Description
The new LT series device provides reliable, noncycling protection against overcharging and short circuits events for rechargeable battery cells where resettable protection is desired.

Features
*RoHS compliant and lead-free
*Weldable nickel terminals
*Compact design saves board space
*Low resistance
*Provides overcurrent protection at 100°C trip temperature

Applications
*Rechargeable battery cell protection
-Mobile phones
-Laptop computers

15LT070, 24LT100, 24LT180, 24LT190, 24LT260, 24LT300, 24LT310, 24LT340

Trackback :: http://datasheetblog.com/trackback/2871

댓글을 달아 주세요 Comment

General Description
Teccor offers bidirectional alternistors with current ratings from 6 A to 40 A and voltages from 200 V to 1000 V as part of Teccor's broad line of thyristors. Teccor's alternistor is specifically designed for applications that switch highly inductive loads. A special chip offers the same performance as two thyristors (SCRs) wired inverse parallel (back-to-back), providing better turn-off behavior than a standard triac. An alternistor may be triggered from a blocking to conduction state for either polarity of applied AC voltage with operating modes in Quadrants I, II, and III.
This new chip construction provides two electrically separate SCR structures, providing enhanced dv/dt characteristics while retaining the advantages of a single-chip device.
All alternistors have glass-passivated junctions to ensure longterm reliability and parameter stability. Teccor's glass-passivated junctions offer a reliable barrier against junction contamination.
Teccor's TO-218X package is designed for heavy, steady powerhandling capability. It features large eyelet terminals for ease of soldering heavy gauge hook-up wire. All the isolated packages have a standard isolation voltage rating of 2500 V rms.
Variations of devices covered in this data sheet are available for custom design applications. Consult the factory for further information.

Features
*RoHS Compliant
*High surge current capability
*Glass-passivated junctions
*2500 V ac isolation for L, J, and K Packages
*High commutating dv/dt
*High static dv/dt

Q2006VH3, Q2006DH3, Q4006VH3, Q4006DH3

Trackback :: http://datasheetblog.com/trackback/2768

댓글을 달아 주세요 Comment

Description
The Multipulse™ SIDAC is a voltage switch used in Metal-Halide lamp ignition circuits as well as High Pressure Sodium lamp ignition circuits for outdoor street and area lighting. This robust solid state switch is designed to handle lamp igniter applications requiring operation at ambient temperatures up to 90°C where igniter circuit components can raise SIDAC junction temperature up to 125°C, especially when the lamp element is removed or ruptured. Its excellent commutation time (tCOMM) makes this robust product best suited for producing multiple pulses in each half cycle of 50/60 Hz line voltage. The Multipulse™ SIDAC is offered in DO-15 axial leaded package.
Kxxx1G SIDAC has a repetitive off-state blocking voltage (VDRM) of 180V to 270V minimum depending actual device type. Blocking capability is ensured by glass passivated junctions for best reliability. Package is epoxy encapsulation with tin-plated copper alloy leads.

Features
*AC circuit oriendted
*RoHS Compliant
*Triggering Voltage of 200 to 380V

Applications
Typical application circuit presented in Figure 10 of this data sheet (Typical Metal Halide Ignitor Circuit).

K2201G, K2401G, K2501G, K3601G, K2201G, K2401G, K2501G, K3601G

Trackback :: http://datasheetblog.com/trackback/2538

댓글을 달아 주세요 Comment

Description
The Littelfuse Industrial TMOV34S series thermally protected varistor represents a new development in circuit protection. It consists of a 34mm square format varistor element ( MOV) with an integral thermally activated element designed to open in the event of overheating due to abnormal over-voltage, limited current conditions as outlined in UL1449 Feb. 1998 edition.The device has a third lead, an indicator lead, which may be used to indicate that the MOV has been disconnected from the circuit. This lead facilitates connection to monitoring circuitry. The TMOV34S devices offer quick thermal response due to the close proximity of the integrated thermal element to the MOV body. The integrated configuration also offers lower inductance than most discreet solutions resulting in improved clamping performance to fast over-voltage transients.

Features
*US Patent for Thermally Protected MOV- Patent # 6636403
*Designed to facilitate compliance to UL1449 for TVSS product.
*Hi Peak Current Rating to 40 kA.
*-55 Deg C to +85 Deg C operating temp.
*Agency Recognition : UL
*Alternative Design available with narrow 3mm wide monitor (right) lead.

Applications
*TVSS Products
*AC Panel Protection Modules
*AC Line Power Supplies
*AC Power Meters
*UPS (Uninterruptable Power Supply)
*Inverters
*AC/DC Power Supplies
*DIN Rail

TMOV34S111M, TMOV34S131M, TMOV34S141M, TMOV34S151M

Trackback :: http://datasheetblog.com/trackback/2407

댓글을 달아 주세요 Comment

Description
The MLN SurgeArray™ Suppressor is designed to help protect components from transient voltages that exist at the circuit board level. This device provides four independent suppressors in a single leadless chip in order to reduce part count and placement time as well as save space on printed circuit boards.
SurgeArray™ devices are intended to suppress ESD, EFT and other transients in order to protect integrated circuits or other sensitive components operating at any voltage up to 18VDC. SurgeArray devices are rated to the IEC 61000-4-2 human body model ESD to help products attain EMC compliance. The array offers excellent isolation and low crosstalk between sections.
The inherent capacitance of the SurgeArray Suppressor permits it to function as a filter/suppressor, thereby replacing separate zener/capacitor combinations.
The MLN array is manufactured using the Littelfuse Multilayer technology process and is similar to the Littelfuse ML and MLE Series of discrete leadless chips.
The MLN can also be provided in a Dual version. Contact Littelfuse for information.

Features
*RoHS Compliant
*Four Individual Devices in One Chip
*ESD Rated to IEC 61000-4-2 (Level 4)
*AC Characterized for Impedance and Capacitance
*Low Adjacent Channel Crosstalk, -55dB at 10MHz (Typ)
*Low Leakage
*Operating Voltage up to 18VM(DC)
*-55oC to 125oC Operating Temperature Range
*Low-Profile, PCMCIA Compatible

Applications
*Data, Diagnostic I/O Ports
*Analog Signal/Sensor Lines
*Portable/Hand-Held Products
*Mobile Communications/Cellular Phones
*Computer/DSP Products
*Industrial Instruments Including Medical

V5.5MLN41206, V9MLN41206, V14MLN41206, V18MLN40805

Trackback :: http://datasheetblog.com/trackback/2272

댓글을 달아 주세요 Comment

Description
PulseGuard ESD Suppressors help protect sensitive electronic equipment against electrostatic discharge (ESD). They supplement the on-chip protection of integrated circuitry and are best suited for low-voltage, high-speed applications where low capacitance is important. Data ports
utilizing such high-speed protocols as USB 2.0, IEEE1394, HDMI and DVI can benefit from this new technology. PulseGuard suppressors use polymer composite materials to suppress fast-rising ESD transients (as specified in IEC 61000-4-2), while adding virtually no capacitance to the circuit.

Features
*RoHS compliant and lead-free
*Ultra-low capacitance
*Low leakage current
*Fast response time
*Bi-directional
*Withstands multiple ESD strikes
*Compatible with pick-and-place processes
*Available in 1000, 3000, 5000 and 10000 piece reels (EIA-RS481)

Applications
*HDTV Hardware
*Laptop/Desktop Computers
*Network Hardware
*Computer Peripherals
*Digital Cameras
*External Storage
*Set-Top Boxes

PGB1010603, PGB102ST23

Trackback :: http://datasheetblog.com/trackback/2114

댓글을 달아 주세요 Comment

GENERAL DESCRIPTION
The Broadband Optimized™ SL1002 series has been especially developed for use in broadband equipment. Unique design features offer high levels of performance on fast rising transients in the domain of 100V/μS to 1KV/μS, which are those most likely from induced Lightning disturbances. These devices have Ultra low capacitance (typically 1.2pF or less) and present insignificant signal losses up to 1.5GHz. These devices are extremely robust and are able to divert a 5000A pulse without destruction. For AC Power Cross of long duration, overcurrent protection is recommended.

FEATURES
*RoHS compliant and Lead-free
*Ultra Low Insertion Loss
*Surface mountable
*5KA surge capability tested with 8/20μS pulse as defined by IEC 61000-4-5
*Excellent response to fast rising transients.
*Can be used to meet Telcordia GR1089 without series resistance
*10/700 6KV capability, as per ITUT k.21, enhanced test level
*2000 Amp 2/10μS surge rating
*Meets FCC part 68 10/160μs waveform, 200A test and 10/560μs waveform 100A test.

APPLICATIONS
*Broadband equipment.
*ADSL equipment.
*XDSL equipment.
*Satellite and CATV equipment.
*General telecom equipment.

SL1002A090, SL1002A230, SL1002A250, SL1002A260, SL1002A350, SL1002A600

Trackback :: http://datasheetblog.com/trackback/1986

댓글을 달아 주세요 Comment

Description
This new broadband protection device from Littelfuse provides overvoltage protection for applications such as 10/100/1000 BaseT Ethernet, T3/E3 DS3 interfaces, ADSL2+, and VDSL2+. This new protector combines the TVS diode element with a diode rectifier bridge to provide
both longitudinal and differential protection in one package.
This design innovation results in a capacitive loading characteristic that is log-linear with respect to the signal voltage across the device.
This reduces intermodulation (IM) distortion caused by a typical solid-state protection
solution.
The application schematic provides the connection information.

Features
* RoHS compliant
* MS-012 surface mount package (JEDEC SO-8)
* Low insertion loss, loglinear capacitance
* Combined longitudinal and metallic protection
* Clamping speed of nanoseconds
* UL 94V-0 epoxy molding
* Pending UL recognized component
* Low clamping voltage Applications

Applications
* T1/E1 Line cards
* T3/E3 and DS3 Interfaces
* STS-1 Interfaces
* 10/100/1000 BaseT Ethernet

Trackback :: http://datasheetblog.com/trackback/1697

댓글을 달아 주세요 Comment

Description
The SP725 is an array of SCR/Diode bipolarstructures for ESD and overvoltage protection of sensitive inputs circuits.
The SP725 has 2 protection SCR/Diode device structures per input.
There are a total of 4 available inputs that can be used to protect up to 4 external signal or bus lines.
Overvoltage protection is from the IN (Pins 1 - 4) to V+ or V-.
The SCR structures are dusigned for fast triggering at athreshold of one +VBE diode threshold above V+ (Pin 5,6) or one -VBE diode threshold below V- (Pin 7,8).
From an IN input, a clamp to V+ is activated if a transient pulse causes the input to be increased to a voltage level greater than one VBE above V+.
A similar clamp to V- is activated if a negative pulse, one VBE less than V-, is applied to an IN input.
Refer to Fig 1 and Table 1 for further detaels.
Refer to Application Note AN9304 and AN9612 for furter detail.

Features
* ESD interface per HBM Standards
- IEC 61000-4-2, Direct Discharge...........8kV (Level 4)
- IEC 61000-4-2, Air Discharge..............15kV (Level 4)
- MIL-STD-3015.7.............................................25kV
* Peak Current Capability
- IEC 61000-4-5 8/20 ㎲ Peak Pulse Current.....± 14 A
- Single Transeint Pulse, 100㎲ Pulse Width ......± 8 A
* Designes to Provede Over-Voltage Protection
- Single-Ended Voltage Range to .....................+ 30V
- Differential Voltage Range to...........................±15V
* Fast Switching....................................2ns Risetime
* Low input Leakages..................5 nA at 25˚C Typical
* Low input Capacitance.........................5 ㎊ Typical
* An Array of 4 SCR/Diode Pairs
* Operating Temperature Range...........-40 ˚C to 105 ˚C

Applications
* Microprocessor/Logic
* Data Bus Protection
* Analog Device input Protection
* Voltage Clamp

SP725ABG
SP725ABTG

Trackback :: http://datasheetblog.com/trackback/1570

댓글을 달아 주세요 Comment