Features
* Schottky Barrier Chip
* Guard Ring Die Construction for
* Transient Protection
* Low Power Loss, High Efficiency
* High Surge Capability
* High Current Capability and Low Forward Voltage Drop
* For Use in Low Voltage, High Frequency Inverters, Free
Wheeling, and Polarity Protection Applications
* Lead Free Finish, RoHS Compliant (Note 4)

Mechanical Data
* Case: TO-220AB
* Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0
* Moisture Sensitivity: Level 1 per J-STD-020C
* Terminals: Finish – Bright Tin. Solderable per MIL-STD-202, Method 208
* Polarity: As Marked on Body
* Marking: Type Number
* Weight: 2.24 grams (approx.)

MBR2535CT MBR2545CT MBR2550CT MBR2560CT

Trackback :: http://datasheetblog.com/trackback/662

댓글을 달아 주세요 Comment

Features
* Epitaxial Planar Die Construction
* Complementary PNP Types Available (DDTA)
* Built-In Biasing Resistors, R1R2
* Lead Free/RoHS Compliant (Note 1)
* "Green" Device, Note 2 and 3

Mechanical Data
* Case: SC-59
*Case Material: Molded Plastic, "Green" Molding Compound, Note 3. UL Flammability Classification
* Rating 94V-0
* Moisture Sensitivity: Level 1 per J-STD-020C
* Terminals: Solderable per MIL-STD-202, Method 208
* Lead Free Plating (Matte Tin Finish annealed over Copper leadframe).
* Terminal Connections: See Diagram
* Marking: Date Code and Type Code (See Table Below & Page 3)
* Ordering Information (See Page 3)
* Weight: 0.006 grams (approximate)

DDTC113ZKA
DDTC123YKA
DDTC123JKA
DDTC143XKA
DDTC143FKA
DDTC143ZKA
DDTC114YKA
DDTC114WKA
DDTC124XKA
DDTC144VKA
DDTC144WKA

Trackback :: http://datasheetblog.com/trackback/621

댓글을 달아 주세요 Comment

Features
· Epitaxial Planar Die Construction
· Complementary NPN Type Available (DMMT5551)
· Ideal for Low Power Amplification and Switching
· Intrinsically Matched PNP Pair (Note 1)
· 2% Matched Tolerance, hFE, VCE(SAT), VBE(SAT)
· Lead Free/RoHS Compliant (Note 4)
· "Green" Device, Note 5 and 6

Mechanical Data
· Case: SOT-26
· Case Material: Molded Plastic, "Green" Molding Compound, Note 7. UL Flammability Classification Rating 94V-0
· Moisture Sensitivity: Level 1 per J-STD-020C
· Terminal Connections: See Diagram
· Terminals: Solderable per MIL-STD-202, Method 208
· Lead Free Plating (Matte Tin Finish annealed over Copper leadframe).
· Marking (See Page 2): K4S
· Order & Date Code Information: See Page 2
· Weight: 0.006 grams (approximate)

DMMT5401-7-F

Trackback :: http://datasheetblog.com/trackback/618

댓글을 달아 주세요 Comment

Features
• Output Voltage: 3.3V, 5V, 12V and Adjustable Output Version
• Adjustable Version Output Voltage Range, 1.23V to 18V+4%
• 150KHz +15% Fixed Switching Frequency
• Voltage Mode Non-Synchronous PWM Control
• Thermal-Shutdown and Current-Limit Protection
• ON/OFF Shutdown Control Input
• Operating Voltage can be up to 22V
• Output Load Current: 3A
• TO220-5L, TO263-5L Packages
• Low Power standby mode
• Built-in Switching Transistor On Chip
• Lead Free Finish/RoHS Compliant (Note 1)

General Description
 The AP1506 series are monolithic IC designed for a step-down DC/DC converter, and own the ability of driving a 3A load without external transistor. Due to reducing the number of external component, the board space can be saved easily. The external shutdown function can be controlled by logic level and then come into standby mode. The internal compensation makes feedback control have good line and load regulation without external design. Regarding protected function, thermal shutdown is to prevent over temperature operating from damage, and current limit is to prevent over current operating of the output switch. If current limit function occurred and VFB is down to 0.5V below, the switching frequency will be reduced.

 The AP1506 series operate at a switching frequency of 150KHz thus allowing smaller sized
filter components than what would be needed with lower frequency switching regulators. Other features include a guaranteed +4% tolerance on output voltage under specified input voltage and output load conditions, and +15% on the oscillator frequency. The output version included fixed 3.3V, 5V, 12V, and an adjustable type. The packages are available in a standard 5-lead TO-220 or a 5-lead TO-263.

Applications
• Simple High-Efficiency Step-Down Regulator
• On-Card Switching Regulators
• Positive to Negative Converter

AP1506-12T5L-U
AP1506-33T5L-U
AP1506-50T5L-U
AP1506-12K5L-U
AP1506-33K5L-U
AP1506-50K5L-U
AP1506-12T5RL-U
AP1506-33T5RL-U
AP1506-50T5RL-U
AP1506-12T5L-13
AP1506-33T5L-13
AP1506-50T5L-13
AP1506-12K5L-13
AP1506-33K5L-13
AP1506-50K5L-13
AP1506-12T5RL-13
AP1506-33T5RL-13
AP1506-50T5RL-13


Trackback :: http://datasheetblog.com/trackback/617

댓글을 달아 주세요 Comment

Features
· Glass Passivated Die Construction
· Low Reverse Leakage Current
· Low Power Loss, High Efficiency
· Surge Overload Rating to 400A Peak
· Metal Base for Maximum Heat Dissipation
· Case to Terminal Isolation Voltage 1500V
· UL Listed Under Recognized Component Index, File Number
E94661
· Lead Free Finish, RoHS Compliant (Note 4)

Mechanical Data
· Case: GBPC / GBPC-W
· Case Material: Molded Plastic with Heatsink Internally
Mounted in the Bridge Encapsulation. UL Flammability
Classification Rating 94V-0
· Moisture Sensitivity: Level 1 per J-STD-020C
· Terminals: Finish ¾ Silver. Plated Leads Solderable per
MIL-STD-202, Method 208
· Polarity: As Marked on Case
· Mounting: Through Hole for #10 Screw
· Mounting Torque: 8.0 Inch-pounds Maximum
· Ordering Information: See Last Page
· Marking: Type Number
· GBPC Weight: 20 grams (approximate)
· GBPC-W Weight: 14 grams (approximate)

GBPC35005W GBPC3510 GBPC3510W GBPC3501W GBPC3501 GBPC3502 GBPC3502W
GBPC3504 GBPC3504W GBPC3506 GBPC3506W GBPC3508 GBPC3508W

Trackback :: http://datasheetblog.com/trackback/579

댓글을 달아 주세요 Comment

Features
- Micropower operation
- Operation with magnetic field of either north or south pole (omnipolar)
- 2.5V to 5.5V battery operation
- Chopper stabilized
- Superior temperature stability
- Good RF noise immunity
- 40°C to 85°C operating temperature
- SIP-3L/SC59-3L/Low profile DFN2020-6 package
- ESD (HBM) > 5KV for DFN2020-6
                   > 6KV for SIP-3L and SC59-3L
- Lead Free Finish/RoHS Compliant for Lead Free products (Note 1)
- Green Packages: SC59-3L, DFN2020-6
- Lead Free Package: SIP-3L

General Description
 AH180 is comprised of two Hall effect plates and an open-drain output driver, mainly designed for battery-operation, hand-held equipment (such as Cellular and Cordless Phone, PDA). The
total power consumption in normal operation is typically 24µW with a 3V power source.
Either north or south pole of sufficient strength will turn the output on. The output will be turned off under no magnetic field. While the magnetic flux density (B) is larger than operating point (Bop), the output will be turned on (low), the output is held until B is lower than release point (Brp), then turned off.

Applications
- Cover switch in clam-shell cellular phones
- Cover switch in Notebook PC/PDA
- Contact-less switch in consumer products °C

AH180-P AH180-W AH180-SN AH180-PL-A AH180-WL-A AH180-SNL-A AH180-PG-A
AH180-WG-A AH180-SNG-A AH180-PL-B-7 AH180-WL-B-7 AH180-SNL-B-7
AH180-PG-B-7 AH180-WG-B-7 AH180-SNG-B-7

Trackback :: http://datasheetblog.com/trackback/574

댓글을 달아 주세요 Comment

Features
• Bipolar Hall Effect Latch Sensor
• 3.5V to 20V DC Operation Voltage
• Open Collector Pre-Driver
• 25mA Output Sink Current
• Chip Power Reverse-Connection Protection
• Operating Temperature: -40oC~150oC
• Lead Free Finish/RoHS Compliant for Lead Free
products (Note 1)
• Lead Free Packages: SIP-3L, SC59-3L
• Green Package: SC59-3L

General Description
 AH175 is a single-digital-output Hall-effect sensor for high temperature operation. The device includes an on-chip Hall voltage generator for magnetic sensing, an amplifier to amplify Hall voltage, and a comparator to provide switching hysteresis for noise rejection, and an open-collector output pre-driver. An internal band-gap regulator is used to provide temperature
compensated supply voltage for internal circuits and allows a wide operating supply range.

 While the magnetic flux density (B) is larger than threshold Bop, the OUT pin turns on (low). If B removed toward Brp, the OUT pin is latched “on” state prior to B < Brp. When B < Brp, the OUT pin goes into “off ” state.

Applications
• Rotor Position Sensing
• Current Switch
• Encoder
• RPM Detection

AH175-PL-7-A AH175-WL-7-A AH175-PG-7-A AH175-WG-7-A AH175-PL-B-A AH175-WL-B-A
AH175-PG-B-A AH175-WG-B-A AH175-PL-A-A AH175-WL-A-A AH175-PG-A-A AH175-WG-A-A AH175-PL-7-B AH175-WL-7-B AH175-PG-7-B AH175-WG-7-B AH175-PL-B-B AH175-WL-B-B AH175-PG-B-B AH175-WG-B-B AH175-PL-A-B AH175-WL-A-B AH175-PG-A-B AH175-WG-A-B

Trackback :: http://datasheetblog.com/trackback/569

댓글을 달아 주세요 Comment

Features
• Bipolar Hall Effect Latch Sensor
• 3V to 20V DC Operation Voltage
• Built-in Pull-Up Resistor
• 25mA Output Sink Current
• Operating Temperature: C 125 ~ C 40 ° + ° −
• Lead Free Finish/RoHS Compliant for Lead Free products
• Lead Free Package: SIP-3L, SC59-3L
• Green Package: SC59-3L

General Description
AH173 is a single-digital-output Hall-effect sensor with pull-up resistor for high temperature operation. The device includes an on-chip Hall voltage generator for magnetic sensing, an amplifier to amplify Hall voltage, and a comparator to provide switching hysteresis for noise rejection, and an output driver with a pull-up resistor (Rpu). An internal band-gap regulator is used to provide temperature compensated supply voltage for internal circuits and allows a wide operating supply range. While the magnetic flux density (B) is larger than operate point (Bop), the OUT pin turns on (low). If B moves toward release point (Brp), the OUT pin is latched “on” state prior to B < Brp. When B < Brp, the OUT pin goes into “off ” state.

Applications
• Rotor Position Sensing
• Current Switch
• Encoder
• RPM Detection

AH173-P AH173-W  AH173-PL7-A AH173-WL7-A AH173-PG7-A AH173-WG7-A AH173-PLA-A
AH173-WLA-A AH173-PGA-A AH173-WGA-A AH173-PLB-A AH173-WLB-A AH173-PGB-A
AH173-WGB-A AH173-PL7-B AH173-WL7-B AH173-PG7-B AH173-WG7-B AH173-PLA-B
AH173-WLA-B AH173-PGA-B AH173-WGA-B AH173-PLB-B AH173-WLB-B AH173-PGB-B
AH173-WGB-B

Trackback :: http://datasheetblog.com/trackback/548

댓글을 달아 주세요 Comment

Features
· Fast Switching Speed
· Surface Mount Package Ideally Suited for Automatic Insertion
· For General Purpose Switching Applications
· High Conductance

Mechanical Data
· Case: SOT-23, Molded Plastic
· Case material - UL Flammability Rating Classification 94V-0
· Moisture sensitivity: Level 1 per J-STD-020A
· Terminals: Solderable per MIL-STD-202, Method 208
· Polarity: See Diagram
· Marking: KJE (See Page 2)
· Weight: 0.008 grams (approx.)


BAV99-7
TAG Diode

Trackback :: http://datasheetblog.com/trackback/60

댓글을 달아 주세요 Comment