GENERAL DESCRIPTION
The XE1610-OEMPVT GPS Receiver from RF Solutions is a GPS receiver product which features the revolutionary FirstGPS™ architecture. This complete GPS receiver solution provides high accuracy position and speed performance as well as high sensitivity and tracking capabilities in urban areas. The GPS Receiver comes in a small form factor package. The XE1610-OEMPVT delivers major advancements in GPS performance, accuracy, integration, computing power and flexibility. It is designed to simplify the embedded system integration process.
The FirstGPS is a mixed hardware/software architecture based on the XE16BB10 advanced channel correlator IC and its companion RF downconverter.

KEY FEATURES
*High sensitivity: to -143 dBm tracking, superior urban performance.
*Position accuracy: < 5m CEP (50%) without SA (horizontal)
*Warm Start is under 40 seconds (50%)
*Hot Start is under 12 seconds (50%)
*Ultra low power: < 20 mA @ 3.3V full power, 3 additional low power modes
*Embedded ARM7TDMI
*Small form factor and low cost solution
*Ready-to-plug solution, fully autonomous PVT solution. Easily integrated into existing systems
*On-board RAM for GPS navigation data, on-board Flash memory back-up
*PPS output
*Bidirectional NMEA interface
*Real Time Clock with separate back-up power supply

APPLICATIONS
*Automotive
*Asset management/tracking
*Palmtop, Laptop, PDA
*Location Based Services enabled devices
*Handheld receivers

Description
The RXQ1 / TRXQ1 radio transceiver modules provide reliable wireless communications for the transfer of data at rates of up to 20 K baud. Their unique features of narrow band operation and user channel selection combined with excellent interference rejection make them an ideal choice for next generation applications.
Operating within the 433.92MHz band the modules can operate in two narrow band channels; 433.92 MHz and 434.33MHz. The modules use a crystal controlled design which provides narrow band performance which is far superior to other wideband ‘SAW’ based designs.
The TRXQ1 Smart Radio Transceiver has the functions of a complete radio modem, it simply requires CMOS/TTL data at the transmit input and the corresponding transceiver(s) output the same data There RXQ1 provides a basic Radio transceiver.
Possible applications include one-to-one and multi-node wireless links in applications including car and building security, EPOS, inventory tracking, remote industrial process monitoring and computer networking. Because of their small size and low power requirements, both modules are ideal for use in portable, batterypowered applications such as hand-held terminals.

Features
*RF Transceiver or Intelligent Modem Versions
*Host Data Rate upto 19,200 Baud
*Data Rates to 20 K baud.
*2 Selectable RF Channels
*Narrowband Crystal Controlled
*Optimal Range 200m
*Supply Voltage 3-5V
*Very Stable Operating Frequency
*Low Profile Ceramic DIL Package
*Operates from –20 to +850C

Applications
*Wireless Security Systems
*EPOS Terminals
*Sensor Data logging
*Remote Telemetry & Telecommand
*Remote Meter Reading

RXQ1, TRXQ1-433F, FM-RXQ1-433, RF600T-EVAL

Description
The QFMT6 AND QFMR6 miniature UHF radio modules enable the implementation of a reliable telemetry link at data rates of up to 64 Kbits/s.
The QFMT6 is based on a classical phase lock loop using a crystal reference oscillator. This results in an accurately controlled RF output in the frequency domain. A significant advantage of this is that narrow filtering can then be used in the receiver, which results in high interference immunity.
In addition, the modules are fitted with an on-board voltage regulator which enhances performance from improved supply filtering and also ensures a constant RF output level.
The QFMR6 is based on the single conversion superhet principle utilising a crystal based phase lock loop for accurate generation of the local oscillator. This allows use of high Q bandpass filters resulting in good adjacent channel selectivity and high interference immunity.
The QFMT6 and QFMR6 modules will suit one-to-one and multi-node wireless links in applications including building and car security, remote industrial process monitoring and computer networking. Because of its small size and low power requirements, these modules are ideal for use in portable battery powered wireless applications. These modules may be used within areas of high interference, or ‘radio traffic’. Due to the design, they provide a highly reliable radio link.

Features
*Miniature SIL Package
*Fully Shielded
*Data Rates Up To 64kbits/S
*Range upto 200 Metres
*Single Supply Voltage
*Industry Pin Compatible

Applications
*Vehicle Alarm Systems
*Remote Gate Controls
*Garage Door Openers
*Domestic And Commercial Security

T6-8684-64, T6-86985, T6-915-20, T6-915-64

Description
The RF650 radio transceiver module provides a reliable wireless communications for the transfer of data at Gaussian Frequency Shift Keying (GFSK), Manchester encoded, RF data rates of up to 100 kbps. Their unique features of narrow band operation and user channel selection combined with excellent interference rejection make them an ideal choice for next generation applications. The transceivers have the functions of a complete radio modem and simply require CMOS/TTL data at the transmit input and the corresponding transceiver(s) output the same data. Preamble and CRC are automatically generated and added to the RF transmission.
Operating within the 433MHz band the modules operate in user selectable channels. The RF650 can use any channel in 100kHz steps. The modules both use a crystal controlled design which provides narrow band performance which is far superior to other wideband ‘SAW’ based designs.
Possible applications include one-to-one and multi-node wireless links in applications including car and building security, EPOS, inventory tracking, remote industrial process monitoring and computer networking. Because of their small size and low power requirements, both modules are ideal for use in portable, batterypowered applications such as hand-held terminals.

Features
*Intelligent Modem RF Transceiver
*RF Data Rates to 100 kbps
*Up to 250 metres Range
*Selectable ‘Narrowband’ RF Channels
*Crystal Controlled RF Design
*Supply Voltage 3.3V
*Serial Data Interface with Handshake
*Host Data Rates up to 38,400 Baud
*Very Stable Operating Frequency
*Low Profile Ceramic DIL Package
*Operates from –20 to +70 0C
*Evaluation Board for Rapid Development

Applications
*Wireless Security Systems
*EPOS Terminals
*Sensor Data logging
*Remote Telemetry & Telecommand
*Remote Meter Reading

RF650-868, RF650-EVAL

Description
A range of miniature single in line (SIL) hybrid modules providing complete four channel Radio Receiver/Decoder systems available in either AM or FM. When used with the 110-AM or 120-FM series pocket keyfobs a complete remote telemetry system is obtained with up to 150 metres range.
The module consists of a front end super-heterodyne or super-regen RF receiver with an embedded microcontroller decoding a highly secure Keeloq protocol signal.
The module has an easy-to-use 'LEARN' facility, and is capable of learning up to 50 unique keyfob encoders.
The module requires a 5V power supply and provides a direct LED drive showing data reception and four digital data outputs. The outputs may be programmed for momentary or latching configuration.
The modules have flash re-programmability feature to enable field re-programming of the controller.

Features
*Miniature RF Receiver and Decoder.
*Advanced Keeloq Decoding
*Advanced Laser Trimmed Ceramic Module
*AM Range up to 100 Metres
*FM Range up to 150 Metres
*Easy Learn Transmitter Feature.
*Outputs, Momentary or Latching & Serial Data.
*Direct Led Drive Shows Data Reception
*Single Supply 5V
*Flash re-programmable
*HIR6 Low Power Version (<1mA)
*Directly compatible with 110 Series
*Compatible with RF600E
*EMC Compliant for use in Europe
*FCC Certified for use in USA

Applications
*General Remote Control Systems.
*Garage Door Openers.
*Car, Caravan, Motorcycle Alarms
*Remote Switching.
*Remote Gates.
*Paging.

HIRK-433, HIR6-433, HIRK-315A, HIRK-433A, HIR6-433A, HIRK-433F

Description
The RF Solutions RF600E, & RF600D are easy to use encoder and decoder I/C’s. They have been designed to achieve the maximum possible range from any radio / Infra Red transmitter receiver set.
Unlike other encoder /decoder devices the RF600E/600D provide an unprecedented level of security which prevents copying or grabbing whist also obtaining optimum range from the transmitter and receiver.
The devices are very easy to use and can be inserted directly into a circuit. The RF600D has an easy learn feature enabling it to learn up to 7 unique RF600E encoder devices in standalone mode or up to 48 encoder devices when used in conjunction with an external EEPROM.
These devices enable a simple but secure remote telemetry application whilst obtaining the maximum range from the radio set.

Features
*Highly Secure Protocol
*RF Encoder & Decoder IC’s
*Simple to Use
*Stand Alone Operation
*Achieves Maximum Range from RF Modules
*1 – 4 Switch Options (15 states)
*Decoder Serial Output
*Led Indication of Transmission
*Directly Compatible with Keeloq Decoder
*Easy Learn Feature of Transmitters
*Sleep Mode
*Up to 48 Transmitters can be Learned
*Optimum Range: AM up to 100m, FM up to 200m, IR up to 20m
*Compatible with RF Solutions Systems

Typical Applications
*General Purpose Remote Control
*Automotive alarm systems
*Gate and garage openers
*Electronic door locks
*Identity tokens
*Burglar alarm systems

RF600E, RF600E-SO, RF600DR6, RF600DR6-SO, RF600D8R6, RF600D-SO8R6

General Description
The QFMT5 and QFMR5 data link modules are miniature UHF radio modules, which enable the
implementation of a simple telemetry link upto 300 metres, and at data rates of up to 128Kbit/s
The QFMT5 and QFMR5 modules will suit one-toone and multi-node wireless links in applications including building and car security, remote industrial process monitoring and computer networking.
Because of its small size and low power requirements, these modules are ideal for use in
portable battery powered wireless applications.

Features
*MINIATURE SIL PACKAGE
*FULLY SHIELDED
*DATA RATES UP TO 128KBITS/S
*RANGE UPTO 300 METRES
*SINGLE SUPPLY VOLTAGE
*INDUSTRY PIN COMPATIBLE

Applications
*VEHICLE ALARM SYSTEMS
*REMOTE GATE CONTROLS
*GARAGE DOOR OPENERS
*DOMESTIC AND COMMERCIAL SECURITY

QFMT5-434-5V, QFMT5-434-3V, QFMT5-434-128

• Addressed Mode With Acknowledge
• Broadcast Mode
• Automatic Retry
• Serial Interface
• Stand Alone Operation
• Achieves Maximum Range From RF Modules
• Flow Control Option
• Two Telemetry I/O Lines (addressed mode only)
• Compatible With Most RF Modules

The RF600T provides a simple interface between TTL level asynchronous serial data sources and standard RF modules (Transceiver, Transmitter or Receiver).
The device allows for either broadcast or addressed point to point modes of operation and is simple to use with minimal interface required.
Data packet generation is automatically performed along with ‘Manchester’ encoding and CRC based error checking.
In addition, in addressed mode, automatic retries ensure that the host is informed of successful or failed data packet delivery.
The RF600T uses control lines to handle the flow of data to and from the host, and incorporates a 190 byte data buffer.

Typical Applications
• Wireless RS232
• Cable Replacement
• Alarm Systems
• Communications Systems
• Local Area Networking

Hardware Features
• 3.0 – 5.5V Operation. (2.0 – 5.5V optional)
• 190 Byte Internal Buffer
• ‘Manchester’ Modulation On Radio Link
• CRC Error Checking
• 18 pin DIP/SOIC Package
• 2 Digital Telemetry Lines (addressed mode only)
• Asynchronous Serial Host Interface

RF600T-SO

Features
· Operation on 434.075, 868.40 and 914.5 MHz
· X2011 version includes integrated pcb loop antenna (434 & 868 MHz versions)
· Double RF filtering = High Reliability RF Link
· Data rates to 20 kbps (Wide-band 64 kbps version available to order)
· -112 dBm receiver sensitivity (434 version)
· CD and RSSI outputs
· Crystal stabilised accurate RF, hence narrower BW filter utilised
· Results in over 300m range
· EN 300 220-1, 300 683 & FCC compliant
· Immune to Tetra and High power Radio Amateur Repeater Stations

Applications
· EPOS Terminals
· Wireless Networking
· Domestic And Commercial Wireless Security Systems
· Panic Attack Facility
· Remote Control For Cranes Etc

General Description
The X2010 radio transceiver module was designed to provide reliable wireless operation at
moderate data rates for use throughout the world.
Its unique features of narrower RF channel bandwidths and hence high interference rejection
capability at SAW module prices make the X2010 the ideal choice for next generation applications.
Available at several frequency options, these modules have been designed to provide a reliable
wire free link within the presence of other interference at the same frequency, accounting for
the increased traffic from other legal users of the radio spectrum.
The transmitter section uses a PLL design that utilises a highly stable and accurate reference
crystal oscillator.
This results in a RF transmission tightly controlled in its frequency spread and over its operating temperature range.
This is exploited in the receiver design.
The receiver section uses a single conversion super-het design, again using PLL technology.
Hence narrower bandwidth RF filters are utilised which result in superior rejection of interference as well as providing good receiver sensitivity and hence range.

X2011
X2011-868
X2010-915