General Description
 The AP393A consists of two independent precision voltage comparators with an offset voltage specification as low as 8.0mV max for two comparators which were designed specifically to operate from a single power supply over a wide range of voltages.
Operation from split power supplies is also possible and the low power supply current drain is independent of the magnitude of the power supply voltage.
These comparators also have a unique characteristic in that the input common-mode voltage range includes ground, even though operated from a single power supply voltage.
Application areas include limit comparators, simple analog to digital converters; pulse, square wave and time delay generators; wide range VCO; MOS clock timers; multivibrators and high voltage digital logic gates.
The AP393A is designed to directly interface with TTL and CMOS.
When operated from both plus and minus power supplies, the AP393A will directly interface with MOS logic where their low power drain is a distinct advantage over standard comparators.

Features
* Wide supply
  Voltage range: 2.0V to 36V
  Single or dual supplies: ±1.0V to ±18V
* Very low supply current drain (0.4mA) – independent of supply voltage
* Low input biasing current: 150nA
* Low input offset current: ±70nA
* Low input offset voltage: ±4mV
* Input common-mode voltage range includes ground
* Differential input voltage range equal to the power supply voltage
* Low output saturation voltage: 250mV at 4mA
* Output voltage compatible with TTL, DTL, ECL, MOS and CMOS logic systems
* MSOP-8L and SOP-8L: Available in “Green” Molding Compound (No Br, Sb)
* Lead Free Finish/ RoHS Compliant (Note 1)

Applications
* High precision comparators
* Reduced VOS drift over temperature
* Eliminates need for dual supplies
* Allows sensing near ground
* Compatible with all forms of logic
* Power drain suitable for battery operation

AP393AM8G-U
AP393AM8G-13
AP393ASG-U
AP393ASG-13

Trackback :: http://datasheetblog.com/trackback/1754

댓글을 달아 주세요 Comment

Features
• Ultra Low Forward Voltage Drop
• Excellent High Temperature Stability
• Patented Super Barrier Rectifier Technology
• Soft, Fast Switching Capability
• 150ºC Operating Junction Temperature
• Lead Free By Design, RoHS Compliant (Note 1)
• “Green” Molding Compound (No Br, Sb)

Mechanical Data
• Case: DFN1411-3
• Case Material: Molded Plastic, “Green” Molding Compound. UL Flammability Classification Rating 94V-0
• Moisture Sensitivity: Level 1 per J-STD-020C
• Terminal Connections: See Diagram
• Terminals: Finish - Matte Tin annealed over Copper lead frame. Solderable per MIL-STD-202, Method 208
• Marking Information: See Page 3
• Ordering Information: See Page 3
• Weight: TBD grams (approximate)

SBR1U40LP-7

Trackback :: http://datasheetblog.com/trackback/1450

댓글을 달아 주세요 Comment

AP7217 - 500mA CMOS LDO

Diodes 2008/01/31 10:12
Features
• Very Low Dropout Voltage
• Low Current Consumption: Typ. 50μA
• Output Voltage: 3.3V
• Guaranteed 500mA (min) Output
• Input Range up to 5.5V
• Current Limiting
• Stable with either electrolytic capacitor or low-ESR
MLCC (multi-layer ceramic capacitor) Low
Temperature Coefficient
• SOP-8L: Available in “Green” Molding Compound
(no Br, Sb)
• Lead Free Finish / RoHS Compliant

General Description
The AP7217 low-dropout linear regulator operates from a 3.3V to 5.5V supply and delivers a guaranteed 500mA (min) continuous load current.
The high-accuracy output voltage is preset to an internally trimmed voltage. An active-low open-drain reset output remains asserted for at least 20ms (TYP) after output voltage reaches VDF.
The space-saving SOP-8L package is suitable for “pocket” and hand-held applications.

Applications
• HD/BlueRay DVD & MP3/4 Players
• Mobile Handsets and Smartphones
• Digital Still Camera
• Hand-Held Computers

AP7217-33SG-13
AP7217-33SG-U
TAG CMOS, LDO

Trackback :: http://datasheetblog.com/trackback/1316

댓글을 달아 주세요 Comment

Features
• Micropower operation
• Operation with North or South Pole
• 1.65 to 3.3V battery operation
• Chopper stabilized
• Superior temperature stability
• Extremely Low Switch-Point Drift
• Insensitive to Physical Stress
• Good RF noise immunity
• -40°C to 85°C operating temperature
• ESD > 4KV in human body mode
• SOT553: Available in “Green” Molding Compound (no Br, Sb)
• Lead Free Finish/RoHS Compliant (Note 1)

General Description
AH1883 is with two Hall effect plates and a CMOS output driver, mainly designed for battery–powered, hand-held equipment (such as Cellular and Cordless Phone, PDA). The total operation power is down to 15uW in the 1.8V supply.
Either north or south pole of sufficient strength will turn the output on. The output will be turned off under no magnetic field.
While the magnetic flux density (B) is larger than operate point (Bop), the output will be turned on (low), the output is held until B is lower than release point (Brp), then turned off.

Applications
• Cellular phone
• PDA
• Cordless phone

AH1883-Z

Trackback :: http://datasheetblog.com/trackback/1232

댓글을 달아 주세요 Comment

Features
• Micropower operation
• Operation with North or South Pole
• 1.65 to 3.3V battery operation
• Chopper stabilized
• Superior temperature stability
• Extremely Low Switch-Point Drift
• Insensitive to Physical Stress
• Good RF noise immunity
• -40°C to 85°C operating temperature
• ESD > 4KV in human body mode
• SOT553: Available in “Green” Molding Compound (No Br, Sb)
• Lead Free Finish/RoHS Compliant (Note 1)

General Description
AH1885 is with two Hall effect plates and dual CMOS output driver, mainly designed for battery–powered, hand-held equipment (such as Cellular and Cordless Phone, PDA). The total operation power is down to 15uW in the 1.8V supply. Either north or south pole of sufficient strength will turn the output1 on. The output1 will be turned off under no magnetic field.
While the magnetic flux density (B) is larger than operate point (Bop), the output1 will be turned on (low), the output1 is held until B is lower than release point (Brp), then turned off.

Applications
• Cellular phone
• PDA
• Cordless phone

AH1885-Z


Trackback :: http://datasheetblog.com/trackback/1127

댓글을 달아 주세요 Comment

Features
• 1.3V Maximum Dropout at Full Load Current
• Fast Transient Response
• Output Current Limiting
• Built-in Thermal Shutdown
• Good Noise Rejection
• 3-Terminal Adjustable or Fixed 1.8V, 2.5V, 3.3V
• SOT223-3L and TO252-3L, Packages in “Green”
Molding Compound (No Br, Sb)
• Lead Free Finish / RoHS Compliant (Note 1)

General Description
APX1117 is a low dropout positive adjustable or fixed-mode voltage regulator with 1A output current capability. The product is specifically designed to provide well-regulated supply for
applications such as high-speed bus termination and low current 3.3V logic supply. APX1117 is also well suited for other applications such as VGA cards. APX1117 is guaranteed to have lower than 1.3V dropout at full load current making it ideal to provide well-regulated outputs of 1.25V to 5.0V with 6.3V to 18V input supply

Applications
• PC Peripheral
• Communication

APX1117E
APX1117D

Trackback :: http://datasheetblog.com/trackback/873

댓글을 달아 주세요 Comment

Features
Low On-Resistance: RDS(ON)
Low Gate Threshold Voltage
Low Input Capacitance
Fast Switching Speed
Low Input/Output Leakage
Lead Free By Design/RoHS Compliant (Note 2)
ESD Protected up to 2KV
"Green" Device (Note 4)
Qualified to AEC-Q101 standards for High Reliability

Mechanical Data
Case: SOT-23
Case Material: Molded Plastic, “Green” Molding Compound. UL Flammability Classification Rating 94V-0
Moisture sensitivity: Level 1 per J-STD-020C
Terminals: Finish --Matte Tin annealed over Alloy 42 leadframe. Solderable per MIL-STD-202, Method 208
Terminal Connections: See Diagram
Marking: See Last Page
Ordering & Date Code Information: See Last Page
Weight: 0.008 grams (approximate)

DMN2004K-7

Trackback :: http://datasheetblog.com/trackback/764

댓글을 달아 주세요 Comment

Features
• 300mA Low Dropout Regulator with EN
• Very low IQ: 40µA
• Wide input voltage range: 2V – 6V
• Adjustable output: 1V – 5V
• High PSRR: 65dB at 1kHz
• Ultra-fast start-up time: 25µs
• Stable with low ESR, 1µF ceramic output capacitor
• Excellent Load/Line Transient Response
• Low dropout: 350mV at 300mA
• Current limit protection
• Short circuit protection
• Thermal shutdown protection
• Ambient temperature range: -40ºC to 85°C
• SOT25 and DFN2020-6 (Preview): Available in
“Green” Molding Compound (No Br, Sb)

Description
 The AP133 is a 300mA, adjustable output voltage, low dropout linear regulator. The device included pass element, error amplifier, band-gap, current limit and thermal shutdown circuitry.
The device is turned on when EN pin is set to logic high level. The characteristics of low dropout voltage and less quiescent current make it good for low power applications, for example, battery powered devices.
 The typical quiescent current is approximately 40μA from zero to maximum load. Built-in current-limit and thermal-shutdown functions prevent IC from damage in fault conditions.
The AP133 is available in SOT25 and DFN2020-6 (preview) package.

Applications
• Cellular Phones
• Smart Phones, PDAs
• MP3/MP4
• Bluetooth head set
• Low power application

AP133-WG-7
AP133-SN-G-7


Trackback :: http://datasheetblog.com/trackback/730

댓글을 달아 주세요 Comment

Features
* Dual N-Channel MOSFET
* Low On-Resistance
* Low Gate Threshold Voltage
* Low Input Capacitance
* Fast Switching Speed
* Low Input/Output Leakage
* Ultra-Small Surface Mount Package
* Lead Free By Design/RoHS Compliant (Note 2)
* ESD Protected up to 2KV
* "Green" Device (Note 4)
* Qualified to AEC-Q101 standards for High Reliability

Mechanical Data
* Case: SOT-363
* Case Material: Molded Plastic, “Green” Molding Compound. UL Flammability Classification Rating 94V-0
* Moisture Sensitivity: Level 1 per J-STD-020C
* Terminals Connections: See Diagram
* Terminals: Finish - Matte Tin annealed over Alloy 42 leadframe. Solderable per MIL-STD-202, Method 208
* Marking: See Page 2
* Ordering & Date Code Information: See Page 2
* Weight: 0.006 grams (approximate)

DMN2004DWK-7

Trackback :: http://datasheetblog.com/trackback/707

댓글을 달아 주세요 Comment

Features
• Designed for VHF/UHF Amplifier Applications and High Output VHF Oscillators
• High Current Gain Bandwidth Product
• Ideal for Mixer and RF Amplifier Applications with collector currents in the 100μA - 30 mA Range
• Lead Free/RoHS Compliant (Note 3)

Mechanical Data
• Case: SOT-23 • Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0
• Moisture Sensitivity: Level 1 per J-STD-020C
• Terminals: Solderable per MIL-STD-202, Method 208
• Terminal Connections: See Diagram
• Lead Free Plating (Matte Tin Finish annealed over Alloy 42 leadframe).
• Marking Information: See Page 3
• Ordering Information: See Page 3
• Weight: 0.008 grams (approximate)

MMBTH24-7-F

Trackback :: http://datasheetblog.com/trackback/664

댓글을 달아 주세요 Comment