The XC6222 series is a highly accurate, low noise, high ripple rejection, low dropout, and low power consumption high speed CMOS voltage regulator. The series consists of a voltage reference, an error amplifier, a driver transistor, a current limiter, a thermal protection circuit, a reverse current protection circuit and a phase compensation circuit.
The CE function enables the entire circuit to be placed in a stand-by state by inputting a low level signal to the CE pin. In this stand-by mode, the electric charge at the output capacitor (CL) will be discharged by the internal auto-discharge switch, and as a result the VOUT pin will quickly return to the VSS level.
Over-current protection and thermal protection circuits are integrated. The protection circuit starts to operate when either output current reaches the current limit level or junction temperature reaches the temperature limit. With the reverse current protection function, the reverse current flow is prohibited when VOUT voltage is higher than VIN voltage. The device is optimized for use in backup power circuits.

*Dropout Voltage : 120mV @IOUT=300mA(VOUT=3.0V)
*Operating Voltage Range : 1.7V ~ 6.0V
*Output Voltages : 0.8V~5.0V (0.05V increments)
*Accuracy : +1% (VOUT>2.0V), +0.02V (VOUT≦2.0V)
*Low Power Consumption : 100μA (VOUT=3.0V)
*Stand-by Current : Less than 0.1μA
*High Ripple Rejection : 65dB @ 1kHz
*Operating Temperature : -40℃~+85℃
*Low ESR Capacitor : Ceramic capacitor
*Environmentally Friendly : EU RoHS Compliant, Pb Free
*Packages : USP-6C, SOT-25, SOT-89-5

*USB Products
*CD/DVD/HDD drives
*Mobile phones
*Portable game consoles
*Camera modules
*Electronic dictionaries

XC6222A081ER-G, XC6222B081ER-G, XC6222C081ER-G

Trackback ::

댓글을 달아 주세요 Comment