 MHz PCLK) is supported. A mode pin configures the device as a Serializer (SER) or Deserializer (DES) so the same chip can be used on both sides of the interface.
The interconnect is reduced from 22 signals to only 3 active signals with the LM2506 chipset easing flex interconnect design, size constraints and cost.
The LM2506 in SER mode resides beside an application, graphics or baseband processor and translates a parallel bus from LVCMOS levels to serial Mobile Pixel Link levels for transmission over a flex cable (or coax) and PCB traces to the DES located near the display module.
When the Power_Down (PD*) input is asserted on the SER, the MDn and MC line drivers are powered down to save current. The DES can be controlled by a separate Power-Down input or via a signal from the SER (PDOUT*).
The LM2506 implements the physical layer of the MPL Level 0 Standard (MPL-0) and a 150 μA IB current (Class 0).

Features
*RGB Display Interface support up to 800 x 300 1⁄2SVGA formats
*MPL-Level 0 Physical Layer using two data and one clock signal
*Low Power Consumption
*Pinout mirroring enables straight through layout with minimal vias
*Level translatio*betwee*host and display
*Auto Power Dow*o*STOP PCLK
*Link power dow*mode reduces quiescent power under < 10 μA
*1.74V to 2.0V core / analog supply voltage range
*1.74V to 3.0V I/O supply voltage range
*−30C to 85C Operating temperature range System Benefits
*Small Interface
*Low Power
*Low EMI
*Intrinsic Level Translation


LM2506GR
LM2506SQ

Trackback :: http://datasheetblog.com/trackback/853

댓글을 달아 주세요 Comment

FEATURES
- 8-bit analog-to-digital converters
- 170 MSPS maximum conversion rate
- Low PLL clock jitter at 170 MSPS
- Automatic gain matching
- Automated offset adjustment
- 2:1 input mux
- Power-down via dedicated pin or serial register
- 4:4:4, 4:2:2, and DDR output format modes
- Variable output drive strength
- Odd/even field detection
- External clock input
- Regenerated Hsync output
- Programmable output high impedance control
- Hsyncs per Vsync counter
- Sync-on-green pulse filter
- Pb-free package

APPLICATIONS
- Advanced TVs
- Plasma display panels
- LCDTV
- HDTV
- RGB graphics processing
- LCD monitors and projectors
- Scan converters

GENERAL DESCRIPTION
 The AD9983A is a complete 8-bit, 170 MSPS, monolithic analog interface optimized for capturing YPbPr video and RGB graphics signals. Its 170 MSPS encode rate capability and full power analog bandwidth of 300 MHz support all HDTV video modes up to 1080p as well as graphics resolutions up to UXGA (1600 x 1200 at 60 Hz).
 The AD9983A includes a 170 MHz triple ADC with an internal reference, a PLL, and programmable gain, offset, and clamp control. The user provides only a 1.8 V power supply and an analog input. Three-state CMOS outputs can be powered from 1.8 V to 3.3 V.
 The AD9983A on-chip PLL generates a sample clock from the tri-level sync (for YPbPr video) or the horizontal sync (for RGB graphics). Sample clock output frequencies range from 10 MHz to 170 MHz. With internal coast generation, the PLL maintains its output frequency in the absence of sync input. A 32-step sampling clock phase adjustment is provided. Output data, sync, and clock phase relationships are maintained.
 The auto-offset feature can be enabled to automatically restore the signal reference levels and to automatically calibrate out any offset differences between the three channels. The auto channel-to-channel gain matching feature can be enabled to minimize any gain mismatches between the three channels. The AD9983A also offers full sync processing for composite sync and sync-on-green applications. A clamp signal is generated internally or may be provided by the user through the CLAMP input pin.
 Fabricated in an advanced CMOS process, the AD9983A is provided in a space-saving 80-lead, Pb-free, LQFP surface-mount plastic package or a 64-lead LFCSP package, and is specified over the 0°C to 70°C temperature range.

AD9983AKSTZ-140 AD9983AKCPZ-140 AD9983AKSTZ-170 AD9983AKCPZ-170

Trackback :: http://datasheetblog.com/trackback/542

댓글을 달아 주세요 Comment