Description
GP1S74PJ000F is a standard, phototransistor output, transmissive photointerrupter with opposing emitter and detector in a case, providing non-contact sensing. For this family of devices, the emitter and detector are inserted in a case, and a 3-pin connector is included to allow remote-mount or off-board designs.

Features
*Transmissive with phototransistor output
*Highlights
-Special position hooks compatible with 3 different plate thicknesses (1.0, 1.2, 1.6mm)
-Snap insertion
*Key Parameters
-Gap Width : 5mm
-Slit Width (detector side): 0.5mm
-Package : 17×12.8×8mm (without connector and hooks)
-Connector : Tyco Electronics AMP K.K. (PN : 292133-3)
*Lead free and RoHS directive compliant

Applications
*General purpose detection of object presence or motion.
*Example : PPC, FAX, Printer

Description
GP1L53VJ000F is a standard, darlington phototransistor output, transmissive photointerrupter with opposing emitter and detector in a case, providing non-contact sensing. For this family of devices, the emitter and detector are inserted in a case, resulting in a through-hole design.

Features
*Transmissive with darlington phototransistor output
*Highlights :
-Verical Slit for alternate motion detection
*Key Parameters :
-Gap Width : 5mm
-Slit Width (detector side): 0.5mm
-Package : 13.7×10×5.2mm
*Lead free and RoHS directive compliant

Applications
*General purpose detection of object presence or motion.
*Example : Printer, FAX, Optical storage unit

Description
GP2L24J0000F is a compact-package, darlington phototransistor output, reflective photointerrupter, with emitter and detector facing the same direction in a molding that provides non-contact sensing. The compact package series is a result of unique technology, combing transfer and injection molding, that also blocks visible light to minimize false detection.

Features
*Refl ective with Darlington Phototransistor Output
*Highlights : Compact Size
*Key Parameters
-Optimal Sensing Distance : 0.7mm
-Package : 4×3×1.7mm
-Visible light cut resin to prevent
*Lead free and RoHS directive compliant

Applications
*Detection of object presence or motion.
*Example : printer, optical storage

GP2L24J0000F, GP2L24BJ000F, GP2L24CJ000F, GP2L24ABJ00F, GP2L24BCJ00F

DESCRIPTION
The SHARP GP2W0110YPS/GP2W0114YPS are low-power, short-range infrared transceiver modules. They meet the Mobile Communication Low Power Option within the IrDA Specification for the 20 cm communication range. When operating at lower supply voltages, these units provide a reliable interface between logic and IR signals. Applications include through-air, serial, half-duplex IR wireless data links at rates up to 115 kbit/s and the devices are designed to satisfy the IrDA Physical Layer Specifications.
The SHARP GP2W0110YPS/GP2W0114YPS infrared transceiver modules contain a high speed, high efficiency, low power consumption AlGaAs LED, silicon PIN photodiode, and the low power driven bipolar integrated circuit. The IC contains a LED driver circuit and a receiver that provides the Rx output supporting 2.4 kbit/s to 115.2 kbit/s IrDA signals. They meet the IrDA Low Power Option Communication Standard link distance of 0.2 m with low power devices and 0.3 m with standard devices.
The GP2W0110YPS/GP2W0114YPS include a constant-current source in the LED driver circuit that eliminates the need for an external current limiting resistor in the LED circuit.
The IrDA Low Power Option Standard is most suitable for telecommunication products and mobile terminals, such as cellular phones, paging devices, and PDA-cellular combined multimedia devices. The transceiver modules provide wireless data link capability for cellular phones and pagers, PDAs, or any other IrDA application already on the market.
The transceiver modules’ receiver electronics operate at voltages from 2.0 V through 3.6 V without any performance degradation. The split-voltage supply allows the LED voltage to come from a separate supply. An example is in cell phones where the LED may operate from the battery and the receiver and logic section is supplied from a regulated supply at a lower voltage.
This provides manufacturers with the advantage of an energy saving design in any application field, with alternatives for supply voltage and flexibility for other components. The GP2W0110YPS/GP2W0114YPS transceiver modules have a built-in 0.1 μA Shutdown mode for those applications that are very conscious about current consumption. Additionally, the GP2W0110YPS/GP2W0114YPS have a tri-state output, which allow their use in applications where one port connection may be connected to more than one device.
The included shield is appropriate in applications where Electro-Magnetic Interference (EMI) is a concern. Infrared energy is immune to EMI, but the receiving PIN photodiode is somewhat sensitive to EMI. This is the case in all IR communication devices.

FEATURES
*IrDA Low Power Option Compatibility for Telecommunication and Mobile Terminals
*Industry Low Volume Package Design for a Low Power Transceiver:
–7.6(W) × 2.65(D) × 2.0(H) mm, 40.28 mm3
*Low Power Consumption with Built-in Shut-Down Mode 0.2 μA (TYP.)
*Low and Wide Range Operating Voltage:
–VDD = 2.0 V to 3.6 V, VLEDA = 2.0 V to 6.0 V
*Soldering Reflow Capable
*SMD Lead-less Package Design Provides Flexibility with either Vertical Mount or Horizontal Mount to PCBs
*Replaces GP2W0102YP, GP2W0104YP, and GP2W0106YP
*Added Features include Tri-state Output and Splitvoltage Supply Capability
*Fully Compatible with Agilent HSDL 3201
*TOP View Version: GP2W0114YPS

APPLICATIONS
*Telecommunication Products
–Cellular Phones
–Pagers
–Smart Phones
*Mobile Products
–PDAs
–Electronic Wallets
–Mini-Notebook PCs
*Imaging Products
–Portable Printers
–Portable Text Scanners

GP2W0114YPS

Description
PC923L0NSZ Series contains a LED optically coupled to an OPIC chip.
It is packaged in a 8 pin DIP, available in SMT gullwing lead form option.
Input-output isolation voltage(rms) is 5.0 kV, High speed response (tPHL, tPLH : MAX. 0.5 μs).

Features
*8 pin DIP package
*Double transfer mold package (Ideal for Flow Soldering)
*Built-in direct drive circuit for MOSFET / IGBT drive (IO1P, IO2P : 0.6 A)
*High speed response (tPHL, tPLH : MAX. 0.5 μs)
*Wide operating supply voltage range (VCC=15 to 30 V)
*High noise immunity due to high instantaneous common mode rejection voltage (CMH : MIN. −15kV/μs, CML : MIN. 15kV/μs)
*High isolation voltage between input and output (Viso(rms) : 5.0 kV)

Agency approvals/Compliance
*Recognized by UL1577 (Double protection isolation), file No. E64380 (as model No. PC923L)
*Approved by VDE (VDE0884) (as an option), file No. 87446 (as model No. PC923L)
*Package resin : UL flammability grade (94V-0)

Applications
*IGBT/MOSFET gate drive for inverter control

PC923L0NSZ, PC923L0YSZ, PC923L0YIZ, PC923L0NIZ, PC923L0NIP, PC923L0YIP

DESCRIPTION
The LZ34B1B is a 1/4-type (4.5 mm) solid-state color image sensor that consists of PN photodiodes and CMOS (Complementary Metal Oxide Semiconductor) devices. The sensor further includes a timing generator (TG), a correlated double sampling (CDS) circuit, an auto gain control (AGC) circuit and an analog-to-digital converter (ADC) circuit. With approximately 350 000 pixels (703 horizontal x 499 vertical), the sensor provides a stable digital color image with extremely low power consumption.

FEATURES
*Progressive scan
*Square pixel
*Compatible with VGA standard
*Number of image pixels : 655 (H) x 493 (V)
*Number of optical black pixels
–Horizontal : 24 front and 24 rear
–Vertical : 3 front and 3 rear
*Pixel pitch : 5.6 μm (H) x 5.6 μm (V)
*R, G, and B primary color mosaic filters
*Image inversion function (horizontally and/or vertically)
*Available for two types of power save mode
–AGC and AD circuits become power-off with serial data
–All circuits become power-off with STBY pin
*Monitoring mode
*Analog output and 8-bit digital output
*Variable gain control (3 to 30 dB)
*Variable electronic focal plane shutter (1/15 to 1/7 875 s)
*Single +2.8 V power supply
*Package : 36-pin LCC (N-LCC036-S425B)

DESCRIPTION
The LH1594/LH1595 are LCD drivers with a built-in character ROM suitable for driving small scale dotmatrix LCD panels, and which are capable of being directly connected to the bus line of a microcomputer. The 8-bit parallel or serial data transferred from a microcomputer is used to
generate LCD drive signals for displaying characters. Incorporating a character ROM which has font characters configured in the format of 5 x 8 dots and a character RAM which allows the user to define characters, the LH1594/LH1595 provide a higher freedom of display. Since the LH1594/LH1595 have 80 output pins for a segment drive circuit and 17 output pins for a common drive circuit in a single chip, a display system for 16 characters x 2 lines can be implemented easily. The LH1594/LH1595 enable an LCD system for battery-operated, handcarrying information equipment by securing lower power consumption and wider operating voltage
range.

FEATURES
*Built-in CGROM : 240 characters(5 x 8 x 240 = 9 600 bits)
*Built-in CGRAM : 8 characters(5 x 8 x 8 = 320 bits)
*Built-in SEGRAM : 80 segments(16 x 7 = 112 bits)
*Built-in display data RAM : 32 characters(32 x 8 = 256 bits)
*Format of font character : 5 x 8 dots including 1 dot which also serves to display a cursor
*General 8-bit MPU interface : Possible to directly connect 80-family or 68-family MPU to bus line
*Possible to make serial interface (I2C BUS* format is for LH1594)
* Ratio of display duty cycle : 1/8, 1/9, 1/16 or 1/17 (selectable by command)

LH1595

Features
*Compliant with IrDA1.0
*Integrated package of transmitter/receiver. (9.21×3.76×height 2.71mm)
*General purpose
*Low dissipation current due to shut-down function (Dissipation current at shut-down mode:Max. 1.0μA)
*Soldering reflow type
*Shield type

Applications
*Cellular phones, PHS
*Personal information tools

Features
* Maximum switching current: 3.5A
* Built-in ON/OFF control function
* Built-in soft start function to suppress overshoot of output voltage in power on sequence or ON/OFF control sequence
* Built-in oscillation circuit (Oscillation frequency: TYP. 150kHz)
* Built-in overheat,overcurrent protection functions
* TO-220 package
* Variable output voltage (Output variable range: Vref to 35V/–Vref to –30V) [Possible to select step-down output/inversing output according to external connection circuit]
* PQ1CG3032FZH: Zigzag forming
- PQ1CG3032RZH: Self-stand forming
* RoHS directive compliant

Applications
* Color TV
* Digital OA equipment
* Facsimiles,printers and OA equipment
* Personal computers and amusement equipment

PQ1CG3032RZH

DESCRIPTION
The LZ0P3817 is a 1/4-type (4.5 mm) 350 000- pixel built-in lens color CMOS (Complementary
Metal Oxide Semiconductor) image sensor that consists of a timing generator (TG), a correlated
double sampling (CDS) circuit, an auto gain control AGC) circuit and an analog-to-digital converter ADC) circuit. With small lens and LCC-type flat package, possible to make ultra small color camera easily.

FEATURES
• Progressive scan
• Square pixel
• Compatible with VGA standard
• Number of image pixels : 655 (H) x 493 (V)
• Number of optical black pixels
– Horizontal : 24 front and 24 rear
– Vertical : 3 front and 3 rear
• Pixel pitch : 5.6 μm (H) x 5.6 μm (V)
• R, G, and B primary color mosaic filters
• Image inversion function (horizontally and/or vertically)
• Available for two types of power save mode
– AGC and AD circuits become power-off with serial data
– All circuits become power-off with STBY pin
• Monitoring mode
• Analog output and 8-bit digital output
• Variable gain control (3 to 30 dB)
• Variable electronic focal plane shutter (1/15 to 1/7 875 s)
• Single +2.8 V power supply
• Built-in IR cut-off filter
• Integrated lens : 62˚ horizontal viewing angle
• Package
– 36-pin LCC* type
– Outline dimensions : 11.4 mm (H) x 11.4 mm (V)
– Height : Approx. 7 mm