GENERAL DESCRIPTION
The XC6801 series is a constant-current/constant-voltage linear charger IC for single cell lithium-ion batteries. The XC6801 includes a reference voltage source, battery voltage monitor, driver transistor, constant-current/constant-voltage charge circuit, overheat protection circuit and phase compensation circuit. The battery charge termination voltage is internally set to 4.2V ±0.7% and the trickle charge voltage and accuracy is 2.9V ±3%. In trickle charge mode, a safe battery charge is possible because approximately only 1/10 of the full charge current is supplied to the battery. As it is possible to select a highly accurate charge current of either 100mA (MAX.) for L level input to the LIM pin or 500mA (MAX.) for H level, the series is ideal for applications where the charge is from USB. The series’ charge status output pin, /CHG pin, is capable of checking the IC’s charging state via connection to an external LED.

FEATURES
*Operating Voltage Range : 4.25V ~ 6.0V
*Charge Current(externally set) : 100mA (MAX.) @ LIM pin=L, 500mA (MAX.) @ LIM pin=H
*Charge Termination Voltage : 4.2V ±0.7%
*Trickle Charge Voltage : 2.9V ±3%
*Supply Current (Stand-by) : 12μA (TYP.)
*Packages : SOT-89-5, SOT-25, USP-6C
*Constant-current/constant-voltage operation
*with thermal shutdown
*Automatic recharge
*Charge status output pin
*Soft-start function (Inrush limit current)

APPLICATIONS
*USB charge applications
*Charging docks, charging cradles
*MP3 players, portable audio players
*Cellular phones, PDAs
*Bluetooth headsets

XC6801A421PR-G, XC6801A421MR-G, XC6801A421ER-G

GENERAL DESCRIPTION
The XC6222 series is a highly accurate, low noise, high ripple rejection, low dropout, and low power consumption high speed CMOS voltage regulator. The series consists of a voltage reference, an error amplifier, a driver transistor, a current limiter, a thermal protection circuit, a reverse current protection circuit and a phase compensation circuit.
The CE function enables the entire circuit to be placed in a stand-by state by inputting a low level signal to the CE pin. In this stand-by mode, the electric charge at the output capacitor (CL) will be discharged by the internal auto-discharge switch, and as a result the VOUT pin will quickly return to the VSS level.
Over-current protection and thermal protection circuits are integrated. The protection circuit starts to operate when either output current reaches the current limit level or junction temperature reaches the temperature limit. With the reverse current protection function, the reverse current flow is prohibited when VOUT voltage is higher than VIN voltage. The device is optimized for use in backup power circuits.

FEATURES
*Dropout Voltage : 120mV @IOUT=300mA(VOUT=3.0V)
*Operating Voltage Range : 1.7V ~ 6.0V
*Output Voltages : 0.8V~5.0V (0.05V increments)
*Accuracy : +1% (VOUT＞2.0V), +0.02V (VOUT≦2.0V)
*Low Power Consumption : 100μA (VOUT=3.0V)
*Stand-by Current : Less than 0.1μA
*High Ripple Rejection : 65dB @ 1kHz
*Operating Temperature : -40℃~+85℃
*Low ESR Capacitor : Ceramic capacitor
*Environmentally Friendly : EU RoHS Compliant, Pb Free
*Packages : USP-6C, SOT-25, SOT-89-5

APPLICATIONS
*USB Products
*CD/DVD/HDD drives
*Mobile phones
*Portable game consoles
*Camera modules
*Electronic dictionaries

XC6222A081ER-G, XC6222B081ER-G, XC6222C081ER-G

GENERAL DESCRIPTION
The XC6405 series are precise, low noise, high speed, high current, positive voltage low dropout regulators with built-in voltage detector. They are fabricated using Torex’s CMOS process. Performance features of the series includes high ripple rejection and low dropout voltage, and the series features a voltage reference, an error amplifier, a current limiter and a phase compensation circuit plus a driver transistor.
Detect voltage is selectable in 100mV increments within the range of 0.9V to 5.5V and the LDO output voltage is selectable within a range of 0.9V to 5.1V, also in 100mV increments.
The series is also compatible with low ESR ceramic capacitors which give added output stability. This stability can be maintained even during load fluctuations due to the excellent transient response of the series. The current limiter's foldback circuit also operates as a short circuit protection for the output current limiter and the output pin. The series provides options to the user to select from a variety of circuit features, such as detector monitoring, detector output logic, CE and EN pin input logic, internal pull-up / down resistance, and power ready. The IC's internal regulator circuit can be placed in stand-by mode via the EN function (XC6405 A to C series). The whole IC can be put in to stand-by mode via the CE function with the XC6405D series (semi-custom). In the stand-by mode, power consumption is greatly reduced. The XC6405 A and B series features the toggle operation function. The regulator output can be OFF when the XC6405B series detects voltage (semi-custom). The XC6405E series can monitor another power source by using the VSEN pin (semi-custom).
The XC6405F series can delay the detector output: the delay time can be controlled by the use of an external capacitor (semi-custom).

FEATURES
*Maximum Output Current : More than 500mA (600mA limit), (2.5V≦VROUT≦4.9V)
*Dropout Voltage : 200mV @ 100mA, 400mV @ 200mA
*Operating Voltage Range : 2.0V ~ 6.0V
*VR Setting Output Voltage : 0.9V~ 5.1V (±2%)
*Detect Voltage Setting Range : 0.9V ~ 5.5V (±2%), More than 2.0V (VIN sensing)
*VR.VD Temperature Coefficient : ±100ppm/℃ (TYP.)
*Low Power Consumption : 90μA (TYP.)
*High Ripple Rejection : 65dB (@10kHz)
*Operational Temperature : - 40 ~ 85℃
*Low ESR Capacitor Compatible Highly Accurate : ±2%
*Ultra Small Packages : SOT-25 (SOT-23-5), SOT-89-5

APPLICATIONS
*CD-ROM, CD-R/RW drive
*DVD drive
*HVD drive
*Cameras, Video recorders
*Portable AV equipment
*Battery powered equipment

XC6405CH80MR, XC6405CE81MR, XC6405DE82MR, XC6405DE83MR

GENERAL DESCRIPTION
The XC6225 series is a high accuracy, low noise, and low dropout CMOS LDO regulator. The series includes a reference voltage source, an error amplifier, a driver transistor, a current limiter, and a phase compensation circuit.
The CE function enables the entire circuit to be turned off by a low level input signal to the CE pin. In this stand-by state, the XC6225B series can discharge the electric charge stored at the output capacitor through the internal auto-discharge switch, and as a result the VOUT pin quickly returns to the VSS level. The output stabilization capacitor (CL) is also compatible with low ESR ceramic capacitors. Output voltage is selectable in 0.05V increments within a range of 0.8V~5.0V. The current limit fold-back circuit works as a short circuit protection as well as the output current limiter. The series achieves a fast response with only 25μA of low power consumption. The current limit is set to 50mA (TYP.) so that the device is optimized to protect the circuit from over-current. It is ideally suited for applications requiring 30 mA or less.
A small USP-4 package makes high density mounting possible.

FEATURES
*Output Current : 30mA <50mA (TYP.) Limit>
*Dropout Voltage : 70mV@ IOUT=30mA, VOUT=3.2V
*Operating Voltage Range : 2.5V ~ 6.0V
*Output Voltage Range : 0.8V~5.0V (0.05V increments)
*Accuracy : +2% (VOUT>1.5V) +0.03V (VOUT≦1.45V)
*Low Power Consumption : 25μA (TYP.)
*Stand-by Current : Less than 0.1μA
*High Ripple Rejection : 70dB @ 1kHz
*Operating Temperature Range : -40℃~+85℃
*Output Capacitor : 1.0μF ceramic capacitor
*CL High-Speed Auto-Discharge (XC6225B)
*Low Output Noise Packages : USP-4, SOT-25, SSOT-24 (under development)

APPLICATIONS
*Cellular phones
*Cordless phones, Wireless communication equipment
*Portable games
*Cameras, VCRs
*Portable AV equipment
*PDAs

XC6225A082GR-G, XC6225B082GR-G, XC6225A092GR-G, XC6225B092GR-G

GENERAL DESCRIPTION
The XC6701 series are positive voltage regulator ICs manufactured using CMOS process with 28V of operation voltage.
The series consists of a voltage reference, an error amplifier, a current limiter, a thermal shutdown circuit and a phase compensation circuit plus a driver transistor.
The output voltage is selectable in 0.1V increments within the range of 1.8V to 18V which fixed by laser trimming technologies. The output stabilization capacitor (CL) is also compatible with low ESR ceramic capacitors.
The over current protection circuit and the thermal shutdown circuit are built-in. These two protection circuits will operate when the output current reaches current limit level or the junction temperature reaches temperature limit level.
The CE function enables the output to be turned off and the IC becomes a stand-by mode resulting in greatly reduced power consumption. Packages are selectable depending on the applications from SOT-25, SOT-89, SOT-89-5, USP-6C, SOT-223, and TO-252.

FEATURES
*Max Output Current : More than 150mA (200mA limit) (VIN=VOUT(T)+3.0V)
*Dropout Voltage : 300mV@IOUT=20mA
*Input Voltage Range : 2.0V~28.0V
*Output Voltage Range : 1.8V~18.0V (100mV increments)
*High Accuracy :±2%
*Low Power Consumption : 50μA (VOUT(T)=5.0Ｖ）
*Stand-by Current : Less than 0.1μA
*High Ripple Rejection : 50dB@1kHz
*Operating Temperature : -40℃~+85℃
*Low ESR Capacitor : Ceramic Capacitor Compatible (Internal Phase Compensation)
*Small Packages : SOT-25, SOT-89, SOT-89-5, USP-6C, SOT-223, TO-252

APPLICATIONS
*Car audio, Car navigation systems
*Note book computers, PDAs
*Home appliances
*Audio visuals, Digital cameras, Video cameras
*Cordless phones, Wireless communication

XC6701B182MR, XC6701D182MR, XC6701B2MR, XC6701D2MR

GENERAL DESCRIPTION
The XCM406 series is a high current, dual LDO regulator in an ultra small USP-12B01 package which measures just 2.8mm x 2.8mm. The IC is basically two XC6210 high speed CMOS LDOs which are precise, low noise, high current, regulators consisting of a voltage reference, an error amplifier, a current limiter and phase compensation circuit plus a driver transistor. The low ON resistance of the built-in driver transistor means that batteries can be used to a minimal input-output voltage differential and can therefore be used for a longer time. The series can be used with low ESR ceramic capacitors and output voltages are selectable in 0.1V increments within a range of 0.8V to 5.0V per channel. The fold-back current limit circuit also operates as the output current limiter and the output pin protector.
The IC can be placed in stand-by mode via the CE function so that power consumption is greatly reduced.

FEATURES
*Maximum Output Current : ≧700mA (TYP.: 800mA limit) (1.6V<VOUT(T) <5.0V)
*Dropout Voltage : 50mV@lout=100mA
*Operating Voltage Range : 1.5V ~ 6.0V
*Output Voltage Setting Range : 0.8V ~ 5.0V (0.1V increments)
*Accuracy : + 2%
*Low Power Consumption : 35μA (TYP.)
*High Ripple Rejection : 60dB @ 1kHz
*Operating Temperature Range : - 40 OC ~ 85 OC
*Package : USP-12B01

APPLICATIONS
*Mobile phone
*Bluetooth equipment
*Portable AV equipment
*Portable gaming equipment

XCM406AA01DR, XCM406AB01DR

GENERAL DESCRIPTION
The XP132A1275SR is a P-channel Power MOSFET with low on-state resistance and ultra high-speed switching characteristics.
Because high-speed switching is possible, the IC can be efficiently set thereby saving energy.
The small SOP-8 package makes high density mounting possible.

FEATURES
Low On-State Resistance :
- Rds(on)=0.075Ω (Vgs=-4.5V)
- Rds(on)=0.115Ω (Vgs=-2.5V)
Ultra High-Speed Switching Driving Voltage : -2.5V
P-Channel Power MOSFET DMOS Structure Package : SOP-8

APPLICATIONS
*Notebook PCs
*Cellular and portable phones
*On-board power supplies
*Li-ion battery systems

FEATURES
*Forward Voltage : VF=0.71V (TYP.)
*Forward Current : IF(AV)=100mA
*Repetitive Peak Reverse Voltage : VRM=30V

APPLICATIONS
*Low Current Rectification

GENERAL DESCRIPTION
The XC61F series are highly accurate, low power consumption voltage detectors, manufactured using CMOS and laser trimming technologies. A delay circuit is built-in to each detector.
Detect voltage is extremely accurate with minimal temperature drift.
Both CMOS and N-channel open drain output configurations are available.
Since the delay circuit is built-in, peripherals are unnecessary and high density mounting is possible.

FEATURES
*Highly Accurate : ± 2%
*Low Power Consumption : 1.0μA(TYP.)[ VIN=2.0V ]
*Detect Voltage Range : 1.6V ~ 6.0V in 100mV increments
*Operating Voltage Range : 0.7V ~ 10.0V
*Detect Voltage Temperature Characteristics :±100ppm/℃(TYP.)
*Built-In Delay Circuit : ① 1ms ~ 50ms
                                 ② 50ms ~ 200ms
                                 ③ 80ms ~ 400ms
*Output Configuration :N-channel open drain or CMOS
*Small Packages : SOT-23 (250mW)
                         : SOT-89 (500mW)
                         : TO-92 (300mW)
*No parts are available with an accuracy of ± 1%

APPLICATIONS
*Microprocessor reset circuitry
*Memory battery back-up circuits
*Power-on reset circuits
*Power failure detection
*System battery life and charge voltage monitors
*Delay circuitry

XC61FC1612MR, XC61FN1612MR, XC61FC1642MR, XC61FN1642MR, XC61FC1652MR, XC61FN1652MR, XC61FC1612PR, XC61FN1612PR, XC61FC1642PR, XC61FN1642PR, XC61FC1652PR, XC61FN1652PR, XC61FC1612TR, XC61FN1612TR, XC61FC1642TR, XC61FN1642TR, XC61FC1652TR, XC61FN1652TR, XC61FC1612LR, XC61FN1612LR, XC61FC1642LR, XC61FN1642LR, XC61FC1652LR, XC61FN1652LR, XC61FC1612ML, XC61FN1612ML, XC61FC1642ML, XC61FN1642ML, XC61FC1652ML, XC61FN1652ML, XC61FC1612PL, XC61FN1612PL, XC61FC1642PL, XC61FN1642PL, XC61FC1652PL, XC61FN1652PL, XC61FC1612TL, XC61FN1612TL, XC61FC1642TL, XC61FN1642TL, XC61FC1652TL, XC61FN1652TL, XC61FC1612LL, XC61FN1612LL, XC61FC1642LL, XC61FN1642LL, XC61FC1652LL, XC61FN1652LL, XC61FC1612MH, XC61FN1612MH, XC61FC1642MH, XC61FN1642MH, XC61FC1652MH, XC61FN1652MH, XC61FC1612PH, XC61FN1612PH, XC61FC1642PH, XC61FN1642PH, XC61FC1652PH, XC61FN1652PH, XC61FC1612TH, XC61FN1612TH, XC61FC1642TH, XC61FN1642TH, XC61FC1652TH, XC61FN1652TH, XC61FC1612LH, XC61FN1612LH, XC61FC1642LH, XC61FN1642LH, XC61FC1652LH, XC61FN1652LH, XC61FC1612MB, XC61FN1612MB, XC61FC1642MB, XC61FN1642MB, XC61FC1652MB, XC61FN1652MB, XC61FC1612PB, XC61FN1612PB, XC61FC1642PB, XC61FN1642PB, XC61FC1652PB, XC61FN1652PB, XC61FC1612TB, XC61FN1612TB, XC61FC1642TB, XC61FN1642TB, XC61FC1652TB, XC61FN1652TB, XC61FC1612LB, XC61FN1612LB, XC61FC1642LB, XC61FN1642LB, XC61FC1652LB ,XC61FN1652LB

GENERAL DESCRIPTION
 The XC9128/XC9129 series are synchronous step-up DC/DC converters with a 0.2Ω (TYP.) N-channel driver transistor and a synchronous 0.2Ω (TYP.) P-channel switching transistor built-in.
A highly efficient and stable current can be supplied up to 1.0A by reducing ON resistance of the built-in transistors.
With a high switching frequency of 1.2MHz, a small inductor is selectable making the series ideally suited for applications requiring low profile or space saving solutions.
With the MODE pin, the series provides mode selection of PWM control or PFM/PWM automatic switching control.
In the PWM/PFM automatic switching mode, the series switches from PWM to PFM to reduce switching loss when load current is small.
When load current is large, the series switches automatically to the PWM mode so that high\ efficiency is achievable over a wide range of load conditions.
The series also provides small output ripple from light to large loads by using the built-in circuit which enables the smooth transition between PWM and PFM.
When a voltage higher than the input voltage is applied to the output during shut-down, the input and the output become isolated making it possible for the IC to work in parallel with the likes of an AC adaptor.

FEATURES
* High Efficiency, Large Current Step-Up Converter
* Output Current : 150mA＠VOUT=3.3V, VIN=0.9V
                          50 mA＠VOUT=3.3V, VIN=1.8V
* Input Voltage Range : 0.8V~6.0V
* Output Voltage Setting  : 1.8V~5.3V (Externally set)
* Range Set up freely with a reference voltage supply of 0.45V (±0.01V) & external components
* Oscillation Frequency : 1.2MHz (Fixed oscillation frequency accuracy ±15%)
* Input Current : 1.0A
* Maximum Current Limit : 1.2A (MIN.), 2.0A (MAX.)
* Control : PWM, PWM/PFM control externally selectable
* High Speed :100mV @ VOUT=3.3V
* Transient Response VIN=1.8V, IOUT=10mA→100mA
* Protection Circuits : Thermal shutdown
                             : Integral latch method (Over current limit)
* Soft-Start Time : 5ms (TYP.) internally set
* Ceramic Capacitor Compatible
* Adaptor Enable Function
* Packages : MSOP-10, USP-10B, SOP-8
* Flag Output (FO) : Open-drain output

APPLICATIONS
* Digital audio equipment
* Digital cameras, Video equipment
* Computer Mice
* Various multi-function power supplies using alkali cells (1 to 3 cells), nickel hydride batteries, or single lithium cells

XC9129