Description
The NCV7341 CAN transceiver is the interface between a controller area network (CAN) protocol controller and the physical bus and may be used in both 12 V and 24 V systems. The transceiver provides differential transmit capability to the bus and differential receive capability to the CAN controller.
Due to the wide common−mode voltage range of the receiver inputs, the NCV7341 is able to reach outstanding levels of electromagnetic susceptibility (EMS). Similarly, extremely low electromagnetic emission (EME) is achieved by the excellent matching of the output signals.
The NCV7341 is a new addition to the ON Semiconductor CAN high−speed transceiver family and offers the following additional features:

Features
*Ideal Passive Behavior when Supply Voltage is Removed
*Separate VIO Supply for Digital Interface Allowing Communication to CAN Controllers and Microcontrollers with Different Supply Levels
*Fully Compatible with the ISO 11898 Standard
*High Speed (up to 1 Mb)
*Very Low Electromagnetic Emission (EME)
*VSPLIT Voltage Source for Stabilizing the Recessive Bus Level if Split Termination is Used (Further Improvement of EME)
*Differential Receiver with High Common−Mode Range for Electromagnetic Immunity (EMI)
*Up to 110 Nodes can be Connected in Function of the Bus Topology
*Transmit Data (TxD) Dominant Time−out Function
*Bus Pins Protected Against Transients in Automotive Environments
*Bus Pins and Pin VSPLIT Short−Circuit Proof to Battery and Ground
*Thermally Protected
*NCV Prefix for Automotive and Other Applications Requiring Site and Control Changes
*These are Pb−Free Devices*

Typical Applications
*Automotive
*Industrial Networks

NCV7341D21G, NCV7341D21R2G

Trackback :: http://datasheetblog.com/trackback/2500

댓글을 달아 주세요 Comment

General Description
The AMIS-42671 CAN transceiver with autobaud is the interface between a controller area network (CAN) protocol controller and the physical bus. It may be used in both 12V and 24V systems. The transceiver provides differential transmit capability to the bus and differential receive capability to the CAN controller. Due to the wide common-mode voltage range of the receiver inputs, the AMIS-42671 is able to reach outstanding levels of electromagnetic susceptibility (EMS). Similarly, extremely low electromagnetic emission (EME) is achieved by the excellent matching of the output signals.
The AMIS-42671 is primarily intended for industrial network applications where long network lengths are mandatory. Examples are elevators, in-building networks, process control and trains. To cope with the long bus delay the communication speed needs to be low. AMIS-42671 allows low transmit data rates down 10 Kbit/s or lower. The autobaud function allows the CAN controller to determine the incoming baud rate without influencing the CAN communication on the bus.

Key Features
*Fully compatible with the ISO 11898-2 standard
*Autobaud function
*Wide range of bus communication speed (0 up to 1 Mbit/s)
*Allows low transmit data rate in networks exceeding 1 km
*Ideally suited for 12V and 24V industrial and automotive applications
*Low electromagnetic emission (EME) common-mode choke is no longer required
*Differential receiver with wide common-mode range (+/- 35V) for high EMS
*No disturbance of the bus lines with an un-powered node
*Thermal protection
*Bus pins protected against transients
*Silent mode in which the transmitter is disabled
*Short circuit proof to supply voltage and ground
*Logic level inputs compatible with 3.3V devices
*ESD protection for CAN bus at ± 8 kV

0ICAB-001-XTD, 0ICAB-001-XTP

Trackback :: http://datasheetblog.com/trackback/2141

댓글을 달아 주세요 Comment

General Description
The AMIS-42675 CAN transceiver is the interface between a controller area network (CAN) protocol controller and the physical bus. It may be used in both 12V and 24V systems. The transceiver provides differential transmit capability to the bus and differential receive capability to the CAN controller.
The AMIS-42675 is the low power member of the CAN high-speed transceiver family and offers the following additional features:
• Ideal passive behaviour when supply voltage is removed
• Wake-up over bus
• Extremely low current standby mode
Due to the wide common-mode voltage range of the receiver inputs, the AMIS-42675 is able to reach outstanding levels of electro-magnetic susceptibility (EMS). Similarly, extremely low electromagnetic emission (EME) is achieved by the excellent matching of the output signals.
The AMIS-42675 is the industrial version of the AMIS-42665 and primarily for applications where long network lengths are mandatory. Examples are elevators, in-building networks, process control and trains. To cope with the long bus delay the communication speed needs to be low. AMIS-42675 allows low transmit data rates down 10 Kbit/s or lower.

Key Features
*Compatible with the ISO 11898 standard (ISO 11898-2, ISO 11898-5 and SAE J2284)
*Wide range of bus communication speed (0 up to 1 Mbit/s)
*Ideally suited for 12V and 24V industrial and automotive applications
*Allows low transmit data rate in networks exceeding 1 km
*Extremely low current standby mode with wake-up via the bus
*Low electromagnetic emission (EME): common-mode choke is no longer required
*Differential receiver with wide common-mode range (+/- 35V) for high EMS
*Voltage source via VSPLIT pin for stabilizing the recessive bus level (further EMC improvement)
*No disturbance of the bus lines with an un-powered node
*Thermal protection
*Bus pins protected against transients
*Power down mode in which the transmitter is disabled
*Bus and VSPLIT pins short circuit proof to supply voltage and ground
*Logic level inputs compatible with 3.3V devices
*At least 110 nodes can be connected to the same bus

0ICAA-001-XTD, 0ICAA-001-XTP, AMIS 42675AGA

Trackback :: http://datasheetblog.com/trackback/2010

댓글을 달아 주세요 Comment