DESCRIPTION
This registered bus exchanger is built using advanced dual metal CMOS technology. The ALVCH16270 is used in applications in which data must be transferred from a narrow high-speed bus to a wide lower-frequency bus. This device provides synchronous data exchange between the two ports. Data is stored in the internal registers on the low-to-high transition of the clock CLK) input when the appropriate clock-enable (CLKEN) inputs are low. The select (SEL) line selects 1B or 2B data for the A outputs. For data transfer in the A-to-B direction, a two-stage pipeline is provided in the A-to-1B path, with a single storage register in the A-to-2B path. Proper control of the CLKENA input allows two sequential 12-bit words to be presented synchronously as a 24-bit word on the B-port. Data flow is controlled by the active-low output enables (OEA and OEB). The control terminals are registered to synchronize the bus-direction
changes with CLK.
The ALVCH16270 has been designed with a ±24mA output driver. This driver is capable of driving a moderate to heavy load while maintaining speed performance.
The ALVCH16270 has “bus-hold” which retains the inputs’ last state whenever the input goes to a high impedance. This prevents floating inputs and eliminates the need for pull-up/down resistors.

FEATURES
*0.5 MICRON CMOS Technology
*Typical tSK(o) (Output Skew) < 250ps
*ESD > 2000V per MIL-STD-883, Method 3015; > 200V using machine model (C = 200pF, R = 0)
*VCC = 3.3V ± 0.3V, Normal Range
*VCC = 2.7V to 3.6V, Extended Range
*VCC = 2.5V ± 0.2V
*CMOS power levels (0.4μ W typ. static)
*Rail-to-Rail output swing for increased noise margin
*Available in SSOP, TSSOP, and TVSOP packages

DRIVE FEATURES
*High Output Drivers: ±24mA
*Suitable for heavy loads

APPLICATIONS
*3.3V high speed systems
*3.3V and lower voltage computing systems

IDT74ALVCH16270PV, IDT74ALVCH16270PA, IDT74ALVCH16270PF

Trackback :: http://datasheetblog.com/trackback/2342

댓글을 달아 주세요 Comment