General Description
The AME8819 is a CMOS linear regulator. It operated from 2.5V to 5.5V input voltage and delivers up to 600mA output current. The AME8819 provide low quiescent current (70uA typ) low dropout voltage (Vout=3.3V, 540mV @ 600mA typ), and excellent PSRR, thus marking them ideal for Data-Communications and battery applications.
The AME8819 provide over temperature and over current protected functions. It is stable with an output capacitance of 2.2uF or larger.

Features
*Input voltage range is from 2.8V to 5.5V
*Output voltage range is from 1.8V to 4.5V
*Low Dropout: 540mV @ 600mA, VOUT = 3.3V
*Guaranteed 600mA Drive Current
*Factory Pre-set output voltage
*Only 2.2mF Output Capacitor Required for Stability (Low ESR MLCC is allowable)
*Provided OTP, current limit
*All AME’s Green Products Meet RoHS Standards

Applications
*Data-Communication
*Laptop, Palmtops, Notebook computers
*Battery Power Equipment
*Handheld Device
*PCMCIA Cards

AME8819AEFT180Z, AME8819AEFT250Z, AME8819AEFT300Z

GENERAL DESCRIPTION
The CAV414 is an universal multipurpose interface for capacitive sensors and contains the complete signal processing unit on chip. The CAV414 detects the relative capacitive change of a measuring capacity to a fixed reference capacity. The IC is optimised for capacities in the wide range of 10pF to 2nF with possible changes of capacity of 5% to 100% of the reference capacity.
The voltage output is formed by a high accuracy instrumentation amplifier in combination with an operational amplifier.
With only a few external components, the CAV414 is suitable for a great variety of applications including a zero compensation.

FEATURES
*Wide Supply Voltage Range: 6...35V
*Wide Operating Temperature Range: –40°C...+85°C
*High Detection Sensitivity of Relative Capacitive Changes: 5% – 100%
*Detection Frequency up to 2kHz
*Adjustable Voltage Range: 0...5/10V, other
*Reference Voltage Source: 5V
*Protection against Reverse Polarity
*Output Current Limitation
*Adjustable with only two Resistors

APPLICATIONS
*Industrial Process Control
*Distance Measurement
*Pressure Measurement
*Humidity Measurement
*Level Control

General Description
The AME41-ADJ is a micropower 3-terminal band-gap voltage regulator diode with a user adjustable output voltage. It operates over a 30mA to 20mA current range. Each circuit is trimmed at wafer sort to provide a ±0.50% initial tolerance. The design of the AME41-ADJ allows for a large range of load capacitances and operating currents. The low start-up current makes these parts ideal for battery applications.
AME offers this part in a TO-92 and SOP-8 packages as well as the space saving SOT-23.

Features
*Small Packages: SOT-23, TO-92, SOP-8
*Tolerates Capacitive Loads
*User Adjustable Reverse Breakdown Voltage
*Tight Voltage Tolerance ------- ±0.5%
*Wide Operating Current ------- 30mA to 20mA
*Wide Temperature Range ----- -40oC to +85oC
*Low Temperature Coefficient --100ppm/oC (max)
*Excellent Transient Response
*All AME's Lead Free Products Meet RoHS Standards

Applications
*Portable Electronics
*Power Supplies
*Computer Peripherals
*Data Acquisition Systems
*Battery Chargers
*Consumer Electronics

AME41BEET, AME41BEETZ, AME41BEAT, AME41BEAT-1

General Description
The AME1117 is a 1A low-dropout positive voltage regulator. It is available in fixed and adjustable output voltage versions. Overcurrent and thermal protection are integrated onto the chip. Output current will limit as while it reaches the pre-set current or temperature limit. The dropout voltage is specified at 1.4V Maximum at full rated output current. The AME1117 series provides excellent regulation over line, load and temperature variations.

Features
*Low Dropout Voltage ----- 1.4V at 1A
*Adjustable or Fixed Voltages: 1.8V, 2.5V, 3.3V, 5.0V
*Adjust Pin Current Less than 120mA
*Overcurrent Protection
*Thermal Protection
*Available in TO-220, TO-252, SOT-223
*All AME's Lead Free Products Meet RoHS Standards

Applications
*High Efficiency Linear Regulators
*Post Regulators for Switching Supplies
*5V to 3.3V Voltage Converter
*Battery Charger

AME1117ACBTZ, AME1117BCBTZ, AME1117CCBTZ, AME1117DCBTZ

GENERAL DESCRIPTION
The AM 336 is a bipolar monolithic integrated circuit designed for optical detection applications.
By adding an external photodiode, an IR LED, two PNP power transistors and a minimum of other parts, the AM 336 will be a complete optoelectronic interface (proximity and barrier) for a reflective optical proximity switch or for a light barrier with external synchronisation.

FEATURES
*2 Operation Modes (Proximity and Barrier)
*External Synchronisation in the Barrier Mode
*Ambient Light Rejection
*Adjustable Threshold and Hysteresis
*Normally Open and Normally Closed Outputs
*Driver for PNP Output Transistors with Short Circuit Protection
*LED Output 8 mA (Source and Sink)
*Adjustable Detection Distance and Hysteresis
*Dirt Indication in the Barrier Mode
*Internal Zener Diode for Voltage Stabilisation (optional)
*Maximum Supply Voltage only Depending on External Elements

APPLICATIONS
*Miniaturised One Way Light Barrier
*Miniaturised Reflection Light Barrier
*Frame Light Barrier

AM336-1, AM336-2

GENERAL DESCRIPTION
AM452 is an integrated transducer with an adjustable current output which has been specifically designed for the conditioning of differential input signals. It permits the independent adjustment of the offset and fullscale current using just a few components.
The IC consists of various functional modules. In addition to the instrumentation amplifier in the signal path there is an operational amplifier which is used to set the gain. The offset can be adjusted using the Zero adjust stage and/or the SET stage module.
An additional operational amplifier can supply external components. The adjustable current output stage permits 2- and 3-wire operation by way of a simple amendment to the circuitry.
The IC is distinguished by its many protective functions which include protection against reverse polarity and short-circuiting and also an internal current limit.

FEATURES
*Instrumentation amplifier input with a wide voltage range of ±400mV
*Adjustable gain and offset
*Adjustable current output (e.g. of 0/4...20mA)
*2- and 3-wire operation
*Suitable for HART® applications
*Protection against reverse polarity and short-circuiting
*Output signal limiting
*Integrated current source
*Adjustable integrated reference voltage source of 5 to 10V
*Modular configuration
*Supply voltage of 6...35V
*Temperature range of -40°C...+85°C
*RoHS compliant

TYPICAL APPLICATIONS
Transducers for differential input signals in current output values for:
*Transducers for sensor applications with an internal sensing element supply
*Drivers for the analog industrial power grid (e.g. remote display in current loop operation)
*Differential impedance converters
*Carrier for standard HART® protocol communications
*Modular signal conditioning with digital correction

General Description
The AME5170 is a fixed off-time step-up DC/DC converter in a small SOT-25 package. The AME5170 is ideal for LCD panels requiring low current and high efficiency as well as LED application for cellular phone backlighting, PDAs, and other hand-held devices. The low 400ns off time allows the use of tiny external components. AME5170 is designed to drive up to four white LEDs in series with a constant current from a single Li-lon battery. To control LED brightness, the LED current can be adjusted by applying a PWM (pulse width modulated) signal with a frequency range of 100Hz to 50KHz to the EN pin.

Features
*0.7W Internal Switch
*Use Small Surface Mount Components
*Adjust Output Voltage up to 28V
*Input under Voltage Lockout
*0.1mA Shutdown Current Typical
*Small SOT-25 Package
*All AME's Lead Free Products Meet RoHS Standards

Applications
*LCD Bias Supplies
*White LED Back-Lighting
*Handheld Devices
*Digital Cameras
*Portable Applications

AME5170AEEVADJZ, AME5170AEEVADJY

GENERAL DESCRIPTION
The AM 313 is a bipolar monolithic Integrated Circuit designed for proximity detection applications.
The function is based on the damping of an LC oscillator which switches a transistor and
LED output.

FEATURES
*Wide Supply Voltage Range from 4.75 to 35V
*Supply Current Without Oscillator typical 1mA
*Complementary Outputs with Short–Circuit Protection
*P–Type Drivers for PNP Bipolar and PMOS Transistors
*Adjustable Output Current From 100μA to 12mA
*Adjustable Detection Distance and Hysteresis
*Adjustable Temperature Compensation for Detection Distance
*Protection against False Polarity
*Power–On–Delay
*LED Output 4mA typical

General Description
The AME8841 linear regulator features low quiescent current (30mA typ.) with low dropout voltage, making it ideal for battery applications.
The space-saving SO-8 package is attractive for "Pocket” and "Hand Held" applications.
These rugged devices have both Thermal Shutdown, and Current Fold-back to prevent device failure under the "Worst" of operating conditions.
The AME8841 is stable with an output capacitance of 2.2mF or greater.

Features
*Very Low Dropout Voltage
*Guaranteed 600mA Output
*Accurate to within 1.5%
*30mA Quiescent Current
*Over-Temperature Shutdown
*Current Limiting
*Short Circuit Current Fold-back
*Power-Saving Shutdown Mode
*Space-Saving SO-8 Package
*Many fixed output voltages available
*Low Temperature Coefficient

Applications
*Instrumentation
*Portable Electronics
*Wireless Devices
*Cordless Phones
*PC Peripherals
*Battery Powered Widgets
*Electronic Scales

AME8841AEHA
AME8841BEHA
AME8841CEHA

General Description
The AME8844 family of positive, linear regulators feature low quiescent current (45mA typ.) with low dropout voltage, making them ideal for battery applications.
Output voltages are set at the factory and trimmed to 1.5% accuracy.
These rugged devices have both Thermal Shutdown, and Current Fold-back to prevent device failure under the "Worst" operating conditions.
An additional feature is a “Power Good” detector, which pulls low when the output is out of regulation.
The AME8844 is stable with an output capacitance of 4.7mF or greater.

Features
* All AME's Lead Free Products Meet RoHS Standards
* Very Low Dropout Voltage
* Guaranteed 750mA Output
* Accurate to within 1.5%
* 45mA Quiescent Current Typically
* Over-Temperature Shutdown
* Current Limiting
* Short Circuit Current Fold-back
* Noise Reduction Bypass Capacitor (Fixed Versions)
* Power-Saving Shutdown Mode
* Space-Saving MSOP-8 Package
* 6 Factory Pre-set Output Voltages
* Low Temperature Coefficient
* Adjustable Version
* Power Good Output Function.

Applications
* Instrumentation
* Portable Electronics
* Wireless Devices
* PC Peripherals
* Battery Powered Widgets