Product Overview
TRC102 is a highly integrated single chip, zero-IF, multi-channel, low power RF transceiver. It is an ideal fit for low cost, high volume, two way short-range wireless applications for use in the unlicensed 400-1000 MHz frequency bands. The TRC102 is FCC & ETSI certifiable and improves upon the TRC101 with improved phase noise and is capable of higher output power. All critical RF and baseband functions are completely integrated in the chip, thus minimizing external component count and simplifying and speeding design-ins. Use of a low cost, generic 10MHz crystal and a low-cost microcontroller is all that is needed to create a complete link. The TRC102 also incorporates different sleep modes to reduce overall current consumption and extend battery life. Its small size with low power consumption makes it ideal for various short range radio applications.

Key Features
*Modulation: FSK (Frequency Hopping Spread Spectrum capability)
*Frequency range: 400-1000 MHz
*High sensitivity: (-112 dBm)
*High data rate: Up to 256 kbps
*Low current consumption (RX current ~11mA)
*Operating supply voltage: 2.2 to 3.8V
*Low standby current (0.3uA)
*Programmable Synch Byte
*Integrated PLL, IF, Baseband Circuitry
*Automatic Frequency Adjust(TX/RX frequency alignment)
*Programmable Analog/Digital Baseband Filter
*Programmable Output RF Power
*Programmable Input LNA Gain
*Internal Valid Data Recognition
*Transmit/Receive FIFO
*Standard SPI Interface
*TTL/CMOS Compatible I/O pins
*Programmable CLK Output Freq
*Automatic Antenna tuning circuit
*Low cost, generic 10MHz Xtal reference
*Integrated, Programmable Low Battery Voltage Detector
*Programmable Wake-up Timer with programmable Duty Cycle
*Integrated Selectable Analog/Digital RSSI
*Integrated Crystal Oscillator
*External Processor Interrupt pin
*Programmable Crystal Load Capacitance
*Programmable Data Rate
*Integrated Clock & Data Recovery
*Programmable FSK Deviation Polarity
*External Wake-up Events
*Support for Multiple Channels
-[433 Bands] 95 Channels (100kHz)
-[868 Band] 190 Channels (100kHz)
-[915 Band] 285 Channels (100kHz)
*Power-saving sleep mode
*Very few external components requirement
*Small size plastic package: 16-pin TSSOP
*Standard 13 inch reel, 2000 pieces.

Popular applications
*Active RFID tags
*Automated Meter reading
*Home & Industrial Automation
*Security systems
*Two way Remote keyless entry
*Automobile Immobilizers
*Sports & Performance monitoring
*Wireless Toys
*Medical equipment
*Low power two way telemetry systems
*Wireless mesh sensors
*Wireless modules

Trackback :: http://datasheetblog.com/trackback/2503

댓글을 달아 주세요 Comment

Product Overview
TRC101 is a highly integrated single chip, zero-IF, multi-channel, low power RF transceiver. It is an ideal fit for low cost, high volume, two way short-range wireless applications for use in the unlicensed 300-1000 MHz frequency bands. All critical RF and baseband functions are completely integrated in the chip, thus minimizing external component count and simplifying and speeding design-ins. Use of a low cost, generic 10MHz crystal and a low-cost microcontroller is all that is needed to create a complete link. The TRC101 also incorporates different sleep modes to reduce overall current consumption and extend battery life. Its small size with low power consumption makes it ideal for various short range radio applications.

Key Features
*Modulation: FSK (Frequency Hopping Spread Spectrum capability)
*Frequency range: 300-1000 MHz
*High sensitivity: (-105 dBm)
*High data rate: Up to 256 kbps
*Low current consumption (RX current ~8.5mA)
*Wide operating supply voltage: 2.2 to 5.4V
*Low standby current (0.2uA)
*Integrated PLL, IF, Baseband Circuitry
*Automatic Frequency Adjust(TX/RX frequency alignment)
*Programmable Analog/Digital Baseband Filter
*Programmable Output RF Power
*Programmable Input LNA Gain
*Internal Valid Data Recognition
*Transmit/Receive FIFO
*Standard SPI Interface
*TTL/CMOS Compatible I/O pins
*Programmable CLK Output Freq
*Automatic Antenna tuning circuit
*Low cost, generic 10MHz Xtal reference
*Integrated, Programmable Low Battery Voltage Detector
*Programmable Wake-up Timer with programmable Duty Cycle
*Integrated Selectable Analog/Digital RSSI
*Integrated Crystal Oscillator
*External Processor Interrupt pin
*Programmable Crystal Load Capacitance
*Programmable Data Rate
*Integrated Clock & Data Recovery
*Programmable, Positive/Negative FSK Deviation
*External Wake-up Events
*Support for Multiple Channels
-[315/433 Bands] 380 Channels(25kHz)
-[868 Band] 761 Channels(25kHz)
-[915 Band] 1040 Channels(25kHz)
*Power-saving sleep mode
*Very few external components requirement
*Small size plastic package: 16-pin TSSOP
*Standard 13 inch reel, 2000 pieces.

Popular applications
*Active RFID tags
*Automated Meter reading
*Home & Industrial Automation
*Security systems
*Two way Remote keyless entry
*Automobile Immobilizers
*Sports & Performance monitoring
*Wireless Toys
*Medical equipment
*Low power two way telemetry systems
*Wireless mesh sensors
*Wireless modules

Trackback :: http://datasheetblog.com/trackback/2372

댓글을 달아 주세요 Comment

Description
The TR3001 hybrid transceiver is ideal for short-range wireless data applications where robust operation, small size, low power consumption and low cost are required. The TR3001 employs RFM’s amplifier-sequenced hybrid (ASH) architecture to achieve this unique blend of haracteristics.
All critical RF functions are contained in the hybrid, simplifying and speeding design-in.
The receiver section of the TR3001 is sensitive and stable. A wide dynamic range log detector, in combination with digital AGC and a compound data slicer, provide robust performance in the presence of on-channel interference or noise. Two stages of SAW filtering provide excellent eceiver out-of-band rejection. The transmitter includes provisions for both on-off keyed (OOK) and amplitude-shift keyed (ASK) modulation. The transmitter employs SAW filtering to suppress output harmonics, facilitating compliance with FCC Part 15 and similar regulations.

Features
*Designed for Short-Range Wireless Data Communications
*Supports RF Data Transmission Rates Up to 115.2 kbps
*3 V, Low Current Operation plus Sleep Mode
*Stable, Easy to Use, Low External Parts Count

Trackback :: http://datasheetblog.com/trackback/2231

댓글을 달아 주세요 Comment

DESCRIPTION
The RF1172 is a low-loss, compact and economical surface-acoustic-wave (SAW) filter designed to provide front-end selectivity in 433.92 MHz receivers.
Receiver designs using this filter include superhet with 10.7 MHz or 500 kHz IF, direct conversion and superregen.
Typical applications of these receivers are wireless remote-control and security devices operating in Europe under ETSI I-ETS 300 220.
This coupled-resonator filter (CRF) uses selective null placement to provide suppression, typically greater than 40 dB, of the LO and image spurious responses of superhet receivers with 10.7 MHz IF.
RFM’s advanced SAW design and fabrication technology is utilized to achieve high performance and very low loss with simple external impedance matching (not included).
Quartz construction provides excellent frequency stability over a wide temperature range.

FEATURES
*Ideal Front-End Filter for European Wireless Receivers
*Low-Loss, Coupled-Resonator Quartz Design
*Simple External Impedance Matching
*Rugged TO39 Hermetic Package
TAG filter, SAW

Trackback :: http://datasheetblog.com/trackback/1900

댓글을 달아 주세요 Comment

DESCRIPTION
 The RF3417 is a low-loss, compact, and economical surface-acoustic-wave (SAW) filter designed to provide front-end selectivity in 315.0 MHz receivers.
Receiver designs using this filter include superhet with 10.7 MHz or 500 kHz IF, direct conversion and superregen.
Typical applications of these receivers are wireless remotecontrol and security devices (especially for automotive keyless entry) operating in the USA under FCC Part 15, in Canada under DOC RSS-210, and in Italy.
This coupled-resonator filter (CRF) uses selective null placement to provide suppression, typically greater than 40 dB, of the LO and image spurious responses of superhet receivers with 10.7 MHz IF.
RFM’s advanced SAW design and fabrication technology is utilized to achieve high performance and very low loss with simple external impedance matching (not included).
Quartz construction provides excellent frequency stability over a wide temperature range.

FEATURE
• Ideal Front-End Filter for USA Automotive Wireless Receivers
• Low-Loss, Coupled-Resonator Quartz Design
• Simple External Impedance Matching
• Rugged TO39 Hermetic Package
• Complies with Directive 2002/95/EC (RoHS)

TAG filter, SAW

Trackback :: http://datasheetblog.com/trackback/1564

댓글을 달아 주세요 Comment