* USB-IF Hi-Speed certified to the Universal Serial Bus Specification Rev 2.0
* Interface compliant with the ULPI Specification revision 1.1 in 8-bit mode
* Industry standard UTMI+ Low Pin Interface (ULPI) Converts 54 UTMI+ signals into a standard 12 pin Link controller interface
* 54.7mA Unconfigured Current (typical) - ideal for bus powered applications
* 83uA suspend current (typical) - ideal for battery powered applications
* Latch-Up performance exceeds 150 mA per EIA/JESD 78, Class II
* ESD protection levels of ±8kV HBM without external protection devices
* Integrated protection to withstand IEC61000-4-2 ESD tests (±8kV contact and ±15kV air) per 3rd party test facility
* Supports FS pre-amble for FS hubs with a LS device attached (UTMI+ Level 3)
* Supports HS SOF and LS keep-alive pulse
* Includes full support for the optional On-The-Go (OTG) protocol detailed in the On-The-Go
Supplement Revision 1.0a specification
* Supports the OTG Host Negotiation Protocol (HNP) and Session Request Protocol (SRP)
* Allows host to turn VBUS off to conserve battery power in OTG applications
* Supports OTG monitoring of VBUS levels with internal comparators. Includes support for an external VBUS or fault monitor.
* Low Latency Hi-Speed Receiver (43 Hi-Speed clocks Max) allows use of legacy UTMI Links with a ULPI wrapper
* Integrated Pull-up resistor on STP for interface protection allows a reliable Link/PHY start-up with slow Links (software configured for low power)
* Internal 1.8 volt regulators allow operation from a single 3.3 volt supply
* Internal short circuit protection of ID, DP and DM lines to VBUS or ground
* Integrated 24MHz Crystal Oscillator supports either crystal operation or 24MHz external clock input
* Internal PLL for 480MHz Hi-Speed USB operation
* Industrial Operating Temperature -40°C to +85°C
* 32 pin, QFN lead-free RoHS Compliant package (5 x 5 x 0.90 mm height)

The USB3300 is the ideal companion to any ASIC, SoC or FPGA solution designed with a ULPI Hi-Speed USB host, peripheral or OTG core.
The USB3300 is well suited for:
* Cell Phones
* PDAs
* MP3 Players
* Scanners
* External Hard Drives
* Digital Still and Video Cameras
* Portable Media Players
* Printers


Trackback ::

댓글을 달아 주세요 Comment