The AIC1529 is a quad high-side power switch for self-powered and bus-powered Universal Serial Bus (USB) applications. Both high-side switches are MOSFET with 110mW RDS(ON), which meets USB voltage drop requirements for maximum transmission wire length.
Multi-purpose open-drain fault flag output indicates over-current limiting, thermal shutdown, or undervoltage lockout for each channel. Output current is typically limited to 1.3A, and the thermal shutdown functions of the power switches independently control their channel under overcurrent condition.
Guaranteed minimum output rise time limits inrush current during hot plug-in as well as minimizing EMI and prevents the voltage at upstream port from dropping excessively.

*110mW (5V Input) High-Side MOSFET Switch.
*500mA Continuous Load Current per Channel.
*220μA Typical On-State Supply Current.
*1μA Typical Off-State Supply Current.
*Current-Limit / Short Circuit Protection.
*Thermal Shutdown Protection under Overcurrent Condition.
*Undervoltage Lockout Ensures that Switch is off at Start Up.
*Output can be Forced Higher than Input (Off-State).
*Open-Drain Fault Flag.
*Slow Turn ON and Fast Turn OFF.
*Enable Active-High or Active-Low.

*USB Power Management.
*Hot Plug-In Power Supplies.
*Battery-Charger Circuit.

AIC1529-0CNTR, AIC1529-1CNTR, AIC1529-0PNTR, AIC1529-1PNTR
TAG Power, Switch, USB

댓글을 달아 주세요 Comment

The ADXL327 is a small, low power, complete 3-axis accelerometer with signal conditioned voltage outputs. The product measures acceleration with a minimum full-scale range of ±2 g. It can measure the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration, resulting from motion, shock, or vibration.
The user selects the bandwidth of the accelerometer using the CX, CY, and CZ capacitors at the XOUT, YOUT, and ZOUT pins. Bandwidths can be selected to suit the application with a range of 0.5 Hz to 1600 Hz for X and Y axes and a range of 0.5 Hz to 550 Hz for the Z axis.
The ADXL327 is available in a small, low profile, 4 mm × 4 mm × 1.45 mm, 16-lead, plastic lead frame chip scale package (LFCSP_LQ).

*3-axis sensing
*Small, low profile package
-4 mm × 4 mm × 1.45 mm LFCSP
*Low power: 350 μA typical
*Single-supply operation: 1.8 V to 3.6 V
*10,000 g shock survival
*Excellent temperature stability
*Bandwidth adjustment with a single capacitor per axis
*RoHS/WEEE lead-free compliant

*Cost-sensitive, low power, motion- and tilt-sensing applications
-Mobile devices
-Gaming systems
-Disk drive protection
-Image stabilization
-Sports and health devices


댓글을 달아 주세요 Comment

The ANADIGICS ACA2604 amplifier for Fiber-to-the-Home (FTTH) applications is intended to be used in conjunction with the triplexer in fiber-coax line terminals. The device is driven by, and amplifies the output of, the video downstream path photodiode.
The high-impedance input of the ACA2604 eliminates the need for a costly transformer usually needed to interface to the photodiode, and a low equivalent input noise level offers excellent sensitivity. The device provides sufficient linearity to maintain low CTB and CSO levels in full-bandwidth (132 channel) systems, even across a wide gain adjustment range.
The ACA2604 is manufactured using ANADIGICS’s proven MESFET technology that offers state-of-theart reliability, temperature stability and ruggedness. The device operates from a single +5 V supply and is offered in a 5 mm x 5 mm x 1 mm surface mount package.

*50 - 870 MHz Operating Frequency
*High Linearity: 65 dBc CTB/CSO (79 Chan.)
*Low Equivalent Input Noise: 4.5 pA/rtHz
*22 dB Gain Adjust
*400  Differential Input Impedance: No Transformer Required for Interface to Photodiode
*Single +5 V Supply
*5 mm x 5 mm x 1 mm Surface Mount Package
*RoHS Compliant Package
*Pin Compatible with the ACA2601

*FTTH RF Amplifier Used in Conjunction With Triplexer in Fiber-Coax Line Terminals

TAG Amplifier, RF

댓글을 달아 주세요 Comment

General Description
The AP2014 controller IC is designed to provide a low cost synchronous Buck regulator for on-board DC to DC converter applications. With the migration of today’s ASIC products requiring low supply voltages such as 1.8V and lower, together with currents in excess of 3A, traditional linear regulators are simply too lossy to be used when input supply is 5V or even in some cases with 3.3V input supply. The AP2014 together with dual N-channel MOSFETs such as AF9410, provide a low cost solution for such applications. This device features an internal 200KHz oscillator (400KHz for "A" version), under-voltage lockout for both Vcc and Vc supplies, an external programmable soft-start function as well as output under-voltage detection that latches off the device when an output short is detected.

*Synchronous Controller in 8-Pin Package
*Operating with single 5V or 12V supply voltage
*Internal 200KHz Oscillator (400KHz for AP2014A)
*Soft-Start Function
*Fixed Frequency Voltage Mode
*500mA Peak Output Drive Capability
*Protects the output when control FET is shorted
*SOP-8L/PDIP-8L Pb-Free package

*Graphic Card
*Hard Disk Drive
*DDR memory source sink Vtt application
*Low cost on-board DC to DC such as 5V to 3.3V, 2.5V or 1.8V

AP2014A, AP2014S, AP2014-AS, AP2014N, AP2014-AN

댓글을 달아 주세요 Comment

Peripheral Imaging Corporation's HSN series is family of self-scanning photodiode solid-state linear imaging arrays. These photodiode sensors employ PIC’s proprietary CMOS Image Sensing Technology to integrate the sensors into a single monolithic chip. These sensors are optimally designed for applications in spectroscopy. Accordingly, these sensors contain a linear array of photodiodes with an optimized geometrical aspect ratio (25-μm aperture pitch x 2500-μm aperture width) for helping to maintain mechanical stability in spectroscopic instruments and for providing a large light-capturing ability. The family of sensors consists of photodiode arrays of various lengths, 256, 512, and 1024 pixels.
The HSN photodiode arrays are mounted in 22-pin ceramic side-brazed dual-in-line packages that fit in standard DIP sockets. A diagram of its pinout configuration is seen in Figure 1.

*Selectable saturation charge capacities. 65-pC capacity for wider dynamic range. 25-pC for lower noise readout.
*Wide spectral response (180 – 1000 nm) for UV and IR response.
*NP junction photodiodes with superior resistance to UV damage.
*Low dark current.
*Integration time up to 11 seconds at room te mperature.
*Integration time extended to hours by cooling.
*Anti-blooming circuitry.
*High linearity.
*Low power dissipation (less than 1 mW).
*Geometrical structure for enhanced stability and registration.
*Standard 22-lead dual-in-line IC package.

PI0512HSN, PI1024HSN

댓글을 달아 주세요 Comment

The AFM04P3-212, 213 are high performance power GaAs MESFET chips having a gate length of 0.25 mm and a total gate periphery of 400 mm. These devices have excellent gain and power performance through 26 GHz, making them suitable for a wide range of commercial and military applications in oscillator and amplifier circuits.They also have excellent noise performance and can be used in the first and second stage of low noise amplifier design. The AFM04P3 employs Ti/Pd/Au gate metallization and surface passivation to ensure a rugged, reliable part.

*Low Noise Figure, 0.6 dB @ 4 GHz
*20 dBm Output Power @ 18 GHz
*High Associated Gain, 13 dB @ 4 GHz
*High Power Added Efficiency, 25%
*Broadband Operation, DC–26 GHz
*Available in Tape and Reel Packaging


댓글을 달아 주세요 Comment

General Description
ASM8P18xx is a high performance, adjustable frequency, PWM controller with an integrated spread spectrum modulator for EMI reduction. It contains all the functions of a standard PWM controller along with a user configurable spread spectrum modulation with adjustable spread. ASM8P18xx allows significant system cost savings by reducing the number of PCB layers and shielding that are traditionally required to pass EMI regulation.
ASM8P18xx is the industry’s first general purpose EMI reduction IC, specifically designed for use in SMPS systems. ASM8P18xx is compatible to any other 3842 PWM controllers.
ASM8P18xx is capable of driving 1A maximum current output and it covers a wide supply voltage range from 7V DC to 30V DC. The PWM frequency is selectable from 40 KHz to 400 KHz.
ASM8P18xx provides under voltage lockout, thermal shutdown, overload, and undercurrent protection. It is available in 8-pin MicroSO, P-DIP and SOIC package.

*30V maximum operating voltage with CMOS technology
*Adjustable PWM frequencies (40 KHz to 400 KHz)
*Maximum Output drive current of 1A.
*Wide duty cycle range (0% minimum to 95% maximum)
*Spread spectrum modulation with adjustable spread.
*Under voltage lockout with hysteresis.
*Low startup current: 275?A maximum
*Pin compatible with industry standard 3842 PWM controller.
*Temperature range –40°C to +85°C.
*Thermal shutdown, overload and undercurrent protection.
*Frequency skip mode.
*Available in 8-pin plastic MicroSO, P-DIP and SOIC packages.

*Off-line converter
*DC-DC converter
*Monitor power supply
*Computer/DVD/STB power supply
*Wireless base station power supply
*Telecom power supply

ASM8P18S42ER, ASM8P1843, ASM8P18S43ER, ASM8P18S44ER, ASM8P18S45ER

댓글을 달아 주세요 Comment

The A4447 is a 2 A, high efficiency general-purpose buck regulator designed for a wide variety of applications. The output voltage is adjustable from 0.8 to 24 V, based on a resistor divider and the 0.8 V ± 2 % reference. External components include an external clamping diode, inductor, and filter capacitor. The off-time is determined by an external resistor to ground. It operates in both continuous and discontinuous modes to maintain light load regulation. An internal blanking circuit is used to filter out transients due to the reverse recovery of the external clamp diode. Typical blanking time is 200 ns.
This new device is ideal for various end products including applications with 8 to 50 V input voltage range and require up to 2 A output current, such as uninterruptible power supplies, point of sale (POS) applications, and industrial applications with 24 or 36 V bus.

Features and Benefits
*Wide input voltage range: 8 to 50 V
*Integrated low RDS(on) DMOS switch
*2 A continuous output current
*Adjustable fixed off-time
*Highly efficient
*Adjustable output: 0.8 to 24 V
*Small package with exposed thermal pad

Applications include
*Printer power supplies
*Office automation equipment
*POS thermal, laser, photo, and inkjet printers
*Tape drives
*Industrial applications


댓글을 달아 주세요 Comment

The Agilent E1418A 8/16-Channel D/A Converter is a C–size, 1-slot, register-based VXI module. It
consists of 8 or 16 fully independent, isolated or non-isolated, 16-bit D/As. Each channel can be set to voltage or current mode with local or remote sensing on voltage outputs. All outputs can be updated with registerlevel programming to allow fast backplane access. Each channel can be updated individually, or by using the internal data buffer, synchronized so that all channels change simultaneously. The channel output mode is set with jumpers in the terminal block for each channel or by register programming. Each D/A converter can be calibrated without removal through software commands and use of the terminal block CALBUS in conjunction with a 5.5-digit multimeter. The on/off terminal block has standard screw terminals for fi eld wiring.
Refer to the Agilent Technologies Website for instrument driver availability and downloading instructions, as well as for recent product updates, if applicable.

*1-Slot, C-size, register based
*8/16 independent channels, fl exible and confi gurable
*Individual isolation per channel
*16-bit resolution D/A per channel
*Programmable selectable voltage/current modes
*Software controlled calibration

E1418A001, E1418A002, E1418A003, E1418AA3E, E1418AA3H
TAG Converter, D/A

댓글을 달아 주세요 Comment

The Aeroflex Laboratories transceiver model ACT4444 is a monolithic transceiver which provides full compliance with Macair and MIL-STD-1553 data bus requirements. The model ACT4444 performs the front-end analog function of inputting and outputting data through a transformer to a MIL-STD-1553 or Macair data bus with a few external components.
The ACT4444 can be considered a "Universal" Transceiver in that it is compatible with MIL-STD-1553A, B, Macair A-3818, A-4905, A-5232 and A-5690.
Design of these transceivers reflects particular attention to active filter performance. This results in low bit and word error rate with superior waveform purity and minimal zero crossover distortion. The ACT4444 active filter design has additional high frequency roll-off to provide the required Macair low harmonic distortion waveform without increasing the pulse delay characteristics significantly.
Efficient transmitter electrical and thermal design provides low internal power dissipation and heat rise at high and well as low duty cycles.
An optional receiver input threshold adjustment can be accomplished by the use of the "External Threshold" terminals.

*Transceiver meets MIL-STD-1553A & B, Macair A3818, A4905, A5232 and A5690 specs
*Bipolar Supply ±15V to ±12V, Logic Supply +5V
*Replacement for function of CT3232 & ACT4404 in new designs
*Voltage source output
*Monolithic construction
*Aeroflex is a Class H & K MIL-PRF-38534 Manufacturer
*Miniature Chipscale Package Bumped Chip Carrier™ (BCC++)

댓글을 달아 주세요 Comment