Description
The single-chip V853 microcontroller is a member of NEC’s 32-bit RISC V850 family.
It integrates CPU, ROM, RAM and peripheral functions on chip. The internal bus is 32 bits
wide, the external bus 16 bits wide.

Applications
 Like other V850 series controllers, the V853 device is used for real-time control applications, such as servo motor control in computer peripherals and machine tools, for engine management control, consumer electronics and multimedia. Flash memory, a variety of serial communication channels and AD/DA converters make it the perfect choice for compact communication terminals and complete control systems.
 Typical benefits of Flash memory are individually programmed devices in the final production process and field upgradability. With their low power consumption and power-saving modes, V853 devices are also ideal for portable applications.

Features
• Small 32-bit RISC CPU core
• 30 ns minimum instruction execution time (33 MHz max. clock)
• 16-Mbyte linear address space
• 1-Mbyte external address space
• 32 general-purpose registers
• 74 instructions optimized for embedded control
• DSP functionality with 16-bit multiplication and saturation logic in a single clock cycle
• Up to 8 Kbytes internal RAM
• Interrupt controller
• Real-time pulse unit/timers
• Serial interface with baud rate generator
• A/D and D/A converters
• PWM
• Clock generator
• Power save functions
• Mask ROM, Flash versions
• 100-pin LQFP package

µPD703004AGC-25 µPD703004AGC-33 µPD703003AGC-25 µPD703003AGC-33 µPD70F3004AGC-25
µPD70F3004AGC-33 µPD70F30025AGC-25 µPD70F30025AGC-33 µPD7030025AGC-25
µPD7030025AGC-33 U13919EE2V0CD00 U10243EJ6V0UM00 U10913EJ5V0UM00 U13188EJ2V1DS00
U13189EJ2V0DS00

DESCRIPTION
The µ PA1818 is a switching device which can be driven directly by a 2.5 V power source.
This device features a low on-state resistance and excellent switching characteristics, and is suitable for applications such as power management of notebook
computers and so on.

FEATURES
• 2.5 V drive available
• Low on-state resistance
- RDS(on)1 = 15.2 mΩ MAX. (VGS = −4.5 V, ID = −5.0 A)
- RDS(on)2 = 16 mΩ MAX. (VGS = −4.0 V, ID = −5.0 A)
- RDS(on)3 = 25 mΩ MAX. (VGS = −2.5 V, ID = −5.0 A)
• Built-in G-S protection diode against ESD

ABSOLUTE MAXIMUM RATINGS (TA = 25°C)
* Drain to Source Voltage (VGS = 0 V)         VDSS           −20 V
* Gate to Source Voltage (VDS = 0 V)          VGSS         ± 12 V
* Drain Current (DC) (TA = 25°C)                 ID(DC)       ± 10 A
* Drain Current (pulse)                              ID(pulse)    ± 40 A
* Total Power Dissipation                           PT              2.0 W
* Channel Temperature                              Tch             150 °C
* Storage Temperature                               Tstg          −55 to +150 °C

UPA1818GR-9JG

The UPD78C18 is an 8-bit CMOS microcontroller which integrates 16-bit ALU, ROM, RAM, an A/D converter, a multi-function timer/event counter, and a general-purpose serial interface onto a single chip, and whose memory (ROM/RAM) is externally expandable up to 31 Kbytes. The UPD78C18 can operate at low power consumption because of its CMOS architecure and is provided with a standby function that enables data retention with an even lower power consumption. The UPD78C17 is the ROM-less version of the UPD78C18. Its memory (ROM/RAM) is expandable externally up to 63 Kbytes. A detailed explanation of the functions is provided in the user's manual listed below. It should be read before starting design work. 87AD Series UPD78C18 User's Manual: IEU-1314

FEATURES
• 159 types of instructions: 87AD series instruction set plus multiply/divide and 16-bit operation instructions
• Instruction cycle: 0.8 ms (at 15-MHz operation)
• Internal ROM: 32768 x 8 bits (UPD78C18 only)
• Internal RAM: 1024 x 8 bits
• Up to 64 Kbytes of memory (ROM/RAM) can be directly addressed.
• High-resolution 8-bit A/D converter: 8 analog inputs
• General-purpose serial interface: Asynchronous, synchronous, I/O interface modes
• Multi-function 16-bit timer/event counter
• Two 8-bit timers
• I/O lines Input/output ports : 28 (UPD78C17), 40 (UPD78C18) Edge detection inputs : 4
• 11 interrupt functions External : 3, Internal: 8 (Non-maskable: 1, Maskable: 10)
• Zero-cross detection function: (2 inputs)
• Standby function: HALT mode, hardware/software STOP mode
• Mask option pull-up resistors can be incorporated into Ports A, B, and C. (UPD78C18 only)

UPD78C17CW
UPD78C17GF-3BE
UPD78C17GQ-36
UPD78C18CW-XXX
UPD78C18GF-XXX-3BE
UPD78C18GQ-XXX-36

DESCRIPTION
The UPC358 is a dual operational amplifier which is designed to operate from a single power supply over a wide range of voltages. Operation from split power supplies is also possible and the power supply current drain is very low. Further advantage, the input commonmode voltage range includes ground in the linear mode.

FEATURES
• Internally frequency compensation
• Wide output voltage swing V– to V+ –1.5 V
• Common mode input voltage range includes V–
• Wide supply voltage range
  3 V to 30 V (Single)
  ±1.5 V to ±15 V (Split)
• Output short circuit protection

DESCRIPTION
The mPC8172TB is a silicon monolithic integrated circuit designed as frequency up-converter for wireless transceiver transmitter stage. This IC is manufactured using NEC’s 30 GHz fmax. UHS0 (Ultra High Speed Process) silicon bipolar process. This IC is as same circuit current as conventional mPC8106TB, but operates at higher frequency, higher gain and lower distortion. Consequently this IC is suitable for mobile communications.

FEATURES
• Recommended operating frequency : fRFout = 0.8 to 2.5 GHz
• Higher IP3 : CG = 9.5 dB TYP., OIP3 = +7.5 dBm TYP. @ fRFout = 0.9 GHz
• High-density surface mounting : 6-pin super minimold package
• Supply voltage : VCC = 2.7 to 3.3 V

APPLICATIONS
• PCS1900M
• 2.4 GHz band transmitter/receiver system (wireless LAN etc.)

UPC8172TB-E3

DESCRIPTION
The UPC1654A Silicon Microwave Monolithic IC is designed for general purpose and IF amplifier applications. This amplifier is matched to 50 W  and is cascadable for multi-stage
applications. The UPC1654A features excellent linearity with 10 dBm saturated output power and broadband performance up to 1100 MHz. Reliability and performance uniformity are assured by NEC's stringent quality control procedures. The UPC1654A is available in a hermetically sealed package.

FEATURES
• BROADBAND PERFORMANCE: 10 to 1100 MHz
• INPUT AND OUTPUT MATCHED TO 50 W
• AVAILABLE IN CHIP OR HERMETIC PACKAGE
• EXCELLENT LINEARITY
  Over +10 dBm Saturated Output Power
• CASCADABLE FOR MULTISTAGE APPLICATIONS
• HIGH RELIABILITY

UPC1654A