Construction
*Polar tantalum capacitors with solid electrolyte
*Conventional TaMnO2 technology
*Flame-retardant plastic case (UL 94 V-0)
*Optionally tinned or gold-plated terminals

Features
*Meets AEC-Q200 requirements
*Ultra-high volumetric efficiency
*Excellent solderability
*Stable temperature and frequency characteristics
*Low leakage current, low dissipation factor
*Low self-inductance
*High resistance to shock and vibration
*Suitable for use without series resistor
*Lead-free and material content compatible with RoHS

Applications
*Automotive electronics (e.g. safety applications e.g airbags, ABS, motor management)
*Measuring and control engineering (e.g. voltage regulators)
*DC/DC converters

B45196L0335+10, B45196L0475+10, B45196L0685+10, B45196L0106+20,
B45196L0156+20, B45196L0226+10, B45196L0226+20, B45196L0226+30,
B45196L0336+20, B45196L0336+30, B45196L0476+20, B45196L0476+30,

FEATURES
KEMET’s Open Mode Ceramic Surface Mount Capacitor is designed to significantly minimize the probability of a low IR or Short Circuit Condition when forced to failure in a board flex situation. This reduces the potential for causing catastrophic failures. This product is RoHS Compliant.

Applications
• Input side filtering (power plane/bus)
• High current applications (battery line)
• Circuits that cannot be fused to open when short circuits occur due to flex cracks

Markets
• Automotive
- All applications connected directly to the battery
- Conversion to 42V power system
• Power Conversion
- Raw power input side filtering

Applications
* High-reliability equipment in automotive power electronics, e.g. integrated starter alternator
* Applications with highest ripple current load at high frequencies

Features
* Outstanding ripple current capability
* Optimized for high frequencies
* Optimized design for bottom cooling
* Low profile
* Vibration resistance 30 g upon request
* Stud mounting upon request
* Shelf life up to 10 years
* All-welded construction ensures reliable electrical contact

Construction
* Charge-discharge proof, polar
* Aluminum case without insulating sleeve (for bottom cooling)
* Poles with screw terminal connections
* Mounting with ring clips or clamps

FEATURES
■ 0.1μF External Charge Pump Capacitors
■ 120kbps Data Rate
■ Standard SOIC and SSOP Packages
■ Multiple Drivers and Receivers
■ Single 5V Supply Operation
■ 1μA Shutdown Mode
■ WakeUp Feature in Shutdown Mode
■ Tri–State Receiver Outputs
■ Meets All RS-232 and V.28 Specifications
■ Improved Driver Output Capacity for Mouse Applications
■ ±10kV ESD Protection*

DESCRIPTION
The SP200 Series are multi–channel RS-232 line transceivers in a variety of configurations to
fit most communication needs. All models in this Series feature low–power CMOS construction
and Sipex patented (5,306,954) on-board charge pump circuitry to generate the ±10V RS-232
voltage levels, using 0.1μF charge pump capacitors to save board space and reduce circuit cost.
The SP200, SP206, SP207B, SP211 and SP213 models feature a low–power shutdown mode,
which reduces power supply drain to 1μA. A WakeUp function keeps the receivers active in the
shutdown mode.


SP206B
SP207B
SP211

Typical applications
- Test and measurement equipment
- Laser, ultrasonic, X-ray, microwave

Climatic
- Max. operating temperature: 85 °C
- Climatic category (IEC 60068-1): 40/085/21

Construction
- Dielectric: polyethylene terephthalate (polyester, PET)
- Cylindrical winding
- In tubular plastic case
- Face ends sealed with epoxy resin

Terminals
- Central axial wire leads, lead-free tinned

Marking
Manufacturer's logo, style (MKT), series number, rated capacitance (coded), capacitance tolerance (code letter), rated DC voltage, date of manufacture (coded)

Delivery mode
Bulk (untaped)

B32237A0253M000
B32237A1502M000
B32237A1103M000
B32237J2252M000
B32237J2502M000
B32237B2103M000
B32237J2253M000

INTRODUCTION
SAF Series molded Tantalum Chip Capacitors with Built-in fuse, are developed to provide safety to the PCB by opening the circuit in case of abnormal voltage or current.

FEATURES:
• HIGH HEAT RESISTANCE MAKES IT SUITABLE FOR ALL TYPES OF SOLDERING
• FUSE CHARACTERISTICS DESIGNED TO PREVENT FIRE OR SMOKE
• B, C & D CASE SIZES DESIGNED TO OPEN IN<100 SEC AT 1.5A OR<5SEC AT 5A. D & F CASE SIZES OPEN IN <5 SEC AT 5A. (REFERENCE GRAPH G1 FOR FUSING TIME PATTERN.)
• LOW ESR OF <2 OHMS AT 1MHZ LOW INDUCTANCE OF 5nH AT 200 MHz.
• COMPONENTS MEET IEC SPEC QC 300801/US0001 AND EIA J RC- 3813 & JIS C
5102. REEL PACKING STDS - EIA J RC-1009B /EIA 481/IEC 286-3. EPOXY MOLDED COMPONENTS WITH CONSISTENT DIMENSIONS AND SURFACE FINISH.
•ENGINEERED FOR AUTOMATIC ONSERTION.
•COMPATIBLE WITH ALL POPULAR HIGH SPEED ASSEMBLY MACHINES.

GENERAL SPECIFICATIONS
•CAPACITANCE RANGE: 1.0µF to 68µF.
•VOLTAGE RANGE: 10VDC to 50VDC.
•CAPACITANCE TOLERANCE: ±20%(M), ±10%(K), ( ±5%(J) - UPON REQUEST)
•TEMPERATURE RANGE: -55 to +125°C with DERATING ABOVE 85°C
•ENVIRONMENTAL CLASSIFICATION: 55/125/56(IEC68-2)
•DISSIPATION FACTOR: 0.1µF to 1µF 4% Max 1.5 µF to 22 µF 5% MAX, 33µF 8%
•Max. LEAKAGE CURRENT: NOT MORE THAN 0.01CV µA or 0.5 µA WHICHEVER
•IS GREATER FAILURE RATE: 1% PER 1000 HRS.

SAFB475M10R202 SAFC156M10R501 SAFD2226M10R501 SAFD2336M10R501 SAFD336M10R501
SAFD2476M10R501 SAFF476M10R401 SAFF686M10R401 SAFB335M16R202 SAFC106M16R501
SAFD2156M16R501 SAFD2226M16R501 SAFD226M16R501 SAFD336M16R501 SAFF336M16R401
SAFF476M16R401 SAFB225M20R202 SAFC685M20R501 SAFD2106M20R501 SAFD2156M20R501
SAFD156M20R501 SAFD226M20R501 SAFF226M20R401 SAFF336M20R401

* Miniture, light weight
* Suitable for mobile devices
* Lead-free plating terminal
* No polarity

■ Quick Reference
The design and specifications are subject to change without prior notice. Before ordering or using, please check the latest technical specifications. For more detail information regarding temperature characteristic code and packaging style code, please check product destination.

MCH155A0R5C MCH155AR75C MCH155A010C MCH155A1R1C MCH155A1R2C MCH155A1R3C
MCH155A1R5C MCH155A1R6C MCH155A1R8C MCH155A020C MCH155A110J MCH155A120J
MCH155A130J MCH155A150J MCH155A160J MCH155A180J MCH155A200J MCH155A220J
MCH155A240J MCH155A270J

General Description
The MAX3222/MAX3232/MAX3237/MAX3241 transceivers have a proprietary low-dropout transmitter output stage enabling true RS-232 performance from a 3.0V to 5.5V supply with a dual charge pump. The devices require only four small 0.1µF external chargepump capacitors. The MAX3222, MAX3232, and MAX3241 are guaranteed to run at data rates of 120kbps while maintaining RS-232 output levels. The MAX3237 is guaranteed to run at data rates of 250kbps
in the normal operating mode and 1Mbps in the MegaBaud™ operating mode, while maintaining RS-232 output levels. The MAX3222/MAX3232 have 2 receivers and 2 drivers. The MAX3222 features a 1µA shutdown mode that reduces power consumption and extends battery life in portable systems. Its receivers remain active in shutdown mode, allowing external devices such as modems to be monitored using only 1µA supply current. The MAX3222 and MAX3232 are pin, package, and functionally compatible with the industry-standard MAX242 and MAX232, respectively. The MAX3241 is a complete serial port (3 drivers/ 5 receivers) designed for notebook and subnotebook computers. The MAX3237 (5 drivers/3 receivers) is ideal for fast modem applications. Both these devices feature a shutdown mode in which all receivers can remain active while using only 1µA supply current. Receivers R1 (MAX3237/MAX3241) and R2 (MAX3241) have extra outputs in addition to their standard outputs. These extra outputs are always active, allowing external devices such as a modem to be monitored without forward biasing the protection diodes in circuitry that may have VCC completely removed.
The MAX3222, MAX3237, and MAX3241 are available in space-saving TSSOP and SSOP packages.

Features
ㅁ Low Supply Current:
  300µA (MAX3222/MAX3232/MAX3241)
  500µA (MAX3237)
ㅁ Guaranteed Data Rate:
  120kbps (MAX3222/MAX3232/MAX3241)
   250kbps (MAX3237—Normal Operation)
  1Mbps (MAX3237—MegaBaud Operation)
ㅁ 1µA Low-Power Shutdown with Receivers Active (MAX3222/MAX3237/MAX3241)
ㅁ Flow-Through Pinout (MAX3237)
ㅁ Meets EIA/TIA-232 Specifications Down to 3.0V
ㅁ Guaranteed Mouse Driveability (MAX3241)
ㅁ Pin Compatible with Industry-Standard MAX232 (MAX3232)
  Pin Compatible with Industry-Standard MAX242 (MAX3222)
ㅁ Guaranteed Slew Rate:
  6V/µs (MAX3222/MAX3232/MAX3237/MAX3241)
  24V/µs (MAX3237—MegaBaud Operation)

MAX3222CUP MAX3222CAP MAX3222CWN MAX3222CPN