General Description
The HMC-VVD102 is a monolithic GaAs PIN diode ased Voltage Variable Attenuator (VVA) which exhibits low insertion loss, high IP3 and wide dynamic range. All bond pads and the die backside are Ti/Au metallized and the PIN diode devices are fully passivated for reliable operation. This wideband MMIC VVA is compatible with conventional die attach methods, as well as thermocompression and thermosonic wirebonding, making it ideal for MCM and hybrid microcircuit applications. All data shown herein is measured with the chip in a 50 Ohm environment and contacted with RF probes

Features
*Low Insertion Loss: 1.5 dB
*Wide Dynamic Range: 18 dB
*High Input IP3: +17 dBm
*Analog Control Voltage: -4 to +4V
*Die Size: 1.01 x 1.175 x 0.1 mm

Typical Applications
This HMC-VVD102 is ideal for:
*Point-to-Point Radios
*Point-to-Multi-Point Radios
*Military Radios, Radar & ECM
*Test Equipment & Sensors
*Space

General Description
The HMC701LP6CE is a SiGe BiCMOS fractional-N frequency synthesizer. The synthesizer includes a 8GHz 16-bit RF N-Divider, a 24-bit delta-sigma modulator, a very low noise digital phase frequency detector (PFD), and a precision controlled charge pump. In addition the synthesizer supports an external step tuned VCO .
The fractional synthesizer features an advanced delta-sigma modulator design that allows ultra-fine frequency step sizes. The synthesizer features the ability to alter both the phase-frequency detector (PFD) gain and the cycle slipping characteristics of the PFD. This feature can reduce the time to arrive at the new frequency by 50% vs. conventional PFDs. Ultra low in-close phase noise also allows wider loop bandwidths for faster frequency hopping.
The synthesizer contains a built-in linear sweeper function, which allows it to perform frequency chirps with a wide variety of sweep times, polarities and dwells, all with an external or automatic sweep trigger.
A General Purpose Output (GPO) bus supports the use of multiple VCO s. In addition the synthesizer has a number of auxiliary clock generation modes that can be accessed via the GPO.

Features
*Fractional or Integer Modes
*8 GHz, 16-Bit RF N-Counter
*24-Bit Step Size Resolution, 3 Hz typ
*Ultra Low Phase Noise 6 GHz, 50 MHz Ref.
-103 / -110 dBc/Hz @ 20 kHz (Frac / Integer)
*Reference Path Input: 200 MHz
*14-Bit Reference Path Divider
*Low Fractional Spurious
*Reference spurs: -90 dBc typ
*Auto and Triggered Sweeper Functions
*Cycle Slip Prevention (CS P) for fast settling
*Autotune support for external step tuned VCO s
*Multi-VCO Support
*Auxiliary Clock Source
*40 Lead 6x6mm SMT Package: 36mm²

Typical Applications
*Base Stations for Mobile Radio (GSM, PCS , DCS , CDMA, WCDMA)
*Wireless LAN s, WiMax
*Communications Test Equipment
*CATV Equipment
*FMCW Sensors
*Automotive Radar
*Phased-Array Systems

General Description
The HMC656LP2E / 657LP2E / 658LP2E are a line of wideband fi xed value SMT 50 Ohm matched attenuators which offer relative attenuation levels of 10, 15 and 20 dB respectively. These passive attenuators are ideal for military, test equipment, and other wideband applications where extremely fl at attenuation, and excellent VSWR vs. frequency are required.
These wideband attenuators handle up to +25 dBm of input power, and are compatible with high volume surface mount manufacturing techniques.

Features
*3 Attenuator Products:
*10, 15, & 20 dB Fixed Attenuation Levels
*Wide Bandwidth: DC - 25 GHz
*Excellent Attenuation Accuracy
*Power Handling: +25 dBm
*6 Lead 2x2mm SMT Package: 4mm2

Typical Applications
The HMC656LP2E - HMC658LP2E are ideal for:
*Fiber Optics
*Microwave Radio
*Military & Space
*Test & Measurement
*Scientifi c Instruments
*RF / Microwave Circuit Prototyping

HMC657LP2E, HMC658LP2E

General Description
The HMC616LP3(E) is a GaAs PHEMT MMIC Low Noise Amplifi er that is ideal for Cellular/3G and LTE/WiMAX/4G basestation front-end receivers operating between 175 and 660 MHz. The amplifi er has been optimized to provide 0.5 dB noise fi gure, 24 dB gain and +37 dBm output IP3 from a single supply of +5V. Input and output return losses are excellent with minimal external matching and bias decoupling components. The HMC616LP3(E) shares the same package and pinout with the HMC617-LP3(E) and HMC618LP3(E) LNAs. The HMC616LP3(E) can be biased with +3V to +5V and features an externally adjustable supply current which allows the designer to tailor the linearity performance of the LNA for each application.

Features
*Low Noise Figure: 0.5 dB
*High Gain: 24 dB
*High Output IP3: +37 dBm
*Single Supply: +3V to +5V
*50 Ohm Matched Input/Output
*16 Lead 3x3mm QFN Package: 9 mm2

Typical Applications
The HMC616LP3(E) is ideal for:
*Cellular/3G and LTE/WiMAX/4G
*BTS & Infrastructure
*Repeaters and Femtocells
*Public Safety Radio
*DAB Receivers

HMC616LP3E

General Description
The HMC398QS16G & HMC398QS16GE are single chip GaAs InGaP Heterojunction Bipolar Transistor (HBT) MMIC VCOs. The HMC398QS16G & HMC398QS16GE integrate resonators, negative resistance devices, varactor diodes and divide-by-8 prescalers. The VCO’s phase noise performance is excellent over temperature, shock, and process due to the oscillator’s monolithic structure. Power output is +7 dBm typical from a 5V supply voltage. The voltage controlled oscillator is packaged in a low cost, surface mount 16 leaded QSOP package with an exposed base for improved RF and thermal performance. The HMC398QS16G & HMC398QS16GE require no external components

Features
*Pout: +7 dBm
*Phase Noise: -105 dBc/Hz @100 KHz Typ.
*No External Resonator Needed
*Single Supply: 5V @ 325 mA
*QSOP16G SMT Package

Typical Applications
Low noise MMIC VCO w/Divide-by-8 for Ku-Band applications such as:
*Point-to-Point Radios
*Point-to-Multi-Point Radios / LMDS
*VSAT

398QS16GE

General Description
The HMC-C050 is a GaAs HBT Ultra Low Noise Amplifi er in a miniature, hermetic module designed to operate between 2 and 18 GHz. This high dynamic range amplifi er module provides 13.5 dB of gain, 5 dB noise fi gure and up to +22.5 dBm of OIP3 with a single supply of +5V. The ultra low phase noise contribution of -160 dBc/Hz, enables superior modulation accuracy within transceiver architectures. The wideband distributed amplifi er I/O’s are internally matched to 50 Ohms and DC blocked for robust performance. The module features removable SMA connectors which can be detached to allow direct connection of the I/O pins to a microstrip or coplanar circuit.

Features
*ultra Low Phase Noise: -160 dBc/Hz @ 10 kHz
*Noise Figure: 5 dB
*Gain: 13.5 dB
*Output IP3: +22.5 dBm
*50 Ohm Matched Input/Output
*Single Supply Voltage: +5V
*Hermetically Sealed Module
*Field Replaceable SMA Connectors
*-55 to +85˚C Operating Temperature

Typical Applications
The HMC-C050 is ideal for:
*Microwave Radio
*Military & Space
*Test Instrumentation
*VSAT

General Description
The HMC-C051 is a general purpose double balanced mixer housed in a miniature hermetic module that can be used as an upconverter or downconverter between 11 and 20 GHz. This mixer is fabricated in a GaAs MESFET process, and requires no external components or matching circuitry. The HMC-C051 provides excellent LO to RF and LO to IF isolation due
to optimized balun structures. The module features removable SMA connectors which can be detached to allow direct connection of the I/O pins to a microstrip or coplanar circuit.

Features
*High LO/RF Isolation: 43 dB
*Passive Double Balanced Topology
*Low Conversion Loss: 7 dB
*Wide IF Bandwidth: DC - 6 GHz
*Robust 1,000V ESD, Class 1C
*Hermetically Sealed Module
*Field Replaceable SMA Connectors
*-55 to +85 °C Operating Temperature

Typical Applications
*The HMC-C051 is ideal for:
- Point-to-Point Radios
- Point-to-Multi-Point Radios & VSAT
- Test Equipment & Sensors
- Military End-Use

General Description
The HMC-C049 is a 7 - 14 GHz double balanced mixer which provides a low conversion loss, high isolation, and a wide IF bandwidth. This mixer does not require a DC bias and can operate with an LO power level of +9 dBm. The package is a hermetically sealed module that is assembled and tested to meet MIL-883-STD qualifications.
This product comes standard with three female SMA fi eld replaceable connectors that can also be intercharged with blind mate SMP connectors or detached to allow direct connection of the I/O Pins to a microstrip or coplaner circuit.

Features
*Passive Double Balanced Topology
*High LO/RF Isolation: 48 dB
*Low Conversion Loss: 7 dB
*Wide IF Bandwidth: DC - 5 GHz
*Robust 1,000V ESD, Class 1C
*Hermetic Module

Typical Applications
*The HMC-C049 is ideal for:
*Point-to-Point Radios
*Point-to-Mulit-Point Radios
*Test Equipment & Sensors
*Military End-Use

General Description
The HMC-APH462 is a high dynamic range, two stage GaAs HEMT MMIC 0.8 Watt Power Amplifi er which operates between 15 and 27 GHz.
The HMC-APH462 provides 17 dB of gain, and an output power of +29dBm at 1 dB compression from a +5V supply voltage.
All bond pads and the die backside are Ti/Au metallized and the amplifi er device is fully passivated for reliable operation.
The HMC-APH462 GaAs HEMT MMIC 1Watt Power Amplifi er is compatible with conventional
die attach methods, as well as thermocompression and thermosonic wire bonding, making it ideal for MCM and hybrid microcircuit applications.
All data Shown herein is measured with the chip in a 50 Ohm environment and contacted with RF probes.

Features
* Output IP3: +37 dBm
* P1dB: +29 dBm
* Gain: 17 dB
* Supply Voltage: +5V
* 50 Ohm Matched Input/Output
* Die Size: 3.70 x 2.62 x 0.1 mm

Applications
* Point-to-Point Radios
* Point-to-Multi-Point Radios
* VSAT
* Military & Space

General Description
 The HMC-C039 is a low noise Divide-by-5 Static Divider utilizing InGaP GaAs HBT technology packaged in a miniature, hermetic module with replacable SMA connectors.
This device operates from 0.5 to 8GHz input frequency from a single +5V DC supply.
The low additive SSB phase noise of -155 dBc/Hz at 100 kHz offset helps the user maintain excellent system noise performance.

Features
* Ultra Low SSB Phase Noise: -150 dBc/Hz
* Wide Bandwidth
* Output Power: -1 dBm
* Single DC Supply: +5V @ 80mA
* RoHS Compliant Hermetically Sealed Module
* Field Replaceable SMA Connectors
* -55 to +85 °C Operating Temperature

Typical Applications
Prescaler for 0.5 to 18 GHz PLL Applications:
* Point-to-Point / Multi-Point Radios
* VSAT Radios
* Fiber Optic
* Test Equipment
* Military & Space