FEATURES
ㅁSyncronous Operation
ㅁFrequency Set By External Clock
ㅁMaximum Input Frequency:
− 1MHz for ADS1206
− 4MHz for ADS1207
ㅁSelectable High-Impedance Buffered Input
ㅁ2% Internal, 2.5V Reference Voltage
ㅁHigh-Current Output Driver
ㅁPower Supply 3.3V or 5V
ㅁLow Power : 3mW (typ)
ㅁAlternate Source for AD7740
ㅁ−40°C to +85°C Operating Temperature Range

APPLICATIONS
ㅁGalvanic Isolation Measurement
ㅁHigh Voltage Measurement
ㅁLow-Cost Analog-to-Digital Conversion
ㅁMotor Control
ㅁIndustrial Process Control
ㅁInstrumentation
ㅁSmart Transmitters
ㅁPortable Instruments

DESCRIPTION
The ADS1206 and ADS1207 are a low-cost, high-performance, synchronous voltage-to-frequency converters (VFC). Both devices can operate from a single 3.0V to 3.6V or 4.5V to 5.5V power supply, consuming only 1mA. The output signal is synchronous with the input clock, CLKIN. The clock input is TTL- and CMOScompatible and the onboard clock generator can also accept an external crystal or resonator. The maximum input clock frequency for the ADS1206 is 1MHz and for the ADS1207 is 4MHz. The clock divider on the ADS1207 scales the input frequency to 2MHZ, which permits the core to operate at the higher rate. The high-impedance input is ideal for direct connection to high-impedance transducers or high-voltage resistive dividers. Counting output pulses over a 4ms period results in an effective 12-bit resolution for the ADS1206 using a 1MHz input clock. For the ADS1207 using a 4MHz input clock, the same result occurs over a 2ms period. Both devices are designed for use in medium-resolution measurements. They are available in an 8-lead VSSOP package.

ADS1207 ADS1206IDGKT ADS1206IDGKR ADS1207IDGKT ADS1207IDGKR
TAG Converter

Trackback :: http://datasheetblog.com/trackback/423

댓글을 달아 주세요 Comment

Features
• 80C48 and 80C80/85 Bus Compatible - No Interfacing Logic Required
• Conversion Time < 100µs
• Easy Interface to Most Microprocessors
• Will Operate in a “Stand Alone” Mode
• Differential Analog Voltage Inputs
• Works with Bandgap Voltage References
• TTL Compatible Inputs and Outputs
• On-Chip Clock Generator
• 0V to 5V Analog Voltage Input Range (Single + 5V Supply)
• No Zero-Adjust Required

Description
The ADC0802 family are CMOS 8-Bit, successive-approximation A/D converters which use a modified potentiometric ladder and are designed to operate with the 8080A control bus via three-state outputs. These converters appear to the processor as memory locations or I/O ports, and hence no interfacing logic is required. The differential analog voltage input has good commonmode- rejection and permits offsetting the analog zero-inputvoltage value. In addition, the voltage reference input can be adjusted to allow encoding any smaller analog voltage span
to the full 8 bits of resolution.

ADC0802LCN ADC0803LCN ADC0804LCN ADC0804LCWM
TAG Converter

Trackback :: http://datasheetblog.com/trackback/235

댓글을 달아 주세요 Comment

Description
The SIL10 series are non-isolated DC/DC converters packaged in a single-in-line footprint giving designers a cost effective solution for conversion from either a 5V or 3.3V input to output
voltages of 0.8V to 3.3V. The SIL10 offers both fixed outputs and wide output trim range which
allows maximum design flexibility and a pathway for future upgrades. Local voltage conversion
by the SIL10 series from existing 5V or 3.3V system voltages eliminates the need for redesign of
existing power architectures when voltage requirements change. The SIL10 is designed for applications that include distributed power, workstations, optical network and wireless applications. Implemented using state of the art surface mount technology and automated
manufacturing techniques, the SIL10 offers compact size and efficiencies of up to 96%.

Features
• Current rating of 10A
• Outputs of between 0.8V to 3.3V - fixed and flexible
• Applications for 5V or 3.3V input POL converters
• Highest power density available today (117W/in3)
• High efficiency - up to 96% achievable on 3.3 Vout
• POL converter that saves board space - vertical or horizontal
versions
• Industry standard footprint
• Remote sense and remote ON/OFF

SIL10-05W3V3-V SIL10-05S3V3-V SIL10-05S2V5-V
TAG Converter

Trackback :: http://datasheetblog.com/trackback/179

댓글을 달아 주세요 Comment

PRODUCT DESCRIPTION
The AD9203 is a monolithic low power, single supply, 10-bit, 40 MSPS analog-to-digital converter, with an on-chip voltage reference. The AD9203 uses a multistage differential pipeline
architecture and guarantees no missing codes over the full operating temperature range. Its input range may be adjusted between 1 V and 2 V p-p.
The AD9203 has an onboard programmable reference. An external reference can also be chosen to suit the dc accuracy and temperature drift requirements of an application.
An external resistor can be used to reduce power consumption when operating at lower sampling rates. This yields power savings for users who do not require the maximum sample rate. This feature is especially useful at sample rates far below 40 MSPS. Excellent performance is still achieved at reduced power. For example, 9.7 ENOB performance may be realized with only 17 mW of power, using a 5 MHz clock.
A single clock input is used to control all internal conversion cycles. The digital output data is presented in straight binary or twos complementary output format by using the DFS pin. An
out-of-range signal (OTR) indicates an overflow condition that can be used with the most significant bit to determine over or under range.
The AD9203 can operate with a supply range from 2.7 V to 3.6 V, attractive for low power operation in high speed portable applications.

FEATURES
- CMOS 10-Bit 40 MSPS Sampling A/D Converter
- Power Dissipation: 74 mW (3 V Supply, 40 MSPS)
                             17 mW (3 V Supply, 5 MSPS)
- Operation Between 2.7 V and 3.6 V Supply
- Differential Nonlinearity: 60.25 LSB
- Power-Down (Standby) Mode, 0.65 mW
- ENOB: 9.55 @ fIN = 20 MHz
- Out-of-Range Indicator
- Adjustable On-Chip Voltage Reference
- IF Undersampling up to fIN = 130 MHz
- Input Range: 1 V to 2 V p-p Differential or Single-Ended
- Adjustable Power Consumption
- Internal Clamp Circuit

AD9203ARU, AD9203-EB
TAG Converter

Trackback :: http://datasheetblog.com/trackback/148

댓글을 달아 주세요 Comment

DESCRIPTION
The SL34063A is a monolithic control circuit containing the primary functions required for DC-to-DC converters. These devices consist of an internal temperature compensated reference, comparator, controlled duty cycle oscillator with an active current limit circuit, driver and high current output switch. This series was specifically designed to be incorporated in Step-Down and Step-Up and Voltage-Inverting applications with a minimum number of external components.

FEATURES
·  Operation from 3.0 V to 40 V Input
·  Low Standby Current
·  Current Limiting
·  Output Switch Current to 1.5 A
·  Output Voltage Adjustable
·  Frequency Operation to 100 kHz
·  Precision 2% Reference

34063AD, 34063AP1

Trackback :: http://datasheetblog.com/trackback/125

댓글을 달아 주세요 Comment

General Description
The LM2672 series of regulators are monolithic integrated circuits built with a LMDMOS process. These regulators provide all the active functions for a step-down (buck) switching regulator, capable of driving a 1A load current with excellent line and load regulation. These devices are available in fixed output voltages of 3.3V, 5.0V, 12V, and an adjustable output version.
Requiring a minimum number of external components, these regulators are simple to use and include patented internal frequency compensation (Patent Nos. 5,382,918 and 5,514,947), fixed frequency oscillator, external shutdown, soft-start, and frequency synchronization.
The LM2672 series operates at a switching frequency of 260 kHz, thus allowing smaller sized filter components than what would be needed with lower frequency switching regulators.
Because of its very high efficiency (>90%), the copper traces on the printed circuit board are the only heat sinking needed.
A family of standard inductors for use with the LM2672 are available from several different manufacturers. This feature greatly simplifies the design of switch-mode power supplies using these advanced ICs. Also included in the datasheet are selector guides for diodes and capacitors designed to work in switch-mode power supplies.
Other features include a guaranteed ±1.5% tolerance on output voltage within specified input voltages and output load conditions, and ±10% on the oscillator frequency. External shutdown is included, featuring typically 50 µA stand-by current. The output switch includes current limiting, as well as thermal shutdown for full protection under fault conditions.
To simplify the LM2672 buck regulator design procedure, there exists computer design software, LM267X Made Simple version 1.0.

Features
  - Efficiency up to 96%
  - Available in SO-8 and 8-pin DIP packages
  - Computer Design Software LM267X Made Simple version 1.0
  - Simple and easy to design with
  - Requires only 5 external components
  - Uses readily available standard inductors
  - 3.3V, 5.0V, 12V, and adjustable output versions
  - Adjustable version output voltage range: 1.21V to 37V
  - ±1.5% max output voltage tolerance over line and load conditions
  - Guaranteed 1A output load current
  - 0.25Ω DMOS Output Switch
  - Wide input voltage range: 8V to 40V
  - 260 kHz fixed frequency internal oscillator
  - TTL shutdown capability, low power standby mode
  - Soft-start and frequency synchronization
  - Thermal shutdown and current limit protection

LM2672M-3.3, LM2672M-5.0, LM2672M-12 or LM2672M-ADJ
LM2672N-3.3, LM2672N-5.0, LM2672N-12 or LM2672N-ADJ

Trackback :: http://datasheetblog.com/trackback/123

댓글을 달아 주세요 Comment

Description
The MC34063A Series is a monolithic control circuit containing the
primary functions required for DC–to–DC converters. These devices
consist of an internal temperature compensated reference, comparator,
controlled duty cycle oscillator with an active current limit circuit,
driver and high current output switch. This series was specifically
designed to be incorporated in Step–Down and Step–Up and
Voltage–Inverting applications with a minimum number of external
components. Refer to Application Notes AN920A/D and AN954/D
for additional design information.

Feature
• Operation from 3.0 V to 40 V Input
• Low Standby Current
• Current Limiting
• Output Switch Current to 1.5 A
• Output Voltage Adjustable
• Frequency Operation to 100 kHz
• Precision 2% Reference

MC34063A, MC33063A, MC33063AD, MC33063ADR2, MC33063AP1, MC33063AVD, MC33063AVDR2, MC33063AVP, MC34063AD, MC34063ADR2, MC34063AP1, MC34063BD, MC34063BDR2, MC34063AM, MC34063AMEL, MC34063AML1, MC34063AML2, MC34063AMR1, MC34063AMR2

Trackback :: http://datasheetblog.com/trackback/105

댓글을 달아 주세요 Comment

General Description
The AP1519 is monolithic IC designed for a step-down DC/DC converter, and own the ability of
driving a 2A load without additional transistor. It saves board space. The external shutdown function can be controlled by logic level and then come into standby mode. The internal compensation makes feedback control having good line and load regulation without external design. Regarding protected function, thermal shutdown is to prevent over temperature operating from damage, and current limit is against over current operating of the output switch. If current limit function occurs and VFB is down below 0.5V, the switching frequency will be reduced. The AP1519 series operates at a switching frequency of 300KHz thus allows smaller sized filter components than what would be needed with lower frequency switching regulators. Other features include a guaranteed +4% tolerance on output voltage under specified input voltage and output load conditions, and +15% on the oscillator frequency. The chips are available in a standard 8-lead SOP-8 package.

Features
- Adjustable version output voltage range, 0.8V to 18V+4%
- 300KHz +15% fixed switching frequency
- Voltage mode non-synchronous PWM control
- Thermal-shutdown and current-limit protection
- ON/OFF shutdown control input
- Operating voltage can be up to 22V
- Output load current: 2A
- SOP-8L Pb-Free packages
- Low power standby mode
- Built-in switching transistor on chip

AP1519S, AP1519SA
TAG Converter

Trackback :: http://datasheetblog.com/trackback/94

댓글을 달아 주세요 Comment

If you can to find, please send me
I hope you help me.
TAG Converter

Trackback :: http://datasheetblog.com/trackback/7

댓글을 달아 주세요 Comment