Product Description
Sirenza Microdevices’ STA-5063Z is a general purpose class A linear amplifier which utilizes InGaP GaAs Heterojunction Bipolar Transistor (HBT) amplifier housed in a low-cost surface-mountable plastic package. This product is specifically designed as a driver amplifier for WLAN 802.11a and 5.8GHz ISM band and 3.3-3.8GHz fixed wireless applications. It can run from a fixed 3.0-3.6V supply with its on chip active bias network which includes a power up and down control. On-chip impedance matching circuitry provides a 50Ω nominal RF input and output impedance. Its high linearity makes it an ideal choice for multicarrier and digital applications. Housed in an industry standard SOT-363 package, it has no blind solder joints and designed for low cost. This product is offered in a RoHS Compliant and Green package with matte tin finish, designated by the “Z” package suffix.
Product Features
*Linear Class A Performance
*P1dB = 17.5dBm @ 3.5GHz
*P1dB = 15dBm @ 5.9GHz
*IP3 = 30dBm @ 3.5GHz
*IP3 = 27dBm @ 5.9GHz
*Power up/down control < 1μs
*Active Bias controlled
*Robust Class 1C ESD rating
Applications
*Driver stage for 802.11a Access Points
*Wimax 802.16 Driver stage
*Low Power 5.8GHz ISM Output stage
*Fixed Wireless, UNII driver stage
GENERAL DESCRIPTION
The ML2726 is a fully integrated 2.0Mbps frequency shift keyed (FSK) transceiver that operates in the unlicensed 2.4GHz ISM frequency band. The device has been optimized for digital cordless telephone applications and includes all the frequency generation, receive and transmit functions. Automatically adjusted filters eliminate mechanical tuning. Closed loop modulation eliminates frequency drift and permits practically unlimited TX duration. The transmitter generates a 3dBm FSK output signal.
The 2.0Mbps data rate permits data spreading, such as Direct Sequence Spread Spectrum (DSSS) modulation, which improves range. The dual conversion Low-IF receiver has all of the sensitivity and selectivity advantages of a traditional super-heterodyne without requiring costly, bulky external filters, while providing the integration advantages of direct conversion.
The phase locked loop (PLL) synthesizer is completely integrated, including the voltage controlled oscillator (VCO), tuning circuits, and VCO resonator. This allows the ML2726 to be used in frequency hopped spread spectrum (FHSS) applications.
The ML2726 contains internal voltage regulation. It also contains PLL and transmitter configuration registers. The device can be placed in a low power standby mode for current sensitive applications. It is packaged in a “Green” Pb-Free 32TQFP.
FEATURES
*Complete 2.4GHz FSK Transceiver
-High data rate (2.048 Mbps)
--80dBm sensitivity @ 0.1% BER (typ)
-3dBm Output Power (differential, typ)
*Closed Loop TX Modulation
*Low IF Receiver: No external IF filters required.
*Fully Integrated frequency synthesizer:
-No external resonator required.
*Sigma-Delta Fractional-N two-port modulator
*Automatic Filter Alignment
-No manufacturing adjustments required.
*No external data slicer components required
*Control outputs correctly sequence and control PA
*3-wire control interface
*Analog RSSI output
APPLICATIONS
*2.4GHz FSK Data Transceivers
-Digital Cordless Telephones
-Wireless PC Peripherals
-Wireless Game Controllers
-Wireless Streaming Media
ML2726DH, ML2726DH-T
Product Description
Sirenza Microdevices’ SUF-6000 is a high gain broadband 2-stage amplifier covering 2-16 GHz for wideband communication and general purpose applications. This pHEMT FET-based amplifier uses a patented self-bias Darlington topology featuring a gain and temperature compensating active bias network that operates from a single 5V supply. Its compact size make it ideal for high-density multi-chip module applications.
Product Features
*Broadband Performance
*High Gain = 17.4 dB @ 14 GHz
*P1dB = 12.0 dBm @ 14 GHz
*IP3 = 24.9 dBm @ 14 GHz
*5V Operation, No Dropping Resistor
*Low Gain Variation vs. Temperature
*Patented Thermal Design
*Patented Self-Bias Darlington Circuit
Applications
*Broadband Communications
*Test Instrumentation
*Military & Space
*LO and IF Mixer Applications
*High IP3 RF Driver Applications
Product Description
Sirenza Microdevices’ SPA-1218 is a high efficiency GaAs Heterojunction Bipolar Transistor (HBT) amplifier housed in a low-cost surface-mountable plastic package. These HBT amplifiers are fabricated using molecular beam epitaxial growth technology which produces reliable and consistent performance from wafer to wafer and lot to lot.
This product is specifically designed for use as a driver amplifier for infrastructure equipment in the 1960 MHz PCS band. Its high linearity makes it an ideal choice for multi-carrier and digital applications.
Product Features
*High Linearity Performance:
-+21.3 dBm IS-95 Channel Power at -55 dBc ACP
-+48 dBm OIP3 Typ.
*On-chip Active Bias Control
*Patented High Reliability GaAs HBT Technology
*Surface-Mountable Plastic Package
Applications
*PCS Systems
*Multi-Carrier Applications
Product Description
Sirenza Microdevices’ SZM-3166Z is a high linearity class AB Heterojunction Bipolar Transistor (HBT) amplifier housed in a low-cost surface-mountable plastic Q-FlexN multi-chip module package. This HBT amplifier is made with InGaP on GaAs device technology and fabricated with MOCVD for an ideal combination of low cost and high reliability.
This product is specifically designed for 802.16 customer premise equipment (CPE) terminals in the 3.3-3.6 GHz bands. It can run from a 3V to 5.2V supply. The external output match and bias adjustability allows load line optimization for other applications covering 3.5-3.8GHz. It features an output power detector, on/off power control and high RF overdrive robustness.
A 20dB step attenuator feature can be utilized by swtiching the second stage Power up/down control. This product features a RoHS compliant and Green package with matte tin finish, designated by the ‘Z’ suffix.
Product Features
*P1dB =35dBm @ 5.2V
*Three Stages of Gain: 35dB
*802.11g 54Mb/s Class AB Performance
*Pout = 27dBm @ 2.5% EVM, Vcc 5.2V,900mA
*Active Bias with Adjustable Current
*On-chip Output Power Detector
*Low Thermal Resistance
*Power up/down control < 1μs
*Attenuator Step 20dB @ Vpc2 = 0V
*Class 1C ESD Rating
Applications
*802.16 WiMAX Driver or Output Stage
*Fixed Wireless, WLL
*CPE Terminal Applications
SZM-3166Z, SZM-3166Z-EVB1
Product Description
Sirenza Microdevices’ SZM-2166Z is a high linearity class AB Heterojunction Bipolar Transistor (HBT) amplifier housed in a low-cost surface-mountable plastic Q-FlexN multi-chip module package. This HBT amplifier is made with InGaP on GaAs device technology and fabricated with MOCVD for an ideal combination of low cost and high reliability.
This product is specifically designed for 802.16 customer premise equipment (CPE) terminals in the 2.3-2.7 GHz bands. It can run from a 3V to 6V supply. The external output match and bias adjustability allows load line optimization for other applications or over narrower bands. It features an output power detector, on/off power control and high RF overdrive robustness. A 20dB step attenuator feature can be utilized by switching the second stage Power up/down control. This product features a RoHS compliant and Green package with matte tin finish, designated by the ‘Z’ suffix.
Product Features
*P1dB = 35dBm @ 6V
*Three Stages of Gain: 37dB
*802.11g 54Mb/s Class AB Performance
*Pout = 27dBm @ 2.5% EVM, Vcc 6V, 878mA
*Active Bias with Adjustable Current
*On-chip Output Power Detector
*Low Thermal Resistance
*Power up/down control < 1μs
*Attenuator step 20dB @ Vpc2 = 0V
Applications
*802.16 WiMAX Driver or Output Stage
*802.11b/g WLAN, WiFi
*CPE Terminal Applications
SZM-2166Z-EVB1, SZM-2166Z-EVB2, SZM-2166Z-EVB3
Product Description
Sirenza Microdevices’ XD010-51S-D4F 15W power module is a robust 2-stage Class A/AB amplifier module is a driver stage in many 900 MHz applications. The power transistors are fabricated using Sirenza's latest, high performance LDMOS process. This unit operates from a single voltage supply and has internal temperature compensation of the bias voltage to ensure stable performance over the full temperature range. It is a drop-in, no-tune solution for medium power applications requiring high efficiency, excellent linearity, and unit-to-unit repeatability. It is internally matched to 50 ohms.
Product Features
*Available in RoHS compliant packaging
*50 W RF impedance
*15W Output P1dB
*Single Supply Operation : Nominally 28V
*High Gain: 32 dB at 915 MHz
*High Efficiency: 30% at 915 MHz
*Robust 8000V ESD (HBM), Class 3B
*XeMOS II LDMOS FETS
*Temperature Compensation
Applications
*RFID
*Point to Multipoint data radio systems
XD010-51S-D4FY
Product Description
Sirenza Microdevices’ STA-5063 is a general purpose class A linear amplifier which utilizes InGaP GaAs Heterojunction Bipolar Transistor (HBT) amplifier housed in a low-cost surface-
mountable plastic package. This product is specifically designed as a driver amplifier for WLAN 802.11a and 5.8GHz ISM band and 3.3-3.8GHz fixed wireless applications. It can run from a fixed 3.0-3.6V supply with its on chip active bias network which includes a power up and down control. On-chip impedance matching circuitry provides a 50Ω nominal RF input and output impedance. Its high linearity makes it an ideal choice for multicarrier and digital applications. Housed in an industry standard SOT-363 package, it has no blind solder joints and designed for low cost.
Product Features
*Linear Class A Performance
*P1dB = 17.5dBm @ 3.5GHz
*P1dB = 15dBm @ 5.9GHz
*IP3 = 30dBm @ 3.5GHz
*IP3 = 27dBm @ 5.9GHz
*Power up/down control < 1μs
*Active Bias controlled
*Robust Class 1C ESD rating
Applications
*Driver stage for 802.11a Access Points
*Wimax 802.16 Driver stage
*Low Power 5.8GHz ISM Output stage
*Fixed Wireless, UNII driver stage
STA-5063
Product Description
The SGL-0622 is a low power, high gain, fully matched LNA designed for 0.1 - 4GHz operation. This LNA is designed for low power, 2.7 to 3.6V battery operation. This amplifer is fully matched and requires only 4-5 external components to achieve 28.5 dB gain at 1.575 GHz and a noise figure of 1.5dB. This RFIC is fabricated using Silicon Germanium technology.
The matte tin finish on Sirenza’s lead-free “Z” package is applied using a post annealing process to mitigate tin whisker formation and is RoHS compliant per EU Directive 2002/95. The package body is manufactured with green molding compounds that contain no antimony trioxide or halogenated fire retardants.
Product Features
*Lead Free, RoHS Compliant & Green Package
*High Gain and Low Noise, 28.5dB and 1.5dB respectively @ 1575MHz
*Low Power Consumption, 9mA @ 3.3V
*Fully Matched LNA, only 4-5 external components
*Operates from 2.7 to 3.6V
*Small Package: 2x2 QFN
*High input overdrive capability, +18dBm
Applications
*High Gain GPS Receivers
*ISM & WiMAX LNAs
Product Description
Consumer products, such as Set-Top boxes, PVR’s, Home Gateways, and Cable Modems, often require a technique for “splitting” the incoming RF CATV signal, to perform various functions, such as picture-inpicture, VOIP, data, and video recording.
Sirenza Microdevices’ CGA-0116 is a high performance 3- output broadband CATV active splitter-amplifier, designed for operation at 5V. It offers flat gain, high isolation, high IP2, and low power consumption.
This RFIC uses the latest Silicon Germanium Heterostructure Bipolar Transistor (SiGe HBT) process featuring 2 micron emitters.
The matte tin finish on Sirenza’s lead-free package utilizes a post annealing process to mitigate tin whisker formation and is RoHS compliant per EU directive 2002/95. This package is also manufactured with green molding compounds that contain no antimony trioxide nor halogenated fire retardants.
Product Features
• Available in Lead Free, RoHS compliant, and Green packaging
• Broad Frequency Band: 50 to 870 MHz
• Flat Gain Response: < ±0.5 dB Variance
• Internally Matched to 75 Ω
• High Isolation between Output Ports: >35 dB
• High IP2: >149 dBμV
• Single Voltage Supply
• Patent Pending
Applications
• Set-top Box
• Cable Modem
• PVR
CGA-0116 CGA-0116Z
