Description
24 Vdc Supply, 40 to 870 MHz, CATV GaAs Forward Power Doubler Amplifier Module
Replaced MHW9187.
There are no form, fit or function changes with this part replacement.
RoHS Compliant

Features
* Specified for 79 - , 112- and 132-Channel Loading
* Excellent Distortion Performance
* Higher Output Capability
* GaAs FET Transistor Technology
* Unconditionally Stable Under All Load Conditions

Applications
* CATV Systems Operating in the 40 to 870 MHz Frequency Range
* Output Stage Amplifier in Optical Nodes, Line Extenders and Trunk Distribution Amplifiers for CATV Systems
* Driver Amplifier in Linear General Purpose Applications

Trackback :: http://datasheetblog.com/trackback/1720

댓글을 달아 주세요 Comment

Overview
The MC9RS08KA2 Series microcontroller unit (MCU) is an extremely low-cost, small pin count device for home appliances, toys, and small geometry applications.
This device is composed of standard on-chip modules including, a very small and highly efficient RS08 CPU core, 63 bytes RAM, 2K bytes Flash, an 8-bit modulo timer, keyboard interrupt, and analog comparator.
The device is available in small 6- and 8-pin packages.

Features
8-Bit RS08 Central Processor Unit (CPU)
* Simplified S08 instruction set with added high-performance instructions
- LDA, STA, and CLR instructions support the short addressing mode; address $0000 to $001F can be accessed via a single-byte instruction
- ADD, SUB, INC, and DEC instructions support the tiny addressing mode; address $0000 to $000F can be accessed via a single-byte instruction with reduced instruction cycle
- Shadow PC register instructions: SHA and SLA
* Pending interrupt indication
* Index addressing via D[X] and X register
* Direct page access to the entire memory map through paging window
Memory
* On-chip Flash EEPROM
- MC9RS08KA2: 2048 bytes
- MC9RS08KA1: 1024 bytes
* 63 bytes on-chip RAM
Power-Saving Modes
* Wait and stop
* Wakeup from power-saving modes using real-time interrupt (RTI), KBI, or ACMP
Clock Source
* ICS - Trimmable 20-MHz internal clock source
- Up to 10-MHz internal bus operation
- 0.2% trimmable resolution, 2% deviation over temperature and voltage range
System Protection
* Computer operating properly (COP) reset running off bus-independent clock source
* Low-voltage detection with reset or stop wakeup
Peripherals
* MTIM - 8-bit modulo timer
* ACMP - Analog comparator
- Full rail-to-rail supply operation
- Option to compare to fixed internal bandgap reference voltage
- Can operate in stop mode
* KBI - Keyboard interrupt ports
- Three KBI ports in 6-pin package
- Five KBI ports in 8-pin package
Development Support
* Background debug system
* Breakpoint capability to allow single breakpoint setting during in-circuit debug
Package Options
* 6-pin dual flat no lead (DFN) package
- Two general-purpose input/output (I/O) pins
- One general-purpose input pin
- One general-purpose output pin
* 8-pin plastic dual in-line pin (PDIP) package
- Four general-purpose input/output (I/O) pins
- One general-purpose input pin
- One general-purpose output pin
* 8-pin narrow body SOIC package
- Four general-purpose input/output (I/O) pins
- One general-purpose input pin
- One general-purpose output pin

MC9RS08KA2
MC9RS08KA1

Trackback :: http://datasheetblog.com/trackback/1667

댓글을 달아 주세요 Comment

Designed for broadband commercial and industrial applications with frequencies up to 1000 MHz. The high gain and broadband performance of these devices make them ideal for large-signal, common-source amplifier applications in 26 volt base station equipment.

• Typical Performance at 945 MHz, 26 Volts
Output Power - 60 Watts PEP
Power Gain - 18.0 dB
Efficiency - 40% (Two Tones)
IMD - -31.5 dBc
• Capable of Handling 5:1 VSWR, @ 26 Vdc, 945 MHz, 60 Watts CW Output Power

Features
• Excellent Thermal Stability
• Characterized with Series Equivalent Large-Signal Impedance Parameters
• Integrated ESD Protection
• 200C Capable Plastic Package
• N Suffix Indicates Lead-Free Terminations. RoHS Compliant.
• TO-270-2 Available in Tape and Reel. R1 Suffix = 500 Units per 24 mm, 13 inch Reel.
• TO-272-2 Available in Tape and Reel. R1 Suffix = 500 Units per 44 mm, 13 inch Reel.

MRF9060NR1
MRF9060NBR1

Trackback :: http://datasheetblog.com/trackback/1444

댓글을 달아 주세요 Comment

Designed for Class A or Class AB general purpose applications with frequencies from 1600 to 2200 MHz. Suitable for analog and digital modulation and multipurpose amplifier applications.
• Typical Two-Tone Performance @ 2170 MHz: VDD = 28 Volts, IDQ = 130 mA, Pout = 10 Watts PEP
Power Gain - 15.5 dB
Drain Efficiency - 36%
IMD - -34 dBc
• Typical 2-Carrier W-CDMA Performance: VDD = 28 Volts, IDQ = 130 mA, Pout = 1 Watt Avg., Full Frequency Band (2130-2170 MHz), Channel Bandwidth = 3.84 MHz. PAR = 8.5 dB @ 0.01% Probability
Power Gain - 15.5 dB
Drain Efficiency - 15%
IM3 @ 10 MHz Offset - -47 dBc in 3.84 MHz Channel Bandwidth
ACPR @ 5 MHz Offset - -49 dBc in 3.84 MHz Channel Bandwidth
• Typical Single - Carrier N-CDMA Performance: VDD = 28 Volts, IDQ = 130 mA, Pout = 1 Watt Avg., Full Frequency Band (1930 -1990 MHz), IS-95 (Pilot, Sync, Paging, Traffic Codes 8 through 13), Channel Bandwidth = 1.2288 MHz. PAR = 9.8 dB @ 0.01% Probability on CCDF.
Power Gain - 15.5 dB
Drain Efficiency- 16% ACPR @ 885 kHz Offset = -60 dBc in 30 kHz Bandwidth
• Typical GSM EDGE Performance: VDD = 28 Volts, IDQ = 130 mA, Pout = 4 Watts Avg., Full Frequency Band (1805 -1880 MHz)
Power Gain - 16 dB
Drain Efficiency - 33%
EVM - 1.3% rms
• Capable of Handling 5:1 VSWR, @ 28 Vdc, 2000 MHz, 10 Watts CW Output Power

Features
• Characterized with Series Equivalent Large-Signal Impedance Parameters
• Internally Matched for Ease of Use
• Qualified Up to a Maximum of 32 VDD Operation
• Integrated ESD Protection
• 200°C Capable Plastic Package
• RoHS Compliant
• In Tape and Reel. R1 Suffix = 500 Units per 24 mm, 13 inch Reel.

MRF6S20010GNR1

Trackback :: http://datasheetblog.com/trackback/1322

댓글을 달아 주세요 Comment

Features
• Specified for up to 132 -Channel Loading
• Excellent Distortion Performance
• Superior Gain, Return Loss and DC Current Stability over Temperature
• Silicon Bipolar Transistor Technology
• Unconditionally Stable Under All Load Conditions

Applications
• CATV Systems Operating in the 40 to 870 MHz Frequency Range
• Single Module High Gain Line Amplifier in Cable TV Distribution System

Description
• 24 Vdc Supply, 40 to 870 MHz, CATV High Gain Forward Amplifier Module
• Replaced MHW8342. There are no form, fit or function changes with this part replacement.
• RoHS Compliant

Trackback :: http://datasheetblog.com/trackback/1225

댓글을 달아 주세요 Comment


The Motorola MPX4100 series Manifold Absolute Pressure (MAP) sensor for engine
control is designed to sense absolute air pressure within the intake manifold. This
measurement can be used to compute the amount of fuel required for each cylinder. The
small form factor and high reliability of on–chip integration makes the Motorola MAP
sensor a logical and economical choice for automotive system designers.

Features
• 1.8% Maximum Error Over 0° to 85°C
• Specifically Designed for Intake Manifold Absolute Pressure Sensing in Engine
Control Systems
• Ideally Suited for Microprocessor Interfacing
• Patented Silicon Shear Stress Strain Gauge
• Temperature Compensated Over –40°C to +125°C
• Durable Epoxy Unibody Element
• Ideal for Non–Automotive Applications Application Examples
• Manifold Sensing for Automotive Systems

The MPX4100 series piezoresistive transducer is a state– of–the–art, monolithic, signal conditioned, silicon pressure sensor. This sensor, with its patented transducer, combines
advanced micromachining techniques, thin film metallization, and bipolar semiconductor processing to provide an accurate, high level analog output signal that is proportional
to applied pressure.
Figure 1 shows a block diagram of the internal circuitry integrated on a pressure sensor chip.

Trackback :: http://datasheetblog.com/trackback/1196

댓글을 달아 주세요 Comment

The MPVZ5010G series piezoresistive transducers are state-of-the-art monolithic silicon pressure sensors designed for the appliance, consumer, healthcare, industrial and automotive market. The analog output can be read directly into the A/D input of Freescale microcontrollers. This transducer combines advanced micromachining techniques, thin-film metallization, and bipolar processing to provide an accurate, high level analog output signal that is proportional to the applied pressure. The axial port has been modified to accommodate industrial grade tubing.

Features
* 5.0% Maximum Error over 0° to 85°C
* Temperature Compensated over -40° to +125°C
* Durable Thermoplastic (PPS) Package
* Available in Surface Mount (SMT) or Through-hole (DIP) Configurations

Application Examples
* Washing Machine Water Level Measurement (Reference AN1950)
* Ideally Suited for Microprocessor or Microcontroller-Based Systems
* Appliance Liquid Level and Pressure Measurement
* Respiratory Equipment

MPVZ5010GW6U
MPVZ5010GW7U
MPVZ5010G6U
MPVZ5010G6T1
MPVZ5010G7U

Trackback :: http://datasheetblog.com/trackback/1088

댓글을 달아 주세요 Comment


Features
* Specified for 77 - and 110-Channel Loading
* Excellent Distortion Performance
* Silicon Bipolar Transistor Technology
* Unconditionally Stable Under All Load Conditions

Applications
* CATV Systems Operating in the 40 to 750 MHz Frequency Range
* Output Stage Amplifier in Optical Nodes, Line Extenders and Trunk Distribution Amplifiers for CATV Systems
* Driver Amplifier in Linear General Purpose Applications

Description
* 24 Vdc Supply, 40 to 750 MHz, CATV Forward Power Doubler Amplifier Module
* Replaced MHW7185C. There are no form, fit or function changes with this part replacement.
* RoHS Compliant



 

Trackback :: http://datasheetblog.com/trackback/991

댓글을 달아 주세요 Comment

The 33926 is a monolithic H-Bridge Power IC designed primarily for automotive electronic throttle control, but is applicable to any low-voltage DC servo motor control application within the current and voltage limits stated in this specification.
The 33926 is able to control inductive loads with currents up to 5.0 A peak. RMS current capability is subject to the degree of heatsinking provided to the device package. Internal peak-current limiting (regulation) is activated at load currents above 6.5 A ± 1.5 A. Output loads can be pulse width modulated (PWM’ed) at frequencies up to 20 kHz. A load current feedback feature provides a proportional (0.24% of the load current) current output suitable for monitoring by a microcontroller’s A/D input. A Status Flag output reports undervoltage, overcurrent, and overtemperature fault conditions.
Two independent inputs provide polarity control of two half-bridge totem-pole outputs. Two independent disable inputs are provided to force the H-Bridge outputs to tri-state (high impedance off-state). An invert input changes the IN1 and IN2 inputs to LOW = true logic.

Features
•8.0 V to 28 V Continuous Operation (Transient Operation from 5.0 V to 40 V)
•225 mΩ maximum RDS(ON) @ 150°C (each H-Bridge MOSFET)
•3.0 V and 5.0 V TTL / CMOS Logic Compatible Inputs
•Overcurrent Limiting (Regulation) via Internal Constant-Off-Time PWM
•Output Short Circuit Protection (Short to VPWR or Ground)
•Temperature-Dependant Current-Limit Threshold Reduction
•All Inputs have an Internal Source/Sink to Define the Default (Floating Input) States
•Sleep Mode with Current Draw < 50 μA (with Inputs Floating or Set to Match Default Logic States)
•Pb-Free Packaging Designated by Suffix Code PNB

Trackback :: http://datasheetblog.com/trackback/925

댓글을 달아 주세요 Comment


Designed for broadband commercial and industrial applications with frequencies up to 1000 MHz. The high gain and broadband performance of these devices make them ideal for large - signal, common- source amplifier applications in 26 volt base station equipment.

• Typical Single-Carrier N-CDMA Performance @ 880 MHz, VDD = 26 Volts, IDQ = 950 mA, Pout = 20 Watts Avg., IS-95 CDMA (Pilot, Sync, Paging, Traffic Codes 8 Through 13) Channel Bandwidth = 1.2288 MHz. PAR = 9.8 dB @ 0.01% Probability on CCDF. Power Gain — 19.5 dB
Drain Efficiency — 28% ACPR @ 750 kHz Offset — -46.8 dBc in 30 kHz Bandwidth
• Capable of Handling 10:1 VSWR, @ 26 Vdc, 880 MHz, 100 Watts CW Output Power

Features
• Characterized with Series Equivalent Large-Signal Impedance Parameters
• Internally Matched for Ease of Use
• Qualified Up to a Maximum of 32 VDD Operation
• Integrated ESD Protection
• 200°C Capable Plastic Package
• N Suffix Indicates Lead-Free Terminations. RoHS Compliant.
• In Tape and Reel. R1 Suffix = 500 Units per 44 mm, 13 inch Reel.


MRF5S9100NR1
MRF5S9100NBR1

Trackback :: http://datasheetblog.com/trackback/897

댓글을 달아 주세요 Comment