Description
The NUC2401MN is an Integrated Common Mode Filter for the elimination of common mode noise in high speed data line applications such as IEEE1394, USB2.0 and other LVDS type applications. ESD protection is integrated into the Common mode filter for superior protection and significant part count reduction.

Features
*Common mode EMI Filtering and ESD Protection
*Integration of 5 Discrete components
*±12 kV ESD Protection per IEC61000−4−2 (Contact Discharge)
*DFN: 2.0 x 2.2 mm Package
*Moisture Sensitivity Level 1
*ESD Rating: Machine Model (MM) = 1.6 kV,  Human Body Model (HBM) = 16 kV
*This is a Pb−Free Device

Applications
*High Speed Differential Data Lines
*USB2.0
*IEEE1394
*LVDS
*MIPI
*MDDI

NUC2401MNTAG

Trackback :: http://datasheetblog.com/trackback/2837

댓글을 달아 주세요 Comment

Description
The NS5B1G384 is Single Pole Single Throw (SPST) high-speed TTL-compatible switch. The low resistance and capacitance characteristics of this switch make it ideal for low-distortion audio, video, and data routing applications. The switch has a normally closed logic configuration meaning the switch is on (NC connected to COM) when IN is low. These switches are available in 5-pin SC−70 and 5-pin TSOP−5 (SOT23−5) packages for operation over the industrial (-40°C to +85°C) temperature range.

Features
*VCC Operating Range: 2.0 V to 5.5 V
*Low On Resistance : RON: 4.0 Typical @ VCC = 4.5 V
*Minimal Propagation Delay : tpd < 0.5 ns
*Control Input Compatible with TTL Levels
*ESD Performance: Human Body Model > ±2 kV
*5-Pin SC−70 or 5-Pin TSOP−5 Packages Available
*These are Pb−Free Devices

Typical Applications
*Audio, Video, and High-Speed Data Switching
*Mobile Phones
*Portable Devices
*Desktop & Notebook Computing

NS5B1G384DFT2G, NS5B1G385DTT1G

Trackback :: http://datasheetblog.com/trackback/2741

댓글을 달아 주세요 Comment

Description
The NS5B1G385 is Single Pole Single Throw (SPST) high−speed TTL−compatible switch. The low resistance and capacitance characteristics of this switch make it ideal for low−distortion audio, video, and data routing applications. The switch has a normally open logic configuration meaning the switch is on (NO connected to COM) when IN is high. These switches are available in 5−pin SC−70 and 5−pin TSOP−5 (SOT23−5) packages for operation over the industrial (−40°C to +85°C) temperature range.

Features
*VCC Operating Range: 2.0 V to 5.5 V
*Low On Resistance : RON: 4.0 Typical @ VCC = 4.5 V
*Minimal Propagation Delay : tpd < 0.5 ns
*Control Input Compatible with TTL Levels
*ESD Performance: Human Body Model > ±2 kV
*5−Pin SC−70 or 5−Pin TSOP−5 Packages Available
*These are Pb−Free Devices

Typical Applications
*Audio, Video, and High−Speed Data Switching
*Mobile Phones
*Portable Devices
*Desktop & Notebook Computing

NS5B1G385DFT2G, NS5B1G385DTT1G

Trackback :: http://datasheetblog.com/trackback/2628

댓글을 달아 주세요 Comment

Description
The NCV7341 CAN transceiver is the interface between a controller area network (CAN) protocol controller and the physical bus and may be used in both 12 V and 24 V systems. The transceiver provides differential transmit capability to the bus and differential receive capability to the CAN controller.
Due to the wide common−mode voltage range of the receiver inputs, the NCV7341 is able to reach outstanding levels of electromagnetic susceptibility (EMS). Similarly, extremely low electromagnetic emission (EME) is achieved by the excellent matching of the output signals.
The NCV7341 is a new addition to the ON Semiconductor CAN high−speed transceiver family and offers the following additional features:

Features
*Ideal Passive Behavior when Supply Voltage is Removed
*Separate VIO Supply for Digital Interface Allowing Communication to CAN Controllers and Microcontrollers with Different Supply Levels
*Fully Compatible with the ISO 11898 Standard
*High Speed (up to 1 Mb)
*Very Low Electromagnetic Emission (EME)
*VSPLIT Voltage Source for Stabilizing the Recessive Bus Level if Split Termination is Used (Further Improvement of EME)
*Differential Receiver with High Common−Mode Range for Electromagnetic Immunity (EMI)
*Up to 110 Nodes can be Connected in Function of the Bus Topology
*Transmit Data (TxD) Dominant Time−out Function
*Bus Pins Protected Against Transients in Automotive Environments
*Bus Pins and Pin VSPLIT Short−Circuit Proof to Battery and Ground
*Thermally Protected
*NCV Prefix for Automotive and Other Applications Requiring Site and Control Changes
*These are Pb−Free Devices*

Typical Applications
*Automotive
*Industrial Networks

NCV7341D21G, NCV7341D21R2G

Trackback :: http://datasheetblog.com/trackback/2500

댓글을 달아 주세요 Comment

DESCRIPTION
The CAT5128 is a single digitally programmable potentiometer (DPP™) designed as an electronic replacement for mechanical potentiometers and trim pots. Ideal for automated adjustments on high volume production lines, they are also well suited for applications where equipment requiring periodic adjustment is either difficult to access or located in a hazardous or remote environment.
The CAT5128 contains a 32-tap series resistor array connected between two terminals A and B. An up/down counter and decoder that are controlled by two input pins, determines which tap is connected to the wiper, W. Wiper-control of the CAT5128 is accomplished with two input control pins, U¯¯P and ¯D¯O¯W¯¯N¯. A high-to-low transition on the U¯¯P input increments the wiper position and a high-to-low transition on the ¯D¯O¯W¯¯N¯ input decrements the wiper position. The tap position is not stored in memory. The wiper is always set to the mid point, tap 15 at power up.
The digitally programmable potentiometer can be used as a three-terminal resistive divider or as a two-terminal variable resistor. DPPs bring variability and programmability to a wide variety of applications including control, parameter adjustments, and signal processing.

FEATURES
*32-position linear taper potentiometer
*Low power CMOS technology
*Single supply operation: 2.5V – 5.5V
*Discrete step-up/step-down digital control
*Resistance values: 10kΩ, 50kΩ and 100kΩ
*Available in SOT-23 8-lead Pb-free package

APPLICATIONS
*Automated product calibration
*Remote control adjustments
*Offset, gain and zero control
*Tamper-proof calibrations
*Contrast, brightness and volume controls
*Motor controls and feedback systems
*Programmable analog functions

CAT5128TBI-10, CAT5128TBI-50, CAT5128TBI-00

Trackback :: http://datasheetblog.com/trackback/2366

댓글을 달아 주세요 Comment

Description
This device is a 4 line EMI filter array for wireless applications.
Greater than −25 dB attenuation is obtained at frequencies from 800 MHz to 4.0 GHz. The NUF4310MN has a cut−off frequency of 185 MHz. This WDFN package is specifically designed to enhance EMI filtering for low−profile or slim design electronics especially where space and height is a premium. It also offers ESD protection−clamping transients from static discharges. ESD protection is provided across all capacitors.

Features
*EMI Filtering and ESD Protection
*Integration of 20 Discrete Components
*Compliance with IEC61000−4−2 (Level 4) >8 kV (Contact) [I/O Pins to GND]
*WDFN Package, 1.6 x 1.0 mm
*Moisture Sensitivity Level 1
*ESD Ratings: Machine Model = C Human Body Model = 3B
*This is a Pb−Free Device*

Benefits
*Reduces EMI/RFI Emissions on a Data Line
*Low Profile Package; Typical Height of 0.75 mm
*Design−Friendly and Easy−to−Use Pin Configurations, Particularly for Portable Electronics
*Integrated Solution Offers Cost and Space Savings in WDFN Package
*Reduces Parasitic Inductances Which Offer a More “Ideal” Low Pass Filter Response
*Integrated Solution Improves System Reliability

Applications
*EMI Filtering and ESD Protection for Data Lines
*Keypad Interface and Protection for Portable Electronics
*Bottom Connector Interface for Mobile Handsets
*Notebook Computers and Digital Cameras
*LCD Display Interface in Mobile Handsets
*Camera Display Interface in Mobile Handsets

NUF4310MNTAG

Trackback :: http://datasheetblog.com/trackback/2222

댓글을 달아 주세요 Comment

Description
The NCP5383 is a two phase buck controller used in low voltage, high current power supplies. Dual-edge pulse-width modulation (PWM) combined with inductor current sensing and adaptive voltage positioning (AVP) reduces system cost by providing the fastest initial response to transient loads thereby requiring less bulk and ceramic output capacitors to satisfy transient load-line requirements. A high performance operational error amplifier is provided, which allows for easy compensation of the system. Protection features include overcurrent protection, undervoltage lockout (UVLO), thermal shutdown and power good monitor.

Features
*Dual-edge PWM for Fastest Initial Response to Transient Loading
*High Performance Operational Error Amplifier
*1% Internal Reference Voltage Accuracy
*Phase-to-Phase Current Balancing
*“Lossless” Differential Inductor Current Sensing
*Differential Current Sense Amplifiers for Each Phase
*Adaptive Voltage Positioning (AVP)
*Frequency Range: 100 kHz – 400 kHz Set by the Resistor
*Power Good Output with Internal Delays
*Programmable Soft Start Time
*Integrated Gate Drivers
*This is a Pb-Free Device

Applications
*Pentium IV Processors
*Graphics Cards
*Low Voltage, High Current Power Supplies

NCP5383MNR2G

Trackback :: http://datasheetblog.com/trackback/2082

댓글을 달아 주세요 Comment

The NLMD5820 is an integrated mono Class-D audio power amplifier and dual SPST switch capable of delivering 2.65 W of continuous average power to 4.0 from a 5.0 V supply in a Bridge Tied Load (BTL) configuration. Under the same conditions, the output power stage can provide 1.4 W to a 8.0 BTL load with less than 1% THD+N. For cellular handsets or PDAs it offers space and cost savings because no output filter is required when using inductive
tranducers. The NLMD5820 incorporates a dual SPST switch which allows signals to bypass the amplifier. The integrated switch operates off a separate supply voltage and maintains a very low RON resistance, 0.5 max @ 2.8 V VCC.
The NLMD5820 processes analog inputs with a pulse width modulation technique that lowers output noise and THD when compared to a conventional sigma-delta modulator. The device allows independent gain while summing signals from various audio sources.
Thus, in cellular handsets, the earpiece, the loudspeaker and even the melody ringer can be driven with a single NLMD5820. Due to its low 42V noise floor, A-weighted, clean listening is guaranteed no matter the load sensitivity.

Features
* Optimized PWM Output Stage: Filterless Capability
* Efficiency up to 90% Low 2.5 mA Typical Quiescent Current
* Large Output Power Capability: 1.4 W with 8.0 Load (CSP) and THD + N < 1%
* Dual SPST with 0.5 Max RON @ VCC = 2.8 V
* High Performance, THD+N of 0.03% @ Vp = 5.0 V, RL = 8.0 , Pout = 100 mW
* Excellent PSRR (-65 dB): No Need for Voltage Regulation
* Surface Mounted Package UDFN16
* Fully Differential Design. Eliminates Two Input Coupling Capacitors
* Very Fast Turn On/Off Times with Advanced Rising and Falling Gain Technique
* External Gain Configuration Capability
* Internally Generated 250 kHz Switching Frequency
* Short Circuit Protection Circuitry
* “Pop and Click” Noise Protection Circuitry
* This is a Pb-Free Device

Applications
* Cellular Phone
* Portable Electronic Devices
* PDAs and Smart Phones

NLMD5820MUTAG

Trackback :: http://datasheetblog.com/trackback/1315

댓글을 달아 주세요 Comment

This series of Power Rectifiers employs the Schottky Barrier principle in a large metal-to-silicon power diode. State-of-the-art geometry features epitaxial construction with oxide passivation and metal overlay contact. Ideally suited for use in low voltage, high frequency switching power supplies, free wheeling diodes, and polarity protection diodes.

Features
* Guardring for Stress Protection
* Low Forward Voltage
* 175°C Operating Junction Temperature
* Epoxy Meets UL 94 V-0 @ 0.125 in
* Short Heat Sink Tab Manufactured - Not Sheared!
* This is a Pb-Free Device

Mechanical Characteristics:
* Case: Epoxy, Molded, Epoxy Meets UL 94 V-0
* Weight: 1.7 grams (approximately)
* Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable
* Lead and Mounting Surface Temperature for Soldering Purposes: 260°C Max. for 10 Seconds
* Device Meets MSL1 Requirements
* ESD Ratings: Machine Model, C (>400 V)

Trackback :: http://datasheetblog.com/trackback/1282

댓글을 달아 주세요 Comment

The NCP3102 is a high efficiency, 10 A DC-DC buck converter designed to operate from a 5 V to 13.2 V supply. The device is capable of producing an output voltage as low as 0.8 V. The NCP3102 can continuously output 10 A through MOSFET switches driven by an internally set 275 kHz oscillator. The 40-pin device provides an optimal level of integration to reduce size and cost of the power supply. The NCP3102 also incorporates an externally compensated transconductance error amplifier and a capacitor programmable soft-start function. Protection features include programmable short circuit protection and under voltage lockout (UVLO). The NCP3102 is available in a 40-pin QFN package.

Features
* Input Voltage Range from 4.5 V to 13.2 V
* 275 kHz Internal Oscillator
* Greater than 90% Maximum Efficiency
* Boost Pin Operates to 25 V
* Voltage Mode PWM Control
* 0.8 V 1% Internal Reference Voltage
* Adjustable Output Voltage by Resistor Divider
* Capacitor Programmable Soft-Start
* 80% Maximum Duty Cycle
* Input Undervoltage Lockout
* Resistor Programmable Current Limit
* This is a Pb-Free Device

Applications
* Servers/Networking
* DSP and FPGA Power Supply
* DC-DC Regulator Modules

Trackback :: http://datasheetblog.com/trackback/1250

댓글을 달아 주세요 Comment